CNS 5021-1979 Welding Electrode Holder《焊条夹持器》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AGMA 04FTM10-2004 The Failure Investigation and Replacement of a Large Marine Gear《大型船用齿轮的故障调查和更换》.pdf

AGMA 04FTM11-2004 Gear Lubrication as a Reliability Partner《作为可靠性合作伙伴的齿轮传动装置润滑》.pdf

AGMA 04FTM12-2004 Improved Tooth Load Distribution in an Involute Spline Joint Using Lead Modifications Based on Finite Element Analysis《基于有限元素分析用铅修正的渐开线花键连接中改良的轮齿负载分配》.pdf

AGMA 04FTM13-2004 Superfinishing Motor Vehicle Ring and Pinion Gears《超级研磨汽车用环齿轮和小齿轮》.pdf

AGMA 04FTM2-2004 Noise Optimized Modifications Renaissance of the Generating Grinders 《噪声优化修正.滚铣法磨床的复兴》.pdf

AGMA 04FTM3-2004 A Method to Define Profile Modification of Spur Gear and Minimize the Transmission Error《正齿轮的规定外形修正方法和传输误差的最小化》.pdf

AGMA 04FTM4-2004 Influence of Surface Roughness on Gear Pitting Behavior《齿轮表面粗糙度对点蚀性能的影响》.pdf

AGMA 04FTM5-2004 Investigations on the Micropitting Load Capacity of Case Carburized Gears《壳式渗碳齿轮的微小蚀损负载能力的调查》.pdf

AGMA 04FTM6-2004 The Effect of a ZnDTP Anti--wear Additive on Micropitting Resistance of Carburised Steel Rollers《渗碳钢轧辊微小蚀损阻力的ZnDTP抗磨损添加剂的影响》.pdf