1、BSI Standards PublicationPD CLC/TS 50136-9:2013Alarm systems Alarm transmission systems and equipmentPart 9: Requirements for common protocol for alarm transmission using the Internet protocolTECHNICAL SPECIFICATION CLC/TS 50136-9 SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION January 2013 CENELEC
2、European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide fo
3、r CENELEC members. Ref. No. CLC/TS 50136-9:2013 E ICS 13.320; 33.040.40 English version Alarm systems - Alarm transmission systems and equipment - Part 9: Requirements for common protocol for alarm transmission using the Internet protocol Systmes dalarmes - Systmes et quipements de transmission dala
4、rme - Partie 9 : Exigences pour le protocole commun de transmission dalarme utilisant le protocole Internet Alarmanlagen - Alarmbertragungsanlagen und einrichtungen - Teil 9: Anforderungen an standardisierte Protokolle zur Alarmbertragung unter Nutzung des Internetprotokolls This Technical Specifica
5、tion was approved by CENELEC on 2012-11-12. CENELEC members are required to announce the existence of this TS in the same way as for an EN and to make the TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force. CENELEC member
6、s are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norwa
7、y, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. PD CLC/TS 50136-9:2013 PUBLISHED DOCUMENTNational forewordThis Published Document is the UK implementation of CLC/TS 50136-9:2013.It should be noted that the common Internet Protocol Specific
8、ation CLC/TS 50136-9:2013 is voluntary. Any Internet protocol standard can be used as long as it meets the requirements of EN 50136-1:2012.The UK participation in its preparation was entrusted by Technical Committee GW/1, Electronic security systems, to Subcommittee GW/1/5, Transmission equipment an
9、d networks.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.ISBN 978 0 580 78417 0ICS 13.320; 33.040.40This P
10、ublished Document was published under the authority of the Standards Policy and Strategy Committee on 30 September 2013. The British Standards Institution 2013. Published by BSI Standards Limited 2013Amendments/corrigenda issued since publicationDate Text affectedTECHNICAL SPECIFICATION CLC/TS 50136
11、-9 SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION January 2013 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All r
12、ights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. CLC/TS 50136-9:2013 E ICS 13.320; 33.040.40 English version Alarm systems - Alarm transmission systems and equipment - Part 9: Requirements for common protocol for alarm transmission using the Interne
13、t protocol Systmes dalarmes - Systmes et quipements de transmission dalarme - Partie 9 : Exigences pour le protocole commun de transmission dalarme utilisant le protocole Internet Alarmanlagen - Alarmbertragungsanlagen und einrichtungen - Teil 9: Anforderungen an standardisierte Protokolle zur Alarm
14、bertragung unter Nutzung des Internetprotokolls This Technical Specification was approved by CENELEC on 2012-11-12. CENELEC members are required to announce the existence of this TS in the same way as for an EN and to make the TS available promptly at national level in an appropriate form. It is per
15、missible to keep conflicting national standards in force. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Irel
16、and, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. CLC/TS 50136-9:2013 - 2 - Contents Foreword . 4 1 Scope . 5 2 Normative references . 5 3 Terms, definitions and abbrevi
17、ations . 5 3.1 Terms and definitions . 5 3.2 Abbreviations 5 4 Objective 6 5 Messaging . 6 5.1 General . 6 5.2 Message format overview . 7 5.3 Padding and message length .11 5.4 Hashing .12 5.5 Encryption .12 5.6 Timeouts and retries .13 5.7 Version number 13 5.8 Reverse commands 13 5.9 Initial valu
18、es 14 6 Message types 14 6.1 General .14 6.2 Path supervision .14 6.3 Event reporting .15 6.4 Configuration messages .19 7 Commissioning and connection setup 27 7.1 Commissioning .27 7.2 Connection setup 31 Annex A (normative) Result codes 32 Annex B (normative) Protocol Identifiers .33 Annex C (nor
19、mative) Shared secret 34 C.1 Formatting of the shared secret34 C.2 Checksum for Shared Secret Formatting .34 C.3 Example of Secret Encoding and Formatting .34 Annex D (informative) Examples of messaging sequences .35 D.1 Commissioning .35 D.2 Connection setup 38 Annex E (informative) Examples of app
20、lication protocols .41 E.1 SIA 41 E.2 Ademco Contact ID 41 E.3 Scancom Fast Format 42 E.4 VdS 2465 42 Annex F (informative) Design principles 44 F.1 General .44 F.2 Information Security 44 F.3 Use of UDP signalling .44 Bibliography 45 - 3 - CLC/TS 50136-9:2013 Table 1 Identifiers 7 Table 2 Basic une
21、ncrypted format of messages . 7 Table 3 Basic encrypted format of messages 8 Table 4 Message ID overview . 10 Table 5 Flags . 11 Table 6 Hashing IDs . 12 Table 7 Encryption IDs . 12 Table 8 Reverse commands 14 Table 9 Initial values 14 Table 10 Poll message SPT RCT . 15 Table 11 Poll response RCT SP
22、T . 15 Table 12 Event message format SPT RCT 16 Table 13 Event message format Fields 16 Table 14 Event field . 16 Table 15 Time event field 17 Table 16 Time message field. 17 Table 17 Link field IP Address 17 Table 18 Link field IP Port number . 18 Table 19 Link field URL 18 Table 20 Link field File
23、name . 18 Table 21 Event response message format 18 Table 22 Connection handle request message format 19 Table 23 Connection handle response message format . 20 Table 24 Device ID request message format. 20 Table 25 Device ID request flags . 20 Table 26 Device ID response message format 21 Table 27
24、Encryption selection request message format 21 Table 28 Master Encryption Selection request flag 21 Table 29 Encryption selection response message format . 22 Table 30 Encryption key exchange request message format 22 Table 31 Master Key request flag 22 Table 32 Encryption key exchange response mess
25、age format . 23 Table 33 Hash selection request message format . 23 Table 34 Hash selection response message format 23 Table 35 Path supervision request message format 24 Table 36 Path supervision response message format . 24 Table 37 Set time command message format . 24 Table 38 Set time response m
26、essage format 25 Table 39 Protocol version request message format 25 Table 40 Protocol version response message format 25 Table 41 Transparent message format 25 Table 42 Transparent response format . 26 Table 43 DTLS completed request message format . 26 Table 44 DTLS completed response message form
27、at . 26 Table 45 RCT IP parameter request message format . 27 Table 46 RCT IP parameter response message format 27 Table 47 Message flow during the commissioning of a new SPT 28 Table 48 Message flow during connection setup . 31 Table A.1 Result codes . 32 Table B.1 Protocol identifiers . 33 PD CLC/
28、TC 50136-9:2013CLC/TS 50136-9:2013 2 CLC/TS 50136-9:2013 - 2 - Contents Foreword . 4 1 Scope . 5 2 Normative references . 5 3 Terms, definitions and abbreviations . 5 3.1 Terms and definitions . 5 3.2 Abbreviations 5 4 Objective 6 5 Messaging . 6 5.1 General . 6 5.2 Message format overview . 7 5.3 P
29、adding and message length .11 5.4 Hashing .12 5.5 Encryption .12 5.6 Timeouts and retries .13 5.7 Version number 13 5.8 Reverse commands 13 5.9 Initial values 14 6 Message types 14 6.1 General .14 6.2 Path supervision .14 6.3 Event reporting .15 6.4 Configuration messages .19 7 Commissioning and con
30、nection setup 27 7.1 Commissioning .27 7.2 Connection setup 31 Annex A (normative) Result codes 32 Annex B (normative) Protocol Identifiers .33 Annex C (normative) Shared secret 34 C.1 Formatting of the shared secret34 C.2 Checksum for Shared Secret Formatting .34 C.3 Example of Secret Encoding and
31、Formatting .34 Annex D (informative) Examples of messaging sequences .35 D.1 Commissioning .35 D.2 Connection setup 38 Annex E (informative) Examples of application protocols .41 E.1 SIA 41 E.2 Ademco Contact ID 41 E.3 Scancom Fast Format 42 E.4 VdS 2465 42 Annex F (informative) Design principles 44
32、 F.1 General .44 F.2 Information Security 44 F.3 Use of UDP signalling .44 Bibliography 45 - 3 - CLC/TS 50136-9:2013 Table 1 Identifiers 7 Table 2 Basic unencrypted format of messages . 7 Table 3 Basic encrypted format of messages 8 Table 4 Message ID overview . 10 Table 5 Flags . 11 Table 6 Hashing
33、 IDs . 12 Table 7 Encryption IDs . 12 Table 8 Reverse commands 14 Table 9 Initial values 14 Table 10 Poll message SPT RCT . 15 Table 11 Poll response RCT SPT . 15 Table 12 Event message format SPT RCT 16 Table 13 Event message format Fields 16 Table 14 Event field . 16 Table 15 Time event field 17 T
34、able 16 Time message field. 17 Table 17 Link field IP Address 17 Table 18 Link field IP Port number . 18 Table 19 Link field URL 18 Table 20 Link field Filename . 18 Table 21 Event response message format 18 Table 22 Connection handle request message format 19 Table 23 Connection handle response mes
35、sage format . 20 Table 24 Device ID request message format. 20 Table 25 Device ID request flags . 20 Table 26 Device ID response message format 21 Table 27 Encryption selection request message format 21 Table 28 Master Encryption Selection request flag 21 Table 29 Encryption selection response messa
36、ge format . 22 Table 30 Encryption key exchange request message format 22 Table 31 Master Key request flag 22 Table 32 Encryption key exchange response message format . 23 Table 33 Hash selection request message format . 23 Table 34 Hash selection response message format 23 Table 35 Path supervision
37、 request message format 24 Table 36 Path supervision response message format . 24 Table 37 Set time command message format . 24 Table 38 Set time response message format 25 Table 39 Protocol version request message format 25 Table 40 Protocol version response message format 25 Table 41 Transparent m
38、essage format 25 Table 42 Transparent response format . 26 Table 43 DTLS completed request message format . 26 Table 44 DTLS completed response message format . 26 Table 45 RCT IP parameter request message format . 27 Table 46 RCT IP parameter response message format 27 Table 47 Message flow during
39、the commissioning of a new SPT 28 Table 48 Message flow during connection setup . 31 Table A.1 Result codes . 32 Table B.1 Protocol identifiers . 33 PD CLC/TC 50136-9:2013CLC/TS 50136-9:2013 3 CLC/TS 50136-9:2013 - 4 - Foreword This document (CLC/TS 50136-9:2013) has been prepared by CLC/TC 79 “Alar
40、m systems“. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. - 5 - CLC/TS 50136-9:2013 1 Scope This Technical Specification specifies a
41、 protocol for point-to-point transmission of alarms and faults, as well as communications monitoring, between a Supervised Premises Transceiver and a Receiving Centre Transceiver using the Internet protocol (IP). The protocol is intended for use over any network that supports the transmission of IP
42、data. These include Ethernet, xDSL, GPRS, WiFi, UMTS and WIMAX. The system performance characteristics for alarm transmission are specified in EN 50136-1. The performance characteristics of the supervised premises equipment should comply with the requirements of its associated alarm system standard
43、and shall apply for transmission of all types of alarms including, but not limited to, fire, intrusion, access control and social alarms. Compliance with this Technical Specification is voluntary. 2 Normative references The following documents, in whole or in part, are normatively referenced in this
44、 document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 50136-1:2012, Alarm systems Alarm transmission systems and equipment Part 1: General
45、 requirements for alarm transmission systems 3 Terms, definitions and abbreviations 3.1 Terms and definitions For the purposes of this document, the terms and definitions given in EN 50136-1:2012 apply. 3.2 Abbreviations For the purposes of this document, the following abbreviations apply. AES Advan
46、ced Encryption Standard ARC Alarm Receiving Centre ATS Alarm Transmission System CA X.509 Certificate Authority CBC Cipher Block Chaining CRC Cyclic redundancy check DNS Domain Name System DTLS Datagram Transport Layer Security HL Header Length IP Internet Protocol IV Initialization Vector MAC Media
47、 Access Control MTU Maximum Transmission Unit NAT Network Address Translation NIST National Institute of Standards and Technology NTP Network Time Protocol NVM Non-Volatile Memory P-MTU Path Maximum Transmission Unit PD CLC/TC 50136-9:2013CLC/TS 50136-9:2013 4 CLC/TS 50136-9:2013 - 4 - Foreword This
48、 document (CLC/TS 50136-9:2013) has been prepared by CLC/TC 79 “Alarm systems“. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. - 5 - CLC/TS 50136-9:2013 1 Scope This Technical Specification specifies a protocol for point-to-point transmission of alarms and faults, as well as communications monitoring, between a Supervised Premises Transceiver and a Receiving Centre Transceiver using the Internet protocol (IP). The protocol i
