CNS 12290-1988 Reliability Assured Fixed Metal Film Resistors (C E)《可靠度保证金属皮膜固定电阻器（特性C及E）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN 10027-2-2015 Designation systems for steels Numerical system《钢标识系统 数值系统》.pdf

BS EN 10028-2-2009 Flat products made of steels for pressure purposes - Part 2 Non-alloy and alloy steels with specified elevated temperature properties《承压钢扁平轧材 第2部分 指定的高温性能的非合金和合金.pdf

BS EN 10028-3-2017 Flat products made of steels for pressure purposes Weldable fine grain steels normalized《承压钢扁平轧材 第3部分 正火处理过的可焊细晶粒钢》.pdf

BS EN 10028-4-2009 Flat products made of steels for pressure purposes - Part 4 Nickel alloy steels with specified low temperature properties《承压钢扁平轧材 第4部分 具有低温特性的镍合金钢》.pdf

BS EN 10028-5-2009 Flat products made of steels for pressure purposes - Part 5 Weldable fine grain steels thermomechanically rolled《承压钢扁平轧材 第5部分 热机轧制可焊细粒钢》.pdf

BS EN 10028-6-2009 Flat products made of steels for pressure purposes - Part 6 Weldable fine grain steels quenched and tempered《压力用的扁平钢轧材规范 第6部分 淬火和回火可焊细粒钢》.pdf

BS EN 10028-7-2016 Flat products made of steels for pressure purposes Stainless steels《压力容器用钢板制品 第7部分 不锈钢》.pdf

BS EN 10029-2010 Hot-rolled steel plates 3 mm thick or above Tolerances on dimensions and shape《厚度3 mm或3 mm以上热轧钢板材尺寸规格 形状和质量公差规范》.pdf

BS EN 10031-2003 Semi finished products for forging Tolerances on dimensions shape and mass《锻造用半成品 形状 质量和尺寸规格公差》.pdf