CNS 4791-1979 10 mm Φ Grommet Washer《10MM外径双面铜环》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS 1660-1-1992 Machine tapers - Specification for shanks and sockets with self-holding tapers (Morse and metric 5%)《机器用圆锥 第1部分 自动夹紧的(莫氏锥度和5%米制锥度)圆锥工具柄和套筒规范》.pdf

BS 1660-10-1988 Machine tapers - Specification for drill chuck tapers (Jacob and short Morse)《机用圆锥 第10部分 钻头卡盘(雅可布和短莫氏)圆锥规范》.pdf

BS 1660-11-1991 Machine tapers - Specification for gauges《机用锥销 第11部分 量规规范》.pdf

BS 1660-12-1996 Machine tapers - Specification for positive drive of Morse tapers《机床 第12部分 莫氏锥度强制传动规范》.pdf

BS 1660-3-1988 Machine tapers - Specification for turret sockets and reduction sleeves with tapped ends for tools with Morse taper shanks《机用圆锥 第3部分 莫氏锥柄刀具用带锥度端面的回转头套筒和锥形套筒规范》.pdf

BS 1660-4-1989 Machine tapers - Specification for spindle noses and tool shanks with self-release 7 24 tapers《机用锥销 第4部分 自动松开的7 24锥度轴头和刀具柄规范》.pdf

BS 1660-5-1996 Machine tapers - Specification for reduction sleeves with external and internal 7 24 tapers《机械锥销 第5部分 7 24内、外锥度适配器规范》.pdf

BS 1660-7-1988 Machine tapers - Specification for extension adaptors with external 7 24 tapers for tools with Morse taper shanks《机用圆锥 第7部分 莫氏锥柄刀具用7 24外锥度的加长适配器规范》.pdf

BS 1660-9-1988 Machine tapers - Specification for cotter slots《机用圆锥 第9部分 销槽规范》.pdf