1、March 2014 Translation by DIN-Sprachendienst.English price group 19No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS
2、79.120.10!%,(“2099305www.din.deDDIN EN 1870-12Safety of woodworking machines Circular sawing machines Part 12: Pendulum cross-cut sawing machines;English version EN 1870-12:2013,English translation of DIN EN 1870-12:2014-03Sicherheit von Holzbearbeitungsmaschinen Kreissgemaschinen Teil 12: Pendelkre
3、issgemaschinen;Englische Fassung EN 1870-12:2013,Englische bersetzung von DIN EN 1870-12:2014-03Scurit des machines pour le travail du bois Machines scies circulaires Partie 12: Trononneuses pendulaires;Version anglaise EN 1870-12:2013,Traduction anglaise de DIN EN 1870-12:2014-03SupersedesDIN EN 18
4、70-12:2010-07www.beuth.deDocument comprises 49 pagesIn case of doubt, the German-language original shall be considered authoritative.02.14 DIN EN 1870-12:2014-03 2 A comma is used as the decimal marker. National foreword This standard includes safety requirements. This document (EN 1870-12:2013) has
5、 been prepared by Technical Committee CEN/TC 142 “Woodworking machines Safety” (Secretariat: UNI, Italy). The responsible German body involved in its preparation was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Working Committee NA 060-06-01 AA Holzbearbeitungs-masc
6、hinen Sicherheit of Section Holzbearbeitungsmaschinen. Representatives of manufacturers and users of pendulum cross-cut sawing machines, and of the employers liability insurance associations contributed to this standard. This standard contains specifications meeting the essential requirements set ou
7、t in Annex I of the “Machinery Directive”, Directive 2006/42/EC, and which apply to machines that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of that directive. Once this standard is cite
8、d in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). The European Standards referred to in Clause 2 and in the Biblio
9、graphy of the EN have been published as the corresponding DIN EN or DIN EN ISO Standards with the same number. Where the International Standards referred to are not also DIN ISO Standards with the same number, there are no national standards available, except for: HD 22.1 S4 DIN EN 50525-1 (VDE 0285
10、-525-1) HD 22.4 S4 DIN EN 50525-2-21 (VDE 0285-525-2-21) Amendments This standard differs from DIN EN 1870-12:2010-07 as follows: a) automatic and displaceable machines have been deleted from Clause 1 “Scope”; b) Clause 2 “Normative references” has been updated; c) in Clause 3 “Terms and definitions
11、”, the definitions of pendulum cross-cut sawing machines have been modified and the definition of automatic pendulum cross-cut sawing machines has been deleted; d) in Clause 5 “Safety requirements and/or measures”, requirements for the functional safety of the control system of the machine, for the
12、braking system and for the protection against mechanical hazards have been revised; e) in Subclause 6.4 “Instruction handbook”, further requirements have been included; f) Annex A (normative) “Impact test method for guards” has been added; g) Annex B (normative) “Braking tests” has been added. Previ
13、ous editions DIN EN 1870-12: 2004-03, 2010-07 DIN EN 1870-12:2014-03 3 National Annex NA (informative) Bibliography DIN EN 50525-1 (VDE 0285-525-1), Electric cables Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 1: General requirements DIN EN 50525-2-21 (VDE 02
14、85-525-2-21), Electric cables Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 2-21: Cables for general applications Flexible cables with crosslinked elastomeric insulation DIN EN 1870-12:2014-03 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENN
15、E EUROPISCHE NORM EN 1870-12 October 2013 ICS 79.120.10 Supersedes EN 1870-12:2003+A1:2009 English Version Safety of woodworking machines Circular sawing machines Part 12: Pendulum cross-cut sawing machines Scurit des machines pour le travail du bois Machines scies circulaires Partie 12: Trononneuse
16、s pendulaires Sicherheit von Holzbearbeitungsmaschinen Kreissgemaschinen Teil 12: Pendelkreissgemaschinen This European Standard was approved by CEN on 21 September 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
17、 Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (E
18、nglish, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgiu
19、m, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerl
20、and, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national M
21、embers. Ref. No. EN 1870-12:2013: E 2 ContentsPage Foreword 4 Introduction .6 1 Scope 7 2 Normative references 7 3 Terms and definitions .9 4 List of significant hazards . 11 5 Safety requirements and/or measures . 14 5.1 General . 14 5.2 Controls . 14 5.2.1 General . 14 5.2.2 Position of controls 1
22、5 5.2.3 Starting 17 5.2.4 Normal stopping . 18 5.2.5 Emergency stop 19 5.2.6 Workpiece positioning . 19 5.2.7 Mode selection 19 5.2.8 Failure of the power supply . 20 5.2.9 Failure of the control circuits 20 5.3 Protection against mechanical hazards . 20 5.3.1 Stability 20 5.3.2 Risk of break up dur
23、ing operation 21 5.3.3 Saw blade fixing and spindle design 21 5.3.4 Braking . 22 5.3.5 Measures to minimise the possibility or effect of ejection 23 5.3.6 Workpiece supports and guides . 23 5.3.7 Prevention of access to moving parts 25 5.3.8 Clamping devices . 29 5.4 Protection against non-mechanica
24、l hazards . 29 5.4.1 Fire . 29 5.4.2 Noise 30 5.4.3 Emission of chips and dust . 31 5.4.4 Electricity . 31 5.4.5 Ergonomics and handling 32 5.4.6 Pneumatics 32 5.4.7 Hydraulics 33 5.4.8 Electromagnetic compatibility . 33 5.4.9 Laser 33 5.4.10 Static electricity 33 5.4.11 Errors of Fitting . 33 5.4.1
25、2 Supply disconnection (Isolation) 33 5.4.13 Maintenance 34 6 Information for use . 34 6.1 General . 34 6.2 Warning devices . 34 6.3 Marking 35 6.4 Instruction handbook . 35 Annex A (normative) Impact test method for guards . 39 A.1 General . 39 DIN EN 1870-12:2014-03 EN 1870-12:2013 (E) 3 A.2 Test
26、method . 39 A.2.1 Preliminary remarks 39 A.2.2 Testing equipment . 39 A.2.3 Projectile for guards 39 A.2.4 Sampling. 39 A.2.5 Test procedure . 40 A.3 Results 40 A.4 Assessment . 40 A.5 Test report 40 A.6 Test equipment for impact test 40 Annex B (normative) Braking tests . 42 B.1 Conditions for all
27、tests 42 B.2 Tests . 42 B.2.1 Run-up time 42 B.2.2 Un-braked run-down time . 42 B.2.3 Braked run-down time . 42 Annex C (normative) Dimensional tolerances of saw spindles . 43 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC
28、 44 Bibliography 45 PageDIN EN 1870-12:2014-03 EN 1870-12:2013 (E) 4 Foreword This document (EN 1870-12:2013) has been prepared by Technical Committee CEN/TC 142 “Woodworking machines - Safety”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national s
29、tandard, either by publication of an identical text or by endorsement, at the latest by April 2014 and conflicting national standards shall be withdrawn at the latest by April 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.
30、CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1870-12:2003+A1:2009. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential re
31、quirements of the Machinery Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document. EN 1870 Safety of woodworking machines Circular sawing machines consists of the following parts: Part 1: Circular saw benches (with and without sliding tab
32、le), dimension saws and building site saws Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches Part 4: Multi blade rip sawing machines with manual loading and/or unloading Part 5: Circular saw benches/up-cutting cross-cut sawing machines Part 6: Circ
33、ular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading Part 8: Single blade edging circular rip sawing
34、machines with power driven saw unit and manual loading and/or unloading Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines Part 11: Semi-
35、automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) Part 12: Pendulum cross-cut sawing machines Part 13: Horizontal beam panel sawing machines Part 14: Vertical panel sawing machines Part 15: Multi blade cross-cut sawing machines with integrated feed of the workpiece a
36、nd manual loading and/or unloading Part 16: Double mitre sawing machines for V-cutting DIN EN 1870-12:2014-03 EN 1870-12:2013 (E) 5 Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws) Part 18: Dimension saws Part 19: Circular saw benches (with and
37、without sliding table) and building site saws The following technical modifications have been introduced during the revision: deletion of automatic machines; deletion of displaceable machines; introduction of PL; more precise requirements for access for saw blade change; more precise requirements fo
38、r braking; addition of provisions to prevent saw unit accelerating or lifting-up during cutting. Organisations contributing to the preparation of this European Standard include European Committee of Woodworking Machinery Manufacturers Association EUMABOIS . The European Standards produced by CEN/TC
39、142 are particular to woodworking machines and complement the relevant A and B Standards on the subject of general safety (see introduction of EN ISO 12100:2010 for a description of A, B and C standards). According to the CEN/CENELEC Internal Regulations, the national standards organisations of the
40、following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlan
41、ds, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 1870-12:2014-03 EN 1870-12:2013 (E) “ ”6 Introduction This document has been prepared to be a harmonised standard to provide one means of conforming to the essential safety re
42、quirements of the Machinery Directive, and associated EFTA regulations. This document is a type C standard as defined in EN ISO 12100:2010. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document. When provision
43、s of this type C standard are different from those which are stated in type A or B standards, the provisions of this C type standard take precedence over the provisions of other standards, for machines that have been designed and built according to the provisions of this type C standard. The require
44、ments of this document are directed to manufacturers and their authorised representatives of pendulum cross-cut sawing machines. It is also useful for designers. This document also includes information which can be provided by the manufacturer to the user. Common requirements for tooling are given i
45、n EN 847-1:2005+A1:2007. DIN EN 1870-12:2014-03 EN 1870-12:2013 (E) “ ”7 1 Scope This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to pendulum cross-cut sawing, herein after referred to as machines, designed to cut sol
46、id wood, chipboard, fibreboard, plywood and also these materials when covered with plastic edging and/or plastic/light alloy laminates when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. This European Standard does not apply t
47、o: a) machines for cross cutting logs; b) machines where the saw unit can be rotated about a horizontal axis. NOTE The requirements of this European Standard apply to all machines whatever their method of control e.g. electromechanical and/or electronic. This European Standard is primarily directed
48、at machines which are manufactured after the date of its publication as EN. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 574:1996+A1:2008, Safety of machinery Two-hand control devices Functional aspects Principles
