CSN 42 2958-1970 Cr-Ni-Mo-Cu steel for castings 42 2958《Cr-Ni-Mo-Cu铸造钢 42 2958》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D2838-2018 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting《塑料薄膜和薄板收缩张力和取向释放应力的标准试验方法》.pdf

ASTM D2839-2005 Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene《利用熔体指数纤维测定聚乙烯密度的标准实施规程》.pdf

ASTM D2839-2010 Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene《利用熔体指数纤维测定聚乙烯密度的标准实施规程》.pdf

ASTM D2839-2016 Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene《用绞线熔融指数测定聚乙烯密度的规程》.pdf

ASTM D2842-2006 Standard Test Method for Water Absorption of Rigid Cellular Plastics《硬质泡沫塑料的吸水性用标准试验方法》.pdf

ASTM D2842-2012 Standard Test Method for Water Absorption of Rigid Cellular Plastics《硬质泡沫塑料吸水性的标准试验方法》.pdf

ASTM D2843-1999(2004)e1 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics《塑料燃烧或分解所产生的烟雾密度的标准试验方法》.pdf

ASTM D2843-2010 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics《塑料燃烧或分解生烟的密度的标准试验方法》.pdf

ASTM D2843-2016 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics《塑料燃烧或者分解产生的烟气的密度的标准试验方法》.pdf