CSN 42 0276-1969 Steel smith forgings in usual workmanship Technical delivery requirements《常规工艺下的钢锻件 交货技术要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JB T 2231.5-1999 往复活塞压缩机零部件第5部分 气阀安装尺寸.pdf

JB T 2231.5-2013 往复活塞压缩机零部件 第5部分：气阀安装尺寸.pdf

JB T 2236-1991 往复活塞压缩机连杆小头衬套.pdf

JB T 2236-2005 往复活塞压缩机 连杆小头衬套.pdf

JB T 2254.1-2011 坐标镗床 第1部分 精度检验.pdf

JB T 2254.2-2007 坐标镗床 第2部分 技术条件.pdf

JB T 2254.3-2014 坐标镗床第3部分：3∶20锥度孔的主轴端部尺寸.pdf

JB T 2254.4-2013 坐标镗床 第4部分：型式与参数.pdf

JB T 2255.1-1999 坐标镗床转台 精度检验.pdf