CNS 2524-1973 Method of Test for Potassium Chromate (Technical Grade)《铬酸钾（工业级）检验法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E2251-2014 Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids《带低危害精密液体的玻管液体ASTM温度计的标准规格》.pdf

ASTM E2252-2004 Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities《住宅设施或儿童用具中已知风险用铅危害降低方法选定的标.pdf

ASTM E2252-2012 Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities《住房或者儿童设施已识别风险用铅危害降低方法选择的标准.pdf

ASTM E2252-2018 Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities《住宅或儿童居住设施中已识别风险的铅危害减少方法的选择.pdf

ASTM E2253-2003 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters《差示扫描量热计的焓测量有效性的标准方法》.pdf

ASTM E2253-2008 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters.pdf

ASTM E2253-2011 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters《差示扫描热量计制温度和焓测量验证用标准试验方法》.pdf

ASTM E2253-2016 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters《差示扫描量热计温度和焓测量验证的标准试验方法》.pdf

ASTM E2254-2003 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers《动态机械分析仪存储模数校正的标准试验方法》.pdf