CSN 25 5162-1957 The control and drawing sets The drawing angles 45 degree《绘图三角》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AECMA PREN 2002-16-2000 Aerospace Series Metallic Materials Test Methods Part 16 Non-Destructive Testing Penetrant Testing Edition P 1《航空航天系列 金属材料 试验方法.第16部分 无损检验.渗透检验.P1版》.pdf

AECMA PREN 2002-17-1991 Aerospace Series Test Methods for Metallic Materials Tube Used Under Pressure Part 17 - Integrity Test Issue P1《航空航天系列 金属材料 试验方法.第17部分 完整性测试.P1版》.pdf

AECMA PREN 2002-18-1991 Aerospace Series Test Methods for Metallic Materials Part 18 - Hydraulic Distension Test for Tube Issue P1《航空航天系列 金属材料 试验方法.第18部分 钢管液压扩张测试.P1版》.pdf

AECMA PREN 2002-2-2003 Aerospace Series Metallic Materials Test Methods Part 2 Tensile Testing at Elevated Temperature Edition P 3《航空航天系列.金属材料测试方法.第1部分 环高温拉伸试验P3版》.pdf

AECMA PREN 2002-20-1996 Aerospace Series Test Methods for Metallic Materials Part 20 Eddy Current Testing of Circular Cross-Section Tubes Edition P 1《航空航天系列 金属材料 试验方法.第20部分 圆截面钢管涡.pdf

AECMA PREN 2002-21-2000 Aerospace Series Metallic Materials Test Methods Part 21 Radiographic Testing of Castings Edition P 2《航空航天系列.金属材料 试验方法.第21部分：铸件的X射线照相试验.P2版》.pdf

AECMA PREN 2002-23-1991 Aerospace Series Test Methods for Metallic Materials Part 23 - Sharp-Notch Tension Testing Issue P 1《航空航天系列 金属材料 试验方法.第23部分 锐切口张力试验.P1版》.pdf

AECMA PREN 2002-3-1975 Test Methods for Metallic Materials Part 3 Load Calibration of Tensile Testing Machines Aerospace Series Edition 1《航空航天系列.金属材料的试验方法.第3部分 拉力试验机的-荷校准.第.第1版》.pdf

AECMA PREN 2002-4-1975 Test Methods for Metallic Materials Part 4 Calibration of Dynamometric Calibration Devices Aerospace Series Edition 1《航空航天系列.金属材料的试验方法.第4部分 测力校准机的校准.第.第1版》.pdf