CNS 12911-1991 Methods of Test for Titanium in Nickel Materials for Electron Tubes《电子管用镍材料中钛检验法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E1685-2000(2006) Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique《使用超声脉冲回波技术测量紧固件长度变化的标准操作规程》.pdf

ASTM E1685-2013 Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique《使用超声脉冲回波技术测量紧固件长度变化的标准规范》.pdf

ASTM E1686-2003 Standard Guide for Selection of Environmental Noise Measurements and Criteria《环境噪声测量和标准选择的标准指南》.pdf

ASTM E1686-2010 Standard Guide for Applying Environmental Noise Measurement Methods and Criteria《应用环境噪音测量方法和准则的标准指南》.pdf

ASTM E1686-2010e1 Standard Guide for Applying Environmental Noise Measurement Methods and Criteria《应用环境噪声测量方法和标准的标准指南》.pdf

ASTM E1686-2016 Standard Guide for Applying Environmental Noise Measurement Methods and Criteria《应用环境噪声测量方法和标准的标准指南》.pdf

ASTM E1687-2004 Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids《金属加工液中初榨油致癌可能性测定的标准试验方法》.pdf

ASTM E1687-2010 Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids《测定金属加工液中的直馏基础油的致癌性的标准试验方法》.pdf

ASTM E1687-2010(2014) Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids《金工流体中原油致癌可能性测定的标准试验方法》.pdf