1、ICS 83.120Reinforced thermosetting moulding compoundsSpecification for Sheet Moulding Compound (SMC) andBulk Moulding Compound (BMC)Part 2: Methods of test and general requirementsEnglish version of DIN EN 14598-2Verstrkte hrtbare Formmassen Spezifikation fr Harzmatten (SMC) und faserverstrkte Press
2、matten(BMC) Teil 2: Prfverfahren und allgemeine AnforderungenNational forewordThis standard has been prepared by CEN/TC 249 Plastics (Secretariat: Belgium).The responsible German body involved in its preparation was the Normenausschuss Kunststoffe (PlasticsStandards Committee), Technical Committee F
3、NK-AA 203.1 Rieselfhige Duroplaste und langfaser-verstrkte Kunststoffe.The DIN Standards corresponding to the International Standards referred to in clause 2 of the EN are asfollows:IEC/ISO Standard DIN StandardIEC 60093 DIN IEC 60093IEC 60167 DIN IEC 60167ISO 2577 DIN 53464ISO 11667 DIN EN ISO 1166
4、7AmendmentsThis standard differs from DIN 16911, January 1978 edition, and DIN 16913-1, April 1981 edition, as follows:a) DIN 16911, January 1978 edition: The standard is published in three parts (designation, methods of test and general requirements,specific requirements). Moulding compounds type 8
5、02 and type 804 are no longer included (see DIN EN ISO 14530-1 toDIN EN ISO 14530-3). The range of moulding compounds included has been considerably extended. Type designations and symbols have been modified. Testing standards reflect current standardization and have been extended to suit changed re
6、quire-ments.b) DIN 16913-2, April 1981 edition: Testing standards reflect current standardization and have been extended to suit changed require-ments.DEUTSCHE NORM July 2005DIN EN 14598-2 No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e.V
7、., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).This standard, together withDIN EN 14598-1, July 2005 edition,DIN EN ISO 14530-1,DIN EN ISO 14530-2 andDIN EN ISO 14530-3, August 2000editions, supersedes DIN 16911,January 1978 edit
8、ion, andDIN 16913-2, April 1981 edition.Normenausschuss Bauwesen (NABau) im DINEnglish price group 11www.din.dewww.beuth.de11.05 9655259Continued overleaf.Document comprises 16 pages.Previous editionsDIN 16911: 1961-11, 1965x-01, 1968-10, 1970-06, 1978-01; DIN 16913: 1969-06; DIN 16913-2: 1981-04.Na
9、tional Annex NA(informative)BibliographyDIN 53464 Determination of shrinkage properties of mouldings from thermosetting mouldingmaterialsDIN EN ISO 11667 Fibre-reinforced plastics Moulding compounds and prepregs Determination of resin,reinforced-fibre and mineral-filler content Dissolution methods (
10、ISO 11667:1997)DIN IEC 60093 Methods of test for insulating materials for electrical purposes Volume resistivity andsurface resistivity of solid electrical insulating materials (IEC 60093:1980)DIN IEC 60167 Methods of test for insulating materials for electrical purposes Insulation resistance ofsoli
11、d materials (IEC 60167:1964)Page 2DIN EN 14598-2:2005-07English versionICS 83.120Management Centre: rue de Stassart, 36 B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungReinforced thermosetting moulding compoundsSpecification for Sheet
12、Moulding Compound (SMC)and Bulk Moulding Compound (BMC)Part 2: Methods of test and general requirements 2005. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN 14598-2:2005 EMlanges mouler thermodurcissa-bles renforcs Spcification pour
13、mats primprgns (SMC) etmlanges mouler en masse (BMC) Partie 2: Mthodes dessai et exi-gences gnralesVerstrkte hrtbare Formmassen Spezifikation fr Harzmatten (SMC)und faserverstrkte Pressmatten(BMC) Teil 2: Prfverfahren undallgemeine AnforderungenThis European Standard was approved by CEN on 2005-02-2
14、1.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on a
15、pplication to the Management Centre or to any CENmember.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe sam
16、e status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, theCzech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands,Norway, Poland, Portugal, Slovaki
17、a, Slovenia, Spain, Sweden, Switzerland, andthe United Kingdom.|April 2005EN 14598-2Page 2EN 14598-2:20052335555567714Page 3EN 14598-2:2005Page 4EN 14598-2:2005Page 5EN 14598-2:2005Page 6EN 14598-2:2005Page 7EN 14598-2:2005Page8EN14598-2:2005Page9EN14598-2:2005Page10EN14598-2:2005Page11EN14598-2:2005Page12EN14598-2:2005Page13EN14598-2:2005Page 14EN 14598-2:2005
