1、February 2011 Translation by DIN-Sprachendienst.English price group 13No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).I
2、CS 91.220!$mr*“1747907www.din.deDDIN EN 12629-3Machines for the manufacture of constructional products from concreteand calcium-silicate Safety Part 3: Slide and turntable machines (includes Amendment A1:2010)English translation of DIN EN 12629-3:2011-02Maschinen fr die Herstellung von Bauprodukten
3、aus Beton und Kalksandsteinmassen Sicherheit Teil 3: Schiebetisch- und Drehtischmaschinen (enthlt nderung A1:2010)Englische bersetzung von DIN EN 12629-3:2011-02Machines pour la fabrication de produits de construction en bton et silico-calcaire Scurit Partie 3: Machines table coulissante et tournant
4、e (Amendement A1:2010 inclus)Traduction anglaise de DIN EN 12629-3:2011-02SupersedesDIN EN 12629-3:2003-06See start of applicationwww.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be considered authoritative.2502.11 DIN EN 12629-3:2011-02 2 Start of application
5、 The start of application of this standard is 1 February 2011. National foreword This standard includes safety requirements. This standard has been prepared by Technical Committee CEN/TC 151 “Construction equipment and building material machines Safety” (Secretariat: DIN, Germany). The responsible G
6、erman body involved in its preparation was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Working Committee NA 060-13-10 AA Betonsteinmaschinen of Section Bau- und Baustoffmaschinen. Representatives of manufacturers and users of concrete block making machines, and of
7、the employers liability insurance associations contributed to this standard. This standard contains specifications meeting the essential requirements set out in Annex I of the new “Machinery Directive”, Directive 2006/42/EC, and which apply to machines that are either first placed on the market or c
8、ommissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of the directive. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may ass
9、ume compliance with the requirements of the Machinery Directive (“presumption of conformity”). The European Standards referred to in Clause 2 and the Bibliography of this document have been published as the corresponding DIN EN or DIN EN ISO Standards with the same number. Amendments This standard d
10、iffers from DIN EN 12629-3:2003-06 as follows: a) the foreword has been modified; b) the introduction has been modified; c) Clause 1 “Scope” has been modified and updated; d) Clause 2 “Normative references” has been updated; e) Clause 3 “Terms and definitions” has been modified and updated; f) Claus
11、e 4 “List of significant hazards” has been updated; g) Clause 5 “Safety requirements and/or protective measures” has been updated; h) Clause 6 “Verification of safety requirements and/or protective measures” has been updated; i) Clause 7 “Information for use” has been modified and updated; j) Clause
12、 8 “Marking” has been updated; DIN EN 12629-3:2011-02 3 k) Annex E “Hazard zones and specific requirements for a common slide table machine” has been updated; l) Annex F “Hazard zones and specific requirements for a common turntable machine” has been updated; m) Annex G “Hazard zones and specific re
13、quirements for a hydraulic turntable machine manufacturing concrete products” has been updated; n) Annex H “Hazard zones and specific requirements for a hydraulic slide table machine manufacturing concrete products” has been updated; o) Annex ZA (informative) “Relationship between this European Stan
14、dard and the Essential Requirements of EU Directive 2006/42/EC” has been updated; p) the bibliography has been updated. Previous editions DIN EN 12629-3: 2003-06 DIN EN 12629-3:2011-02 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12629-3:2002+A1 September 2
15、010 ICS 91.220 Supersedes EN 12629-3:2002English Version Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines Machines pour la fabrication de produits de construction en bton et silico-calcaire - Scurit - Partie 3:
16、 Machines table coulissante et tournante Maschinen fr die Herstellung von Bauprodukten aus Beton und Kalksandsteinmassen - Sicherheit - Teil 3: Schiebetisch- und Drehtischmaschinen This European Standard was approved by CEN on 1 November 2002 and includes Amendment 1 approved by CEN on 5 August 2010
17、. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on
18、 application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Ce
19、ntre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, No
20、rway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any for
21、m and by any means reserved worldwide for CEN national Members. Ref. No. EN 12629-3:2002+A1:2010: EContents Foreword 3Introduction . 41 Scope 42 Normative references 53 Terms and definitions . 54 List of significant hazards 64.1 Mechanical hazards (see informative annexes E, F, G, H) 64.2 Electrical
22、 hazards 94.3 Hazards generated by vibration . 94.4 Hazards generated by materials and products . 94.5 Hazards generated by neglecting ergonomic principles . 94.6 Hazards caused by the failure of energy supply 95 !Safety requirements and/or protective measures“ . 96 !Verification of safety requireme
23、nts and/or protective measures“ 117 Information for use 118 Marking . 11Annex A (informative) Terminology for a common slide table machine . 12Annex B (informative) Terminology for a common turntable machine . 13Annex C (informative) Terminology for a common hydraulic turntable machine manufacturing
24、 concrete products 14Annex D (informative) Terminology for a common hydraulic slide table machine manufacturing concrete products 15Annex E (informative) Hazard zones and specific requirements for a common slide table machine 16Annex F (informative) Hazard zones and specific requirements for a commo
25、n turntable machine 17Annex G (informative) Hazard zones and specific requirements for a hydraulic turntable machine manufacturing concrete products . 18Annex H (informative) Hazard zones and specific requirements for a hydraulic slide table machine manufacturing concrete products . 19Annex ZA (info
26、rmative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ . 20Bibliography 21EN 12629-3:2002+A1:2010 (E) DIN EN 12629-3:2011-02 2 Page Foreword This document (EN 12629-3:2002+A1:2010) has been prepared by Technical Committee CEN /TC 151 “Constru
27、ction equipment and building material machines - Safety“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2011, and conflicting national standards sh
28、all be withdrawn at the latest by March 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, appr
29、oved by CEN on 2010-08-05. This document supersedes EN 12629-3:2002. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. !This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Ass
30、ociation, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.“ !The series “Machines for the manufacture of constructional products from concrete and calcium silicate Safety“ consists of
31、the following parts: Part 1: Common requirements Part 2: Block making machines Part 3: Slide and turntable machines Part 4: Concrete roof tile making machines Part 5.1: Pipe making machines manufacturing in the vertical axis Part 5.2: Pipe making machines manufacturing in the horizontal axis Part 5.
32、3: Pipe prestressing machines Part 5.4: Concrete pipe coating machines Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products Part 7: Stationary and mobile equipment for long line manufacture of prestressed products Part 8: Machines and equipment for the manufactu
33、re of constructional products from calcium silicate (and concrete)“ !deleted text“ According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Repu
34、blic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 12629-3:2002+A1:2010 (E) DIN EN 12629-3:2011-02 3 In
35、troduction !This European Standard is a Type C-standard as stated in EN ISO 12100. The machinery concerned and the extent to which hazards, hazardous situation and events are covered are indicated in the scope of this document. When provisions of this type C document are different from those, which
36、are stated in type A or B documents, the provisions of this type C document take precedence over the provisions of the other documents, for machines that have been designed and built according to the provisions of this type C document. This document specifies the additional requirements to and/or th
37、e deviations from EN 12629-1:2000+A1:2010 specific for the slide and turntable machines as described in 1.1. With the aim of clarifying the intentions of the document it should be noticed that the following assumptions were made when producing it: specific conditions of use or environmental conditio
38、ns out of the scope of the document shall be the subject of negotiations between the manufacturer and the user/owner, the equipment will only be used by competent and designated persons, the place of use/installation is adequately lit, all operations are carried out by specially trained operators.“
39、1 Scope 1.1 !This part of EN 12629, taken together with EN 12629-1:2000+A1:2010, applies to machines for the manufacture of constructional products of calcium-silicate or concrete, where the mould(s) is(are) mounted on a turning or slide table. The motive power for compressing the mixture is effecte
40、d either mechanically (Annexes A, B), or hydraulically (Annexes C and D). EN 12629-1:2000+A1:2010 specifies general requirements applicable to machines for the manufacture of constructional products from concrete and calciumsilicate. This document specifies the additional requirements to and/or the
41、deviations from EN 12629-1:2000+A1:2010 specific to the machines it covers.“ 1.2 !This European Standard deals with all significant hazards pertinent to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
42、This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.“ 1.3 This European Standard applies to the machines from the point at which the mixture enters the machine (see point 1 of annexes A, B, C, D) and the point where th
43、e pallets for concrete products are brought to the assembly (see point 8 at annexes C and D) until the point where the green products are removed from the machine to the curing system (see point 2 of annexes A, B, C, D). EN 12629-3:2002+A1:2010 (E) DIN EN 12629-3:2011-02 4 !deleted text“ ! 1.4 This
44、European Standard deals with the hazards listed in Clause 4 which can arise during the operation and maintenance, including the interfaces, of the slide and turntable machines, when carried out in accordance with the specifications given by the manufacturer or his authorised representative. This sta
45、ndard establishes safety requirements and/or methods of protection which apply to these machines.“ ! 1.5 This document is not applicable to side and turntable machines, which are manufactured before the date of publication of this document by CEN.“ 2 Normative references !The following referenced do
46、cuments are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12629-1:2000+A1:2010, Machines for the manufacture of constructional prod
47、ucts from concrete and calcium-silicate Safety Part 1: Common requirements EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for
48、design Part 2: Technical principles (ISO 12100-2:2003)“ 3 Terms and definitions !For the purposes of this document, the terms and definitions given in EN ISO 12100-1:2003, EN 12629-1:2000+A1:2010 and the following apply.“ For additional information, see also annexes A, B, C and D. 3.1 table movable
49、part of the machine in which the mould is fixed, recirculating mould machines (turntable) or forwards-backwards (slide table) 3.2 ram movable part of the machine which brings the compression force to the mixture in the mould 3.3 transmission levers those parts of the machine that convert rotary motive power into reciprocal movement through gears and cams 3.4 take off device integral part of the machine, that takes off the formed products (green) and
