CNS 11541-1986 Method of Test for Oleoresinous Varnish《油性凡立水检验法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F2228-2013 Standard Test Method for Non-Destructive Detection of Leaks in Packaging Which Incorporates Porous Barrier Material by CO2 Tracer Gas Method《采用二氧化碳示踪气体法对多孔防渗透材料的包装泄.pdf

ASTM F2229-2007 Standard Specification for Wrought Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS.pdf

ASTM F2229-2012 Standard Specification for Wrought Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS.pdf

ASTM F2230-2002 Standard Guide for In-situ Burning of Oil Spills on Water Ice Conditions《水面漏油现场燃烧的标准指南 冻结条件》.pdf

ASTM F2230-2008 Standard Guide for In-situ Burning of Oil Spills on Water Ice Conditions《水中－冰情况下油泄漏的现场燃烧的标准指南》.pdf

ASTM F2230-2014 Standard Guide for In-situ Burning of Oil Spills on Water Ice Conditions《水上溢油的现场燃烧标准指南 结冰条件下》.pdf

ASTM F2231-2002(2008) Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes《压力管道用聚乙烯薄样品的却贝冲击试验的标准试验方法》.pdf

ASTM F2231-2002(2013) Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes《压力管道用聚乙烯薄样品的却贝冲击试验的标准试验方法》.pdf

ASTM F2231-2002e1 Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes《压力管道用聚乙烯薄样品的却贝冲击试验的标准试验方法》.pdf