CSN 34 2100-1977 CSN electric-engineering regulations Rules for overhead communication lines《高架通信线路规则》.pdf

相关资源

YD 5102-2010 通信线路工程设计规范.pdf

YD 5051-1997 本地网通信线路工程验收规范.pdf

YD 5102-2010 通信线路工程设计规范.pdf

YD 5137-2005 本地通信线路工程设计规范.pdf

YD T 206.1-1997 架空通信线路铁件 通用技术条件.pdf

YD T 206.10-1997 架空通信线路铁件 带头穿钉.pdf

YD T 206.11-1997 架空通信线路铁件 无头穿钉.pdf

YD T 206.12-1997 架空通信线路铁件 木螺钉.pdf

YD T 206.19-1997 架空通信线路铁件 钢地锚.pdf

YD T 206.2-1997 架空通信线路铁件 线担类.pdf

猜你喜欢

AGMA 09FTM04-2009 New Developments in Gear Hobbing《齿轮滚刀加工的新发展》.pdf

AGMA 09FTM05-2009 Hypoloid Gears with Small Shaft Angles and Zero to Large Offsets《小轴间角和偏心距大于零的双曲线齿轮》.pdf

AGMA 09FTM06-2009 Dependency of the Peak-to-Peak-Transmission-Error on the Type of Profile Correction and the Transverse Contact Ratio of the Gear Pair《齿轮副轮廓修形和端面啮合度峰到峰传输错误的相关性》.pdf

AGMA 09FTM07-2009 Optimizing Gear Geometry for Minimum Transmission Error Mesh Friction Losses and Scuffing Risk Through Computer Aided Engineering《通过计算机辅助工程优化齿轮的最小传输错误、啮合摩擦损耗和胶合风险.pdf

AGMA 09FTM08-2009 Load Sharing Analysis of High Contact Ratio Spur Gears in Military Tracked Vehicle Application《军用履带车辆上高啮合系数直齿轮的负载共享分析》.pdf

AGMA 09FTM09-2009 Designing for Static and Dynamic Loading of a Gear Reducer Housing with FEA《带FEA的齿轮减速器壳体静态和动态负载的设计》.pdf

AGMA 09FTM10-2009 The Effect of Flexible Components on the Durability Whine Rattle and Efficiency of an Automotive Transaxle Geartrain System《挠性组件对汽车变速驱动桥齿轮组系统耐久性、噪声和效率的影响》.pdf

AGMA 09FTM11-2009 Unique Design Constraints for Molded Plastic Transmissions《模型塑料传送的唯一设计约束》.pdf

AGMA 09FTM12-2009 The Anatomy of a Micropitting Induced Tooth Fracture Failure - Causation Initiation Progression and Prevention《含断齿故障的微点蚀的分解.起因、开始、前进和防护》.pdf