1、September 2016 English price group 6No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.060.50!%ZT“2559649www.din.de
2、DIN EN 12210Windows and doors Resistance to wind load Classification;English version EN 12210:2016,English translation of DIN EN 12210:2016-09Fenster und Tren Widerstandsfhigkeit bei Windlast Klassifizierung;Englische Fassung EN 12210:2016,Englische bersetzung von DIN EN 12210:2016-09Fentres et port
3、es Rsistance au vent Classification;Version anglaise EN 12210:2016,Traduction anglaise de DIN EN 12210:2016-09SupersedesDIN EN 12210:2003-08www.beuth.deDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.Document comprises 8 pages 09.16
4、 DIN EN 12210:2016-092 A comma is used as the decimal marker. National foreword This document (EN 12210:2016) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling” (Secretariat: AFNOR, France). The responsible German body involved in its
5、 preparation was DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-09-01 AA Tren, Tore, Fenster, Abschlsse, Baubeschlge und Vorhangfassaden. Amendments This standard differs from DIN EN 12210:2003-08 as follows: a) Clause 4: Class 0 has b
6、een deleted; b) Subclause 6.1 has been added; c) Subclause 6.2: the whole paragraph has been revised: Guidance NB-CPD/SG06/11/079 from Group of Notified Bodies for the Construction Products Directive 89/106/EEC has been included. Previous editions DIN 18055-2: 1973-08 DIN 18055: 1981-10 DIN EN 12210
7、: 2000-06, 2003-08 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12210 March 2016 ICS 91.060.50 Supersedes EN 12210:1999English Version Windows and doors - Resistance to wind load - Classification Fentres et portes - Rsistance au vent - Classification Fenster und Tren - Widerstandsfhigkeit be
8、i Windlast - Klassifizierung This European Standard was approved by CEN on 9 January 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date l
9、ists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation und
10、er the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former
11、Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EURO
12、PEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12210:2016 EEN 12210:2016 (E) 2 Contents Page European forewo
13、rd . 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Classification . 4 5 Classification of relative frontal deflection . 5 6 Requirements . 5 6.1 General 5 6.2 Due to wind pressure P1 and P2 5 6.3 Due to wind pressure P3 5 7 Classification for resistance to wind load 5 DIN EN 122
14、10:2016-09 EN 12210:2016 (E) 3 European foreword This document (EN 12210:2016) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a nation
15、al standard, either by publication of an identical text or by endorsement, at the latest by September 2016, and conflicting national standards shall be withdrawn at the latest by September 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of pa
16、tent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12210:1999. The revision of this European Standard clarifies only the classification and does not affect existing evidence of EN 12210. This European Standard is o
17、ne of a series of standards for windows and doors. In comparison with EN 12210:1999, the following significant changes were made: a) Clause 4: Class 0 deleted; b) Sub-clause 6.1 inserted; c) Sub-clause 6.2: Revision of the whole paragraph: Guidance NB-CPD/SG06/11/079 from Group of Notified Bodies fo
18、r the Construction Products Directive 89/106/EEC included. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
19、Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 12210:2016-09 EN 1221
20、0:2016 (E) 4 1 Scope This European Standard defines the classification of test results for completely assembled windows and doors of any materials after testing in accordance with EN 12211. 2 Normative references The following documents, in whole or in part, are normatively referenced in this docume
21、nt and are indispensable for its application. For dated referenced, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1026, Windows and doors Air permeability Test method EN 12207, Windows and doors Air permea
22、bility Classification EN 12211, Windows and doors Resistance to wind load Test method EN 12519, Windows and pedestrian doors Terminology 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 12519 and EN 12211 apply. 4 Classification EN 12211 describes a me
23、thod of test to determine the limits (P1, P2 and P3) for the test specimen. These limits are expressed in Pascals (Pa). The relationships between the limits are: P2 = 0,5 P1; P3 = 1,5 P1. Classification shall be according to the results of wind resistance tests to positive and negative test pressure
24、s. Test pressures are given in Table 1. NOTE This classification can be used with other relevant standards or codes of practice and can thus be used to provide correlation with actual exposure requirements. Table 1 Classification of wind load Class P1 Pa P2aPa P3 Pa 1 400 200 600 2 800 400 1200 3 12
25、00 600 1800 4 1600 800 2400 5 2000 1000 3000 E xxxxbxxxx aThis pressure having been repeated 50 times. bTest specimen tested with wind loading above class 5, where xxxx is the actual test pressure P1 expressed in Pa (e.g. 2350). DIN EN 12210:2016-09 EN 12210:2016 (E) 5 5 Classification of relative f
26、rontal deflection The relative frontal deflection of the most deforming framing member of the test specimen measured at test pressure P1 shall be classified as in Table 2. Table 2 Classification of relative frontal deflection Class Relative frontal deflection A B C 1/150 1/200 1/300 6 Requirements 6
27、.1 General The following requirements shall also be met in order that the product can be classified. 6.2 Due to wind pressure P1 and P2 No visible failures (e.g. opening of the test specimen, loosening of the sash/casement or leaf, separation of hardware or glazing beads) when viewed by normal or co
28、rrected vision at a distance of 1 m in natural and/or artificial light. The test specimen shall remain functional and the air permeability after tests P1 and P2 shall not exceed the upper limits of the claimed air permeability class as specified in EN 12207 by more than 20 %. The claimed air permeab
29、ility class can be determined by means of the air permeability test preceding the wind load test. Before the resistance to wind load test according to EN 12211, the air permeability test according to EN 1026 shall be completed. The results of the air permeability test determine the initial classific
30、ation. When the air permeability is measured again after the wind loads P1 and P2 have been applied, the measured values for the repeated air permeability test shall not exceed the upper limits of the class for the air permeability claimed by the manufacturer by more than 20 % (following the previou
31、s classification rules used). However, if the upper limits of the class determined by the initial classification are exceeded by more than 20 %, the manufacturer may claim a lower air permeability class than that achieved in the initial classification. In these circumstances, the report shall state
32、that if the manufacturer wishes to claim a class for the air permeability for the product, combined with a class for resistance to wind load, only the air permeability class achieved in combination with the wind load test may be claimed. 6.3 Due to wind pressure P3 Failures such as bending and/or tw
33、isting of any building hardware and splitting or cracking of framing members shall be permitted provided that no parts become detached and the test specimen remains closed. However if glass breaks it is permitted for it to be replaced and the test to be repeated once more. If building hardware bends
34、, twists or breaks leading to a failure (e.g. opening of the test specimen, loosening of the sash/casement or leaf, separation of hardware or glazing beads), the defective part may be replaced, but the full test has to be repeated. 7 Classification for resistance to wind load Wind loads and relative
35、 frontal deflection shall be combined into one overall classification as indicated in Table 3. DIN EN 12210:2016-09 EN 12210:2016 (E) 6 Only the highest test deflection obtained from testing with positive and negative pressure at each pressure step requested by the manufacturer shall be used for ove
36、rall classification. Therefore it is not permissible to take an average of the different results obtained from testing with positive and negative pressure. Table 3 Resistance to wind load Classification Wind load class Relative frontal deflection A B C 1 A1 B1 C1 2 A2 B2 C2 3 A3 B3 C3 4 A4 B4 C4 5 A5 B5 C5 Exxxx AExxxx BExxxx CExxxx NOTE In the resistance to wind load classification, the letter refers to the relative frontal deflection, see Table 2, and the number to the wind load class, see Table 1. DIN EN 12210:2016-09
