1、February 2015 Translation by DIN-Sprachendienst.English price group 23No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).I
2、CS 79.120.10!%;$“2292401www.din.deDDIN EN 1870-3Safety of woodworking machines Circular sawing machines Part 3: Down cutting cross-cut saws and dual purpose down cuttingcross-cut saws/circular saw benches;English version EN 1870-3:2014,English translation of DIN EN 1870-3:2015-02Sicherheit von Holzb
3、earbeitungsmaschinen Kreissgemaschinen Teil 3: Von oben schneidende Kappsgemaschinen und kombinierte Kapp- undTischkreissgemaschinen;Englische Fassung EN 1870-3:2014,Englische bersetzung von DIN EN 1870-3:2015-02Scurit des machines pour le travail du bois Machines scies circulaires Partie 3: Trononn
4、euses coupe descendante et trononneuses mixtes coupedescendante et scies circulaires table de menuisier;Version anglaise EN 1870-3:2014,Traduction anglaise de DIN EN 1870-3:2015-02SupersedesDIN EN 1870-3:2009-08www.beuth.deIn case of doubt, the German-language original shall be considered authoritat
5、ive.Document comprises 66 pages 01.15 DIN EN 1870-3:2015-02 2 A comma is used as the decimal marker. National foreword This standard includes safety requirements. This document (EN 1870-3:2014) has been prepared by Technical Committee CEN/TC 142 “Woodworking machines Safety” (Secretariat: UNI, Italy
6、). The responsible German body involved in its preparation was the DIN-Normenausschuss Maschinenbau (DIN Standards Committee Mechanical Engineering), Working Committee NA 060-06-01 AA Holzbearbeitungs-maschinen Sicherheit of Section Holzbearbeitungsmaschinen. Representatives of manufacturers and use
7、rs of down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches, and of the employers liability insurance associations contributed to this standard. This standard contains specifications meeting the essential requirements set out in Annex I of the “Machinery Direc
8、tive”, Directive 2006/42/EC, and which apply to machines that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential require-ments of that directive. Once this standard is cited in the Official Journal of the Eu
9、ropean Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). The European Standards referred to in Clause 2 and in the Bibliography of the EN have been publishe
10、d as the corresponding DIN EN or DIN EN ISO Standards with the same number. For the International Standards referred to there are no national standards available. Amendments This standard differs from DIN EN 1870-3:2009-08 as follows: a) Clause 2 “Normative references” has been updated; b) in Subcla
11、use 5.2 “Controls”, the design requirements for control circuits in certain categories have been replaced by specifications for performance levels; c) Subclause 5.2.1.2 “Use of protective devices” has been added; d) in Subclause 5.3.2 “Risk of break-up during operation”, the requirement has been add
12、ed to perform for plastic material (except for polycarbonate) used for guards an impact test; e) in Subclause 5.3.4 “Braking”, requirements for the braking system have been modified and the braking test has been moved to Annex D; f) Subclause 5.4.3 “Emission of chips and dust” has been revised to in
13、clude further requirements; g) Annex E “Impact test method for guards” has been added; h) Annex ZA (informative) “Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC” has been deleted; DIN EN 1870-3:2015-02 3 i) the former Annex ZB is now Annex ZA (inf
14、ormative) “Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC”; j) the Bibliography has been updated. Previous editions DIN EN 1870-3: 2002-02, 2009-08 DIN EN 1870-3:2015-02 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPI
15、SCHE NORM EN 1870-3 November 2014 ICS 79.120.10 Supersedes EN 1870-3:2001+A1:2009English Version Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches Scurit des machines pour le travail du bo
16、is - Machines scies circulaires - Partie 3: Trononneuses coupe descendante et trononneuses mixtes coupe descendante et scies circulaires table de menuisier Sicherheit von Holzbearbeitungsmaschinen - Kreissgemaschinen - Teil 3: Von oben schneidende Kappsgemaschinen und kombinierte Kapp- und Tischkrei
17、ssgemaschinen This European Standard was approved by CEN on 11 October 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibli
18、ographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respons
19、ibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Repub
20、lic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMAL
21、ISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1870-3:2014 EEN 1870-3:2014 (E)2 Contents Page Foreword 4 Introduction .6
22、1 Scope 7 2 Normative references 7 3 Terms and definitions 10 3.1 General . 10 3.2 Terms and definitions 10 4 List of significant hazards . 14 5 Safety requirements and/or measures . 17 5.1 General . 17 5.2 Controls . 17 5.2.1 Safety and reliability of control systems 17 5.2.2 Position of controls 1
23、8 5.2.3 Starting 19 5.2.4 Normal stopping . 20 5.2.5 Emergency stop 21 5.2.6 Integrated feed 21 5.2.7 Mode selection 21 5.2.8 Failure of the power supply . 22 5.3 Protection against mechanical hazards . 22 5.3.1 Stability 22 5.3.2 Risk of break-up during operation 22 5.3.3 Tool holder and tool desig
24、n . 23 5.3.4 Braking . 24 5.3.5 Devices to minimize the possibility or the effect of ejection . 25 5.3.6 Workpiece supports and guides . 30 5.3.7 Prevention of access to moving parts 36 5.3.8 Clamping devices . 41 5.3.9 Safety appliances 42 5.4 Protection against non-mechanical hazards . 42 5.4.1 Fi
25、re . 42 5.4.2 Noise 42 5.4.3 Emission of chips and dust . 43 5.4.4 Electricity . 44 5.4.5 Ergonomics and handling 45 5.4.6 Lighting 45 5.4.7 Pneumatics 46 5.4.8 Substances 46 5.4.9 Electromagnetic compatibility . 46 5.4.10 Laser 46 5.4.11 Errors of fitting 46 5.4.12 Isolation . 46 5.4.13 Maintenance
26、 47 6 Information for use . 47 6.1 General . 47 6.2 Marking 47 6.2.1 Riving knife marking 47 6.2.2 Machine marking. 48 DIN EN 1870-3:2015-02 6.3 Instruction handbook 48 EN 1870-3:2014 (E) 3 Annex A (normative) Dimensional tolerances of saw spindles 52 Annex B (normative) Riving knife mounting streng
27、th test . 53 Annex C (normative) Riving knife lateral stability test 54 Annex D (normative) Braking tests . 55 D.1 Conditions for all tests 55 D.2 Tests . 55 D.2.1 Un-braked run-down time . 55 D.2.2 Braked run-down time . 55 Annex E (normative) Impact test method for guards 56 E.1 General . 56 E.2 T
28、est method . 56 E.2.1 Preliminary remarks 56 E.2.2 Testing equipment . 56 E.2.3 Projectile for guards 56 E.2.4 Sampling. 56 E.2.5 Test procedure . 56 E.3 Results 56 E.4 Assessment . 57 E.5 Test report 57 E.6 Test equipment for impact test 57 Annex ZA (informative) Relationship between this European
29、Standard and the Essential Requirements of EU Directive 2006/42/EC 59 Bibliography 62 DINEN 1870-3:2015-02EN 1870-3:2014 (E) 4 Foreword This document (EN 1870-3:2014) has been prepared by Technical Committee CEN/TC 142 “Woodworking machines - Safety”, the secretariat of which is held by UNI. This Eu
30、ropean Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2015, and conflicting national standards shall be withdrawn at the latest by May 2015. Attention is drawn to the possibility that some of the elements
31、of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essentia
32、l requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. The main modifications compared to EN 1870-3:2001+A1:2009 relate to the introduction of performance levels (PL) for control systems and to the following ite
33、ms: clarification of controls positions in 5.2.2; addition of PL where missing; addition of requirements on mode selection in 5.2.7 and on prevention of automatic restart in 5.2.8; deletion of material requirements on flanges in 5.3.3.3; addition of requirements on braking system in 5.3.4; up-date o
34、f references; addition of requirements in 5.4.3 on chips and dust performances; limitation of tightening torque for riving knife mounting screws in Annex B. Organisations contributing to the preparation of this European Standard include the European Committee of Woodworking Machinery Manufacturers A
35、ssociation “EUMABOIS”. EN 1870, Safety of woodworking machines Circular sawing machines, consists of the following parts: Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches; Part 4: Multi-blade rip sawing machines with manual loading and/or unloadin
36、g; Part 5: Circular saw benches/up-cutting cross-cut sawing machines; Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading; Part 7: Single blade log sawing machines with integrated feed table a
37、nd manual loading and/or unloading; Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading; DINEN 1870-3:2015-02EN 1870-3:2014 (E) 5 Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual l
38、oading and/or unloading; Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines; Part 11: Semi-automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws); Part 12: Pendulum cross-cut sawing machines; Part 13: Horizontal beam panel sawing machi
39、nes; Part 14: Vertical panel sawing machines; Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading; Part 16: Double mitre sawing machines for V-cutting; Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit
40、(manual radial arm saws); Part 18: Dimension saws; Part 19: Circular saw benches (with and without sliding table) and building site saws. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard:
41、Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, S
42、weden, Switzerland, Turkey and the United Kingdom. DINEN 1870-3:2015-02EN 1870-3:2014 (E) 6 Introduction This document has been prepared to be a harmonized standard to provide one means of conforming to the essential safety requirements of the Machinery Directive, and associated EFTA regulations. Th
43、is European Standard is a type “C” standard as defined in EN ISO 12100:2010. The extent to which hazards are covered is indicated in the scope of this document. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C s
44、tandard take precedence over the provisions of other standards, for machines that have been designed and built according to the provisions of this type C standard. The requirements of this document are directed to manufacturers and their authorized representatives of down cutting cross-cut saws and
45、dual purpose down cutting cross -cut saws/circular saw benches. They are also useful for designers. This document also includes information to be provided by the manufacturer to the user. Common requirements for tooling are given in EN 847-1:2013. Electrically driven machines excluded by the scope o
46、f this document are covered by the requirements of EN 61029-1:2000, EN 61029-2-9:2009 and EN 61029-2-11:2009. DINEN 1870-3:2015-02EN 1870-3:2014 (E)7 1 Scope This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to down cu
47、tting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches, herein after referred to as “machines”, designed to cut solid wood, chipboard, fibreboard, plywood and also these materials where they are covered with plastic edging and/or plastic/light alloy laminates when the
48、y are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. NOTE 1 For the definition of down cutting cross-cut saws and dual purpose down cutting cross -cut saws/circular saw benches, see 3.2.2, 3.2.3 and 3.2.4, and for the definition of displaceable machine, see 3.2.8. This document does not apply to: machines for cross cutting logs; hand-held motor-operated electric tools or any adaptation permitt
