CNS 11157-1984 Lubrication Holes Grooves and Bore Reliefs《润滑孔、润滑槽、润滑坑》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS 2TA 49-2009 Specification for bar and section for machining of titanium-aluminium- molybdenum-tin-silicon-carbon alloy (Tensile strength 1000-1200 MPa) (Limiting ruling section .pdf

BS 2TA 50-2009 Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 MPa) (limiting ruling section over 100 mm up to and i.pdf

BS 2TA 52-2009 Specification for sheet and strip of titanium- copper alloy (tensile strength 690-920 MPa)《钛-铜合金薄板材和带材规范(抗拉强度690-920 MPa)》.pdf

BS 2TA 56-2009 Specification for plate of titanium-aluminium-vanadium alloy (tensile strength 895-1150 MPa) (maximum thickness 100 mm)《钛-铝-钒合金薄板规范(抗拉强度895-1150 MPa)(抗拉强度895-1150 MP.pdf

BS 2TA 57-2009 Specification for plate of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1030-1220 MPa) (thickness over 50 mm up to and including 65 mm)《钛-铝-钼-锡-.pdf

BS 2TA 58-2009 Specification for plate of titanium-copper alloy (tensile strength 520-640 MPa) (maximum thickness 10 mm)《钛铜的合金板材规范(抗拉强度520-640MPa)(最大厚度10 mm)》.pdf

BS 2TA 59-2009 Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 920-1180 MPa)《钛-铝-钒合金薄板材规范(抗拉强度920-1180 MPa)》.pdf

BS 2V 35-1966 Specification for plywood for aeronautical purposes《航空用胶合板规范》.pdf

BS 2V 37-1968 Specification for Sitka spruce as finished timber《精加工的西加方杉木材规范》.pdf