1、October 2013Translation by DIN-Sprachendienst.English price group 15No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS
2、 81.040.20!%)hE“2066934www.din.deDDIN EN 15682-2Glass in building Heat soaked thermally toughened alkaline earth silicate safety glass Part 2: Evaluation of conformity/Product standard;English version EN 15682-2:2013,English translation of DIN EN 15682-2:2013-10Glas im Bauwesen Heigelagertes thermis
3、ch vorgespanntes Erdalkali-Silicat-Einscheibensicherheitsglas Teil 2: Konformittsbewertung/Produktnorm;Englische Fassung EN 15682-2:2013,Englische bersetzung von DIN EN 15682-2:2013-10Verre dans la construction Verre de silicate alcalinoterreux de scurit tremp et trait Heat Soak Partie 2: Evaluation
4、 de la conformit/Norme de produit;Version anglaise EN 15682-2:2013,Traduction anglaise de DIN EN 15682-2:2013-10www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 37 pages10.13 DIN EN 15682-2:2013-10 2 A comma is used as the decimal marker
5、. Start of application It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For furthe
6、r information, users of this standard should refer to the websites of the European Commission or of the relevant building authority. National foreword This document (EN 15682-2:2013) has been prepared by Technical Committee CEN/TC 129 “Glass in building” (Secretariat: NBN, Belgium). The responsible
7、German body involved in its preparation was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Working Committee NA 005-09-29 AA Glas im Bauwesen (SpA zu CEN/TC 129 und ISO/TC 160). EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15682-2 July 2013 ICS 81.040.20 E
8、nglish Version Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard Verre dans la construction - Verre de silicate alcalinoterreuxde scurit tremp et trait Heat Soak - Partie 2: Evaluation de la conformit/Norme de
9、 produit Glas im Bauwesen - Heigelagertes thermisch vorgespanntes Erdalkali-Silicat-Einscheibensicherheitsglas - Teil 2: Konformittsbewertung/Produktnorm This European Standard was approved by CEN on 30 May 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipula
10、te the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Sta
11、ndard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the na
12、tional standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, S
13、lovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserve
14、d worldwide for CEN national Members. Ref. No. EN 15682-2:2013: EEN 15682-2:2013 (E) 2 Contents Page Foreword 4 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 Requirements .6 4.1 Product description .6 4.2 Conformity with the definition of heat soaked thermally toughened alkaline ea
15、rth silicate safety glass 7 4.3 Determination of the characteristics performances .7 4.3.1 Characteristics of heat soaked thermally toughened alkaline earth silicate safety glass .7 4.3.2 Determination of characteristics of heat soaked thermally toughened alkaline earth silicate safety glass product
16、s .8 4.4 Durability . 10 4.5 Dangerous substances 11 5 Evaluation of conformity 11 5.1 General . 11 5.2 Initial type testing of the product (see 5.1, b) . 11 5.2.1 General . 11 5.2.2 Initial type testing of heat soaked thermally toughened alkaline earth silicate safety glass . 12 5.2.3 Initial type
17、testing of characteristics performances 15 5.3 Factory production control and inspection of samples in accordance with a prescribed test plan (see 5.1, a) 1) 15 5.4 Initial inspection of factory and of factory production control (see 5.1, a) 2) . 15 5.5 Continuous surveillance and assessment of the
18、factory production control (see 5.1, a) 3) . 16 6 Marking and/or labelling 17 6.1 General . 17 6.2 Product marking . 17 6.3 Product characteristics 17 6.4 “Characteristics/performance identification paper” . 17 Annex A (normative) Factory production control . 18 A.1 Factory production control requir
19、ements 18 A.1.1 General . 18 A.1.2 Organisation 18 A.1.3 Control system 18 A.2 Marking 19 A.3 Inspection and testing tables of heat soaked thermally toughened alkaline earth silicate safety glass production . 19 A.3.1 Information on Table A.1 19 A.3.2 Production control 20 A.3.3 Product control . 20
20、 A.3.4 Use of proxy testing . 20 Annex B (normative) Tests for factory production control . 24 B.1 Strength measurement . 24 B.1.1 Four point bending strength test 24 B.1.2 Optical surface pre-stress measurement . 24 B.2 Fragmentation test 25 B.2.1 Requirements 25 DIN EN 15682-2:2013-10EN 15682-2:20
21、13 (E) 3 B.2.2 Test method . 25 Annex C (informative) Provisions for voluntary involvement of third party(ies) . 26 C.1 General . 26 C.2 Voluntary tasks for third parties 26 C.3 Marking and labelling 26 Annex ZA (informative) Clauses of this European Standard addressing the provisions of EU Construc
22、tion Products Directive . 27 ZA.1 Scope and relevant characteristics . 27 ZA.2 Procedure(s) for the attestation of conformity of heat soaked thermally toughened alkaline earth silicate safety glass products 29 ZA.2.1 System(s) of attestation of conformity 29 ZA.2.2 EC Certificate and Declaration of
23、Conformity 31 ZA.3 CE marking and labelling . 32 Bibliography 35 DIN EN 15682-2:2013-10EN 15682-2:2013 (E) 4 Foreword This document (EN 15682-2:2013) has been prepared by Technical Committee CEN/TC 129 “Glass in Building”, the secretariat of which is held by IBN. This European Standard shall be give
24、n the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2014, and conflicting national standards shall be withdrawn at the latest by January 2014. Attention is drawn to the possibility that some of the elements of this document may
25、be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU
26、Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. EN 15682 is composed of the following parts: EN 15682-1, Glass in building Heat soaked thermally toughened alkaline earth silicate safety glass Part 1: Definition and descriptio
27、n EN 15682-2, Glass in building Heat soaked thermally toughened alkaline earth silicate safety glass Part 2: Evaluation of conformity/Product standard According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this Europe
28、an Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slove
29、nia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 15682-2:2013-10EN 15682-2:2013 (E) 5 1 Scope This European Standard specifies requirements, the evaluation of conformity and the factory production control of flat heat soaked thermally toughened alkaline earth silicate safety gl
30、ass for use in buildings. For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are in
31、dispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 356, Glass in building Security glazing Testing and classification of resistance against manual attack E
32、N 410, Glass in building Determination of luminous and solar characteristics of glazing EN 673, Glass in building Determination of thermal transmittance (U value) Calculation method EN 1063, Glass in building Security glazing Testing and classification of resistance against bullet attack EN 1096-1,
33、Glass in building Coated glass Part 1: Definitions and classification EN 1096-2, Glass in building Coated glass Part 2: Requirements and test methods for class A, B and S coatings EN 1096-3, Glass in building Coated glass Part 3: Requirements and test methods for class C and D coatings EN 1288-3, Gl
34、ass in building Determination of the bending strength of glass Part 3: Test with specimen supported at two points (four point bending) EN 12600, Glass in building Pendulum test Impact test method and classification for flat glass EN 12758, Glass in building Glazing and airborne sound insulation Prod
35、uct descriptions and determination of properties EN 12898, Glass in building Determination of the emissivity EN 13501-1, Fire classification of construction products and building elements Part 1: Classification using data from reaction to fire tests EN 13501-2, Fire classification of construction pr
36、oducts and building elements Part 2: Classification using data from fire resistance tests, excluding ventilation services EN 13501-5, Fire classification of construction products and building elements Part 5: Classification using data from external fire exposure to roof tests EN 13541, Glass in buil
37、ding Security glazing Testing and classification of resistance against explosion pressure EN 14178-1, Glass in building Basic alkaline earth silicate glass products Part 1: Float glass DIN EN 15682-2:2013-10EN 15682-2:2013 (E) 6 EN 15682-1:2013, Glass in building Heat soaked thermally toughened alka
38、line earth silicate safety glass Part 1: Definition and description 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 15682-1:2013 and the following apply. 3.1 initial type testing determination of the performance of a product (characteristic, durabilit
39、y), on the basis of either actual tests or other procedures (such as conventional, standardised, tabulated or general accepted values, standardised or recognised calculation methods, test reports when made available, ), in accordance with this document that demonstrates compliance with this document
40、 3.2 test report document that covers the results of tests undertaken on a representative sample of the product from production or on a prototype design of the product 3.3 product description document that details the relevant parameters, e.g. process conditions, structure, etc., for defining a prod
41、uct that complies with the standard and which includes specific reference(s) to characteristics that are modified by the production process 3.4 significant change variation in performance beyond the permitted tolerance for the characteristic 4 Requirements 4.1 Product description For conformity purp
42、oses the heat soaked thermally toughened alkaline earth silicate glass manufacturer is responsible for the preparation and maintenance of the product description. This description shall describe the product and/or product families. Disclosure of the product description shall be at the discretion of
43、the heat soaked thermally toughened alkaline earth silicate glass manufacturer or his agent except in the case of regulatory requirements. The description shall contain at least a normative part. The description may also contain an informative part, when the manufacturer foresees further development
44、 of the product. The normative part of the description shall contain the following minimum information: a reference to EN 15682-1 and EN 15682-2 and all other standards with which the manufacturer claims compliance; the spectrophotometric properties and durability of coated glass, i.e. coated glass
45、that conforms with EN 1096-1, EN 1096-2, EN 1096-3, when those properties are changed, intentionally or unintentionally, by the thermal toughening and heat soaking process. The definition of product families shall be consistent with the normative part of the product description. DIN EN 15682-2:2013-
46、10EN 15682-2:2013 (E) 7 The substitution of materials shall maintain the conformity with the product description. The substituting material can be added to the product family and also the product description when compliance has been demonstrated. 4.2 Conformity with the definition of heat soaked the
47、rmally toughened alkaline earth silicate safety glass Products shall conform to the definition and fulfil the requirements of heat soaked thermally toughened alkaline earth silicate safety glass as defined in EN 15682-1. 4.3 Determination of the characteristics performances 4.3.1 Characteristics of
48、heat soaked thermally toughened alkaline earth silicate safety glass 4.3.1.1 General The characteristics of heat soaked thermally toughened alkaline earth silicate safety glass are in general those of the glass substrate (see 4.3.1.2). 4.3.1.2 Characteristics of the alkaline earth silicate glass pan
49、es used for the production of heat soaked thermally toughened alkaline earth silicate safety glass Panes shall be made of alkaline earth silicate glass according to EN 14178-1. The panes can be coated according to EN 1096-1, EN 1096-2, EN 1096-3 and/or enamelled according to EN 15682-1. For the characteristics listed in Table 1, for the alkaline earth silicate glass panes, generally accepted values or
