CSN 25 7510-1965 Official measuring and checking of transport barrels《运输桶的官方测量与检查》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

STAS SR EN ISO 1924-2-1996 Paper and board - Determination of tensile properties Part 2 Constant rate of elongation method《纸和纸板．拉伸性能的测定．第2部分：恒速率延伸法》.pdf

STAS SR EN ISO 2064-1996 Metallic and other non-organic coatings - Definitions and conventions conceming the measurement of thickness《金属和其它非有机涂料．有关厚度测量的定义和协定 》.pdf

STAS SR EN ISO 2812-1-1996 Paints and varnishes - Determination of resistance to liquids -Part 1 General methods 《油漆和清漆．抗液体测试．第1部分：一般方法》.pdf

STAS SR EN ISO 2812-2-1996 Paints and varnishes - Determination of resistance to liquids Part 2 Water immersion method《油漆和清漆．抗液体测试．第1部分：一般方法》.pdf

STAS SR EN ISO 2819-1996 Metallic coatings on metallic substrates Electrodeposited and chemically deposited coatings Review of methods svailable for testing adhesion《金属基板上的金属涂层.电极和.pdf

STAS SR EN ISO 4524-6-1995 Metallic coatings-Test methods for electrodeposited goid and gold alloy coatings Part 6 Determination of the presence of residual salts《金属层．电镀金和金合金层测试方法.pdf

STAS SR EN ISO 6272-1995 Paints and varnishes - Falling weight test《涂料和清漆．冲击试验 》.pdf

STAS SR EN ISO 7263-1996 Corrugating medium - Determination of the flat crush resistance after laboratory fluting《瓦楞原纸．实验室起楞后平压强度的测定 》.pdf

STAS SR EN ISO 7287-1996 Graphical symbols for thermal cutting equipment《热切割设备图形符号》.pdf