DIN 15412-1-1983 Bottom blocks for lifting appliances cross pieces unmachined parts《起重机的底座 第1部分 横梁毛坯》.pdf

相关资源

DIN EN 818-7-2008 Short link chain for lifting purposes - Safety - Part 7 Fine tolerance hoist chain Grade T (Types T DAT and DT)(includes Amendment A1 2008) Ge.pdf

DIN EN 1677-3-2008 Components for slings - Safety - Part 3 Forged steel self-locking hooks Grade 8(includes Amendment A1 2008) English version of DIN EN 1677-3 .pdf

DIN EN 1677-2-2008 Components for slings - Safety - Part 2 Forged steel lifting hooks with latch Grade 8(includes Amendment A1 2008) English version of DIN EN 1.pdf

DIN EN 1670-2007 Building hardware - Corrosion resistance - Requirements and test methods English version of DIN EN 1670 2007-06《建筑五金器具 耐腐蚀 要求和试验方法》.pdf

DIN EN 1656-2010 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and.pdf

DIN EN 1230-2-2018 Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2 Off-flavour (taint) German version EN 1230-2 2009《用.pdf

DIN EN 1176-7-2008 Playground equipment and surfacing - Part 7 Guidance on installation inspection maintenance and operation English version of DIN EN 1176-7 20.pdf

DIN EN 1176-5-2008 Playground equipment and surfacing - Part 5 Additional specific safety requirements and test methods for carousels English version of DIN EN .pdf

DIN EN 1159-1-2007 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1 Determination of thermal expansion (includes Corrigendu.pdf

DIN EN 1093-4-2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4 Capture efficiency of an exhaust system - Tracer m.pdf

猜你喜欢

AGMA 05FTM06-2005 A Model to Predict Friction Losses of Hypoid Gears《准双曲面齿轮的预测摩擦损失模型》.pdf

AGMA 05FTM07-2005 Spiral Bevel and Hypoid Gear Cutting Technology Update《螺旋锥齿和准双曲面齿轮切削技术升级》.pdf

AGMA 05FTM08-2005 New Developments in Tooth Contact Analysis (TCA) and Loaded TCA for Spiral Bevel and Hypoid Gear Drives《齿面接触分析(TCA)新设计和螺旋锥齿及准双曲面齿轮驱动用加载的TCA》.pdf

AGMA 05FTM09-2005 Hypoid Gear Lapping Wear Coefficient and Simulation《准双曲面齿轮研磨磨损系数与仿真》.pdf

AGMA 05FTM10-2005 Finite Element Study of the Ikona Gear Tooth Profile《Ikona齿轮齿轮廓的有限元研究》.pdf

AGMA 05FTM11-2005 Low Loss Gears《低损耗齿轮》.pdf

AGMA 05FTM12-2005 Modal Failure Analysis of a Gear and Drive Ring Assembly《齿轮和驱动环组件的模式失效分析》.pdf

AGMA 05FTM13-2005 Evaluation of the Scuffing Resistance of Isotropic Superfinished Precision Gears《同向性超级压光精密齿轮的耐磨损性评估》.pdf

AGMA 05FTM14-2005 Determining the Shaper Cut Helical Gear Fillet Profile《整形切削斜齿轮倒角轮廓的测定》.pdf