1、March 2016 English price group 17No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.100.60!%N%U“2430250www.din.deDI
2、N EN 14304Thermal insulation products for building equipment and industrial installations Factory made flexible elastomeric foam (FEF) products Specification;English version EN 14304:2015,English translation of DIN EN 14304:2016-03Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechni
3、sche Anlagen in der Industrie Werkmig hergestellte Produkte aus flexiblem Elastomerschaum (FEF) Spezifikation;Englische Fassung EN 14304:2015,Englische bersetzung von DIN EN 14304:2016-03Produits isolants thermiques pour lquipement du btiment et les installations industrielles Produits manufacturs e
4、n mousse lastomre flexible (FEF) Spcification;Version anglaise EN 14304:2015,Traduction anglaise de DIN EN 14304:2016-03SupersedesDIN EN 14304:2013-04See start of applicationwww.beuth.deDocument comprises 41 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall
5、 be considered authoritative.03.16 DIN EN 14304:2016-03 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2016-03-01. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has
6、been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this standard should refer to the websites of the European Commission or of the relevant building authority. The standard wh
7、ich this document replaces, DIN EN 14304:2013-04, may be used in parallel with this standard during a specified transition period where such has been laid down in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 14304:
8、2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 00
9、5-56-69 AA Dmmstoffe fr betriebstechnische Anlagen in Gebuden und in der Industrie (SpA zu CEN/TC 88/WG 10). Amendments This standard differs from DIN EN 14304:2013-04 as follows: a) an addition has been made to the foreword; b) Clause 3 has been amended; c) a new Subclause 4.3.9 has been added; d)
10、5.3.2 has been amended; e) Clause 7 has been amended; f) Clause 8 has been amended; g) Annex A has been amended; h) a new version of Annex ZA has been added. Previous editions DIN EN 14304: 2010-03, 2013-04 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14304 December 2015 ICS 91.100.60 Supers
11、edes EN 14304:2009+A1:2013English Version Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification Produits isolants thermiques pour lquipement du btiment et les installations industrielles - Produits manu
12、facturs en mousse lastomre flexible (FEF) - Spcification Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische Anlagen in der Industrie - Werkmig hergestellte Produkte aus flexiblem Elastomerschaum (FEF) - Spezifikation This European Standard was approved by CEN on 24 October 201
13、5. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained o
14、n application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENE
15、LEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Ital
16、y, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenu
17、e Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14304:2015 EEN 14304:2015 (E) 2 Contents Page European foreword . 4 1 Scope 6 2 Normative references 6 3 Terms, definitions, symbols, units and abbre
18、viated terms . 8 3.1 Terms and definitions . 8 3.1.1 Terms and definitions as given in EN ISO 9229:2007 8 3.1.2 Additional terms and definitions 8 3.2 Symbols, units and abbreviated terms 9 3.2.1 Symbols and units used in this standard 9 3.2.2 Abbreviated terms used in this standard 10 4 Requirement
19、s 10 4.1 General . 10 4.2 For all applications 10 4.2.1 Thermal conductivity . 10 4.2.2 Dimensions and tolerances 11 4.2.3 Dimensional stability 12 4.2.4 Reaction to fire of the product as placed on the market 12 4.2.5 Durability characteristics . 12 4.3 For specific applications 13 4.3.1 General .
20、13 4.3.2 Maximum service temperature . 13 4.3.3 Minimum service temperature . 13 4.3.4 Water absorption . 14 4.3.5 Water vapour diffusion resistance 14 4.3.6 Trace quantities of water soluble ions and the pH-value 14 4.3.7 Structure-borne sound transmission . 14 4.3.8 Sound absorption . 14 4.3.9 Rel
21、ease of dangerous substances . 15 4.3.10 Continuous glowing combustion 15 5 Test methods . 15 5.1 Sampling 15 5.2 Conditioning . 15 5.3 Testing 15 5.3.1 General . 15 5.3.2 Thermal conductivity . 17 5.3.3 Reaction to fire 18 6 Designation code 18 7 Assessment and Verification of the Constancy of Perf
22、ormance (AVCP) . 19 7.1 General . 19 7.2 Product Type Determination (PTD) 19 7.3 Factory Production Control (FPC) 19 8 Marking and labelling . 19 Annex A (normative) Factory production control . 21 Annex B (normative) Determination of minimum service temperature 23 DIN EN 14304:2016-03 EN 14304:2015
23、 (E) 3 B.1 Definitions . 23 B.2 Principle . 23 B.3 Apparatus 23 B.4 Test specimens 23 B.5 Procedure 24 B.6 Calculation and expression of results . 24 B.7 Test report 25 Annex C (normative) Thermal conductivity measurement 26 Annex D (informative) Additional properties . 27 D.1 General . 27 D.2 Water
24、 vapour diffusion resistance . 27 D.3 Fire resistance of penetrations 27 D.4 Density 27 D.5 Compressive Strength . 28 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation . 29 ZA.1 Scope and relevant characteristics 29 ZA.2 Pro
25、cedures for AVCP of factory made flexible elastomeric foam (FEF) products . 31 ZA.3 CE Marking and labelling . 37 Bibliography . 39 DIN EN 14304:2016-03 EN 14304:2015 (E) 4 European foreword This document (EN 14304:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating material
26、s and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be withdrawn at the latest by Septembe
27、r 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14304:2009+A1:2013. This document is identifying t
28、hose clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). The main technical changes that have been made in this new edition of EN 14304 are the following: a) an addition to the foreword; b) an addition in Clause 3; c)
29、a new 4.3.9; d) modification of 5.3.2; e) modification of Clause 7; f) modification of Clause 8; g) modification of Annex A; h) a new Annex ZA. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requ
30、irements of Regulation (EU) No. 305/2011. For relationship with Regulation (EU) No. 305/2011, see informative Annex ZA, which is an integral part of this document. Locally responsible authorities and contracting entities, who are bound by EU Directives to specify their requirements using European ha
31、rmonized product standards, are allowed to demand additional properties outside the provisions of this standard if this is technically necessary because of prevailing operational conditions of the building equipment or the industrial installation projected or because of safety regulations. This Euro
32、pean Standard contains five annexes: Annex A (normative), Factory production control; Annex B (normative), Determination of minimum service temperature; Annex C (normative), Thermal conductivity measurement; DIN EN 14304:2016-03 EN 14304:2015 (E) 5 Annex D (informative), Additional properties; Annex
33、 ZA (informative), Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation. This document includes a bibliography. This European Standard is one of a series of standards for insulation products used in building equipment and industrial installations, bu
34、t this standard can be used in other areas, where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a European package of standards, setting (21 months after availability) as the date of withdrawal (dow) of national standards w
35、hich conflict with the European standards of this package. The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 14303, Thermal insulation products for b
36、uilding equipment and industrial installations Factory made mineral wool (MW) products Specification EN 14304, Thermal insulation products for building equipment and industrial installations Factory made flexible elastomeric foam (FEF) products Specification EN 14305, Thermal insulation products for
37、 building equipment and industrial installations Factory made cellular glass (CG) products Specification EN 14306, Thermal insulation products for building equipment and industrial installations Factory made calcium silicate (CS) products Specification EN 14307, Thermal insulation products for build
38、ing equipment and industrial installations Factory made extruded polystyrene foam (XPS) products Specification EN 14308, Thermal insulation products for building equipment and industrial installations Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products Specification E
39、N 14309, Thermal insulation products for building equipment and industrial installations Factory made products of expanded polystyrene (EPS) Specification EN 14313, Thermal insulation products for building equipment and industrial installations Factory made polyethylene foam (PEF) products Specifica
40、tion EN 14314, Thermal insulation products for building equipment and industrial installations Factory made phenolic foam (PF) products Specification EN 15501, Thermal insulation products for building equipment and industrial installations Factory made expanded perlite (EP) and exfoliated vermiculit
41、e (EV) products Specification According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Repu
42、blic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 14304:2016-03 EN 14304:2015 (E) 6 1 Scope This Eur
43、opean Standard specifies the requirements for factory made flexible elastomeric foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately - 200 C to + 175 C. Below an operating temperature of
44、 - 50 C, tests regarding the suitability of the products in the intended application should be performed. Manufacturers advice should be heeded in all cases. The products are manufactured in the form of sheets, tubes, rolls and tapes with or without coating and/or self-adhesive backing and/or differ
45、ent closure systems. This European Standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of sys
46、tems incorporating these products is not covered. This European Standard does not specify the required level of a given property that should be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulation
47、s and invitations to tender. Products with a declared thermal conductivity greater than 0,050 W/(mK) at 10 C are not covered by this standard. This European Standard does not cover products for the insulation of the building structure. The normative part of this European Standard does not cover comp
48、ressive stress (see D.5). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced doc
49、ument (including any amendments) applies. EN 822, Thermal insulating products for building applications - Determination of length and width EN 823, Thermal insulating products for building applications - Determination of thickness EN 824, Thermal insulating products for building applications - Determination of squareness EN 1604, Thermal insulating products for building applications - Determination of dimensi
