CNS 4913-1986 Clear Lacquer《透明喷漆》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS ISO 888-2012 en_7866 Fasteners Bolts screws and studs Nominal lengths and thread lengths《紧固件.螺栓、螺钉和螺柱.公称长度及螺纹长度》.pdf

BS ISO 923-2000 en_5002 Coal cleaning equipment - Performance evaluation《煤净化设备.性能评定》.pdf

BS ISO 965-1-2013 en_9030 ISO general purpose metric screw threads Tolerances Principles and basic data《ISO通用米制螺纹 公差 原则和基本数据》.pdf

BS ISO 974-2000 en_7776 Plastics - Determination of the brittleness temperature by impact《塑料.用冲击法测定脆性温度》.pdf

BS ISO 975-2013 en_6125 Brown coals and lignites Determination of yield of benzene-soluble extract Semi-automatic method《褐炭和褐煤.甲苯可溶萃取物产率的测定.半自动法》.pdf

BS ISO 976-2013 en_9747 Rubber and plastics Polymer dispersions and rubber lattices Determination of pH《橡胶和塑料.聚合物的分散性和胶乳.pH值测定》.pdf

BS ISO 98-2001 en_6620 Textile machinery and accessories - Spinning preparatory and spinning machinery - Main dimensions of coverings for top rollers《纺织机械和附件.纺纱准备和纺纱机械.上卷轴的包纱性能》.pdf

BS ISO 5940-2-2007 en_8149 Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of the softening point (Mettler softening point method)《铝生产用碳.pdf

BS ISO 6020-3-2015 en_1078 Hydraulic fluid power Mounting dimensions for single rod cylinders 16 MPa (160 bar) series Compact series with bores from 250 mm to 500 mm《液压流体动力.16MPa(160bar)系.pdf