CSN ON 11 1211-1966 《排气阀的最大压力为100kp 厘米2 ，温度200 ℃ 3 ）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D6990-2005(2011) 3750 Standard Practice for Evaluating Biofouling Resistance and Physical Performance of Marine Coating Systems《船舶涂层系统的抗生物污垢和物理性能的评估标准操作规程》.pdf

ASTM D6991-2005 Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method《用悬臂梁法测量有机涂层内部应力的标准试验方法》.pdf

ASTM D6991-2005(2010) 9375 Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method《用悬臂式测定法测量有机涂层中内应力的标准试验方法》.pdf

ASTM D6991-2017 6875 Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method《利用悬臂(梁)法测量有机涂层内应力的标准试验方法》.pdf

ASTM D6991-2017e1 1250 Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method《利用悬臂(梁)法测量有机涂层内应力的标准试验方法》.pdf

ASTM D6992-2003 Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal .pdf

ASTM D6992-2003(2009) 895 Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped I.pdf

ASTM D6992-2003(2015) 7948 Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped .pdf

ASTM D6992-2016 red 6306 Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Is.pdf