CNS 13524-1995 2《地理点位置之经度纬度及海拔高度之标准表示法》.pdf

相关资源

COE ETL 1110-1-183-1998 USING DIFFERENTIAL GPS POSITIONING FOR ELEVATION DETERMINATION《差分全球定位系统在海拔高度测量中的应用》.pdf

SAE ARP 1061A-1999 Altitude Alerting Devices and Systems《海拔高度报警装置和系统》.pdf

CNS 10622-1983 Bumper Heights for Automobiles《汽车用保险杠高度》.pdf

CNS 8248-1988 Method of Altitude Test of Carburetors for Automobiles《汽车用化油器高度性能试验法》.pdf

CNS 146-1947 Height of Shaft for Driving and Driven Lines《轴心高度，主动机及从动机》.pdf

CNS 11200-1985 Leveling Valves for Railway Rolling Stock《铁路车辆空气弹簧用高度自动调节阀》.pdf

CNS 5015-1979 Washers for High-Tensile Prestressed Structural Bolting《预力钢架用垫圈（圆形高度预力钢架用）》.pdf

CNS 12075-1987 Wall Thickness and Height for Different Cross Sections of Hot Forging Closed Die《热锻闭合模之不同形状断面最小厚度及最小高度》.pdf

CNS 8755-1987 Method of Test for Thickness or Height of Compacted Bituminous Paving Mixture Specimens《沥青铺面混合料压实试体之厚度或高度试验方法》.pdf

猜你喜欢

BS 2G 147-1-1966 Specification for a c motors for aircraft - Three-phase constant frequency squirrel-cage induction motors《航空器交流电机规格 三相恒频鼠笼式感应电机》.pdf

BS 2G 147-2-1966 Specification for a c motors for aircraft - Three-phase variable frequency squirrel-cage induction motors《航空器交流电动机规格 第2部分 三相变频鼠笼式感应电动机》.pdf

BS 2G 180-1974 Specification for permanent splicing of aircraft electrical cables《飞行器用电缆固定编接规范》.pdf

BS 2G 182-1975 Specification for pressure-driven machmeters for aircraft《航空用压力驱动马赫表规范》.pdf

BS 2G 191-1988 Specification for lighting for aircraft indicators using integral filament lamps《航空用整体白炽灯指示仪照明规范》.pdf

BS 2G 196-1971 Specification for static invertors《静态反向变流器规范》.pdf

BS 2G 199-1984 Schedule for tables relating to altitudes airspeed and Mach numbers for use in aeronautical instrument design and calibration《航空仪表设计和校准用高度、空速和马赫数表》.pdf

BS 2G 201-1996 Specification for counter and pointer pressure altimeters《计数器和指示器压力高度计规范》.pdf

BS 2G 202-1988 Specification for design and performance requirements for airframe-fit electrical connectors for d c and low frequency a c applications《直流和低频交流用安装在机体上的电连接器的设计和性能要求规范.pdf