CNS 4893-1982 Micrometer Heads《分厘头》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM A657 A657M-2003 Standard Specification for Tin Mill Products Black Plate Electrolytic Chromium-Coated Single and Double Reduced.pdf

ASTM A657 A657M-2003(2008)e1 Standard Specification for Tin Mill Products Black Plate Electrolytic Chromium-Coated Single and Double Reduced《一次和二次压延电解镀铬黑钢板轧制品技术规范》.pdf

ASTM A657 A657M-2013 Standard Specification for Tin Mill Products Black Plate Electrolytic Chromium-Coated Single and Double Reduced《单压延和双压延电解镀铬黑钢板轧制品标准规格》.pdf

ASTM A659 A659M-2006 Standard Specification for Commercial Steel (CS) Sheet and Strip Carbon (0 16 Maximum to 0 25 Maximum Percent) Hot-Rolled.pdf

ASTM A659 A659M-2008 Standard Specification for Commercial Steel (CS) Sheet and Strip Carbon (0 16 Maximum to 0 25 Maximum Percent) Hot-Rolled.pdf

ASTM A659 A659M-2010 Standard Specification for Commercial Steel (CS) Sheet and Strip Carbon (0 16 Maximum to 0 25 Maximum Percent) Hot-Rolled《碳素(最大含量为0 16%至0 25%)薄板材和带材热轧型钢(CS)用标准.pdf

ASTM A659 A659M-2012 Standard Specification for Commercial Steel (CS) Sheet and Strip Carbon (0 16 Maximum to 0 25 Maximum Percent) Hot-Rolled 《碳素(最大含量为0 16%至0 25%)薄板材和带材热轧型钢(CS)用标.pdf

ASTM A659 A659M-2012(2017) Standard Specification for Commercial Steel (CS) Sheet and Strip Carbon (0 16 Maximum to 0 25 Maximum Percent) Hot-Rolled《一般用(CS)热轧碳素(最高百分之0 16至百分之0 25)钢.pdf

ASTM A659 A659M-2018 Standard Specification for Commercial Steel (CS) Sheet and Strip Carbon (0 16 Maximum to 0 25 Maximum Percent) Hot-Rolled.pdf