CNS 7942-1981 Method of Measuring Performance for Dust Collectors《集尘装置之性能测定法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM C1347-2008(2014)e1 Standard Practice for Preparation and Dissolution of Uranium Materials for Analysis《分析用铀材料制备和溶解的标准实施规程》.pdf

ASTM C1348-2001 Standard Specification for Blended Uranium Oxides with a 235U Content of Less Than 5 % for Direct Hydrogen Reduction to Nuclear Grade Uranium Dioxide《直接氢还原成核级二氧化铀用带.pdf

ASTM C1349-2004 Standard Specification for Architectural Flat Glass Clad Polycarbonate《建筑用聚碳酸酯镀层平板玻璃的标准规范》.pdf

ASTM C1349-2017 Standard Specification for Architectural Flat Glass Clad Polycarbonate《建筑用聚碳酸酯镀层平板玻璃的标准规格》.pdf

ASTM C135-1996(2003) Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion《用水浸法测定耐火材料的准确比重的标准试验方法》.pdf

ASTM C135-1996(2009)e1 Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion《用水浸法测定耐火材料的准确比重的标准试验方法》.pdf

ASTM C135-1996(2015) Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion《采用水浸法的耐火材料准确比重的标准试验方法》.pdf

ASTM C1350M-1996(2003) Standard Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range (Approximately 108 Pa&183 s to Approximately 10 13 Pa&.pdf

ASTM C1350M-1996(2008) Standard Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range (Approximately 108 Pa&183 s to Approximately 10 13 Pa&.pdf