CNS 11121-1984 Method for Determination of True Relative Density Apparent Relative Density and Porosity of Coke《焦炭真密度、视密度及孔隙度测定法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS DD 183-1989 Specification for universal modular fuses《通用模块式熔断器规范》.pdf

BS DD 203-1-1991 Industrial automation shop floor production - Reference model for standardization and a methodology for identification of requirements《工业自动化 车间生产 确定要求的标准化和方法学参照模型》.pdf

BS DD 203-2-1991 Industrial automation shop floor production - Application of the reference model for standardization and methodology《工业自动化 车间生产 标准化和方法学参照模型的应用》.pdf

BS DD 208-1992 Piston rings up to 200 mm diameter for reciprocating internal combustion engines specification for rectangular rings with narrow ring width《往复式内燃机用的直径为200mm及其以下的活塞环 .pdf

BS DD 209-1992 Piston rings up to 200 mm diameter for reciprocating internal combustion engines specification for half keystone rings《往复式内燃机用的直径为200mm及其以下的活塞环 半梯形活塞环规范》.pdf

BS DD 216-1993 Method for determination of chloride content of fresh concrete《新鲜混凝土中氯化物含量的测定方法》.pdf

BS DD 221-1997 General guidance for the marking of gas appliances《气体器具作标记的一般指南》.pdf

BS DD 234-1996 Grading polished diamonds - Terminology and classification《分级抛光的钻石 术语和分类》.pdf

BS DD 243-2004 Installation and configuration of intruder alarm systems designed to generate confirmed alarm conditions - Code of practice《设计为能够稳定报警的防盗报警系统的安装和布置 实施规范》.pdf