CSN ISO 8813-1994 Earth-moving machinery Lift capacity of pipelayers and wheeled tractors or loaders equipped with side boom《土方机械 配备侧起重臂的铺管机和轮式拖拉机或装载机的提升能力》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AGMA 02FTM5-2002 Crack Length and Depth Determination in an Integrated Carburized Gear Bearing《综合渗碳齿轮 轴承中裂缝长度和深度测定》.pdf

AGMA 02FTM6-2002 Contemporary Gear Hobbing - Tools and Process Strategies《当代滚齿.工具和加工策略》.pdf

AGMA 02FTM7-2002 Selecting the Best Carburizing Method for the Heat Treatment of Gears《齿轮的热处理用最优渗碳方法的选择》.pdf

AGMA 02FTM8-2002 Compliant Spindles in Lapping and Testing Machines《研磨和试验机的兼容纱锭》.pdf

AGMA 02FTM9-2002 Gear RollScan for High Speed Gear Measurement《高速齿轮测量用齿轮滚动扫描》.pdf

AGMA 02FTMS1-2002 Design and Stress Analysis of New Version of Novikov-Wildhaber Helical Gears《Novikov-Wildhaber螺旋齿轮新版本的设计和应力分析》.pdf

AGMA 04FTM1-2004 Gear Noise - Challenge and Success Based on Optimized Gear Geometries《齿轮噪音.基于最优化齿轮几何学的挑战和成效》.pdf

AGMA 04FTM10-2004 The Failure Investigation and Replacement of a Large Marine Gear《大型船用齿轮的故障调查和更换》.pdf

AGMA 04FTM11-2004 Gear Lubrication as a Reliability Partner《作为可靠性合作伙伴的齿轮传动装置润滑》.pdf