CNS 10488-1983 Steel Die Forgings Technical Conditions of Delivery《钢模锻件–技术性交货条件》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JB T 7368-2015 工业过程控制系统用阀门定位器.pdf

JB T 7374-2015 气动空气过滤器 技术条件.pdf

JB T 7377-2007 缸内径32～250mm整体式安装单杆气缸 安装尺寸.pdf

JB T 7378-2010 烧结铁基制品.碳氮共渗层深度的金相法测定.pdf

JB T 7381-2010 粉末冶金含油轴承PV值测定.pdf

JB T 7384.13-1994 紧固件.自攻锁紧螺钉外接圆直径量规.pdf

JB T 7384.14-1994 紧固件.木螺钉螺纹小径卡尺.pdf

JB T 7384.2-1994 紧固件.沉头及半沉头头部高度检验模.pdf

JB T 7384.3-1994 紧固件.头部高度及开槽与支承面间的厚度检验模.pdf