CSN ON 20 4103-1966 《钻井与滑套和附件 基本和连接规格》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS ISO 1431-3-2017 Rubber vulcanized or thermoplastic Resistance to ozone cracking Reference and alternative methods for determining the ozone concentration in laboratory test cham.pdf

BS ISO 14317-2015 Sintered metal materials excluding hardmetals Determination of compressive yield strength《非硬质金属的烧结金属材料 耐压屈服强度的测定》.pdf

BS ISO 1432-2013 Rubber vulcanized or thermoplastic Determination of low-temperature stiffening (Gehman test)《硫化或热塑性橡胶 低温硬化测定(Gehman试验)》.pdf

BS ISO 14322-2012 Plastics Epoxy resins Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry《塑料 环氧树脂 利用差示扫描量热法进行交联环氧树脂的交联度测定》.pdf

BS ISO 1434-2016 Natural rubber in bales Amount of bale coating Determination《包装式天然橡胶 包装涂层量的测定》.pdf

BS ISO 14346-2013 Static design procedure for welded hollow-section joints Recommendations《焊接中空截面接口的静态设计规程 推荐性操作规程》.pdf

BS ISO 14347-2008 Fatigue - Design procedure for welded hollow-section joints - Recommendations《疲劳 焊接中空部件连接件用设计程序 建议》.pdf

BS ISO 1436-2017 Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types for oil-based or water-based fluids Specification《橡胶软管和软管组件 油质或水质流体用金属丝编织增强液压型管 规范》.pdf

BS ISO 14368-1-2001 Mineral and sapphire watch-glasses - Dimensions and tolerances《无机和青玉表面玻璃 尺寸和公差》.pdf