1、November 2010 Translation by DIN-Sprachendienst.English price group 6No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC
2、S 13.340.70!$l1n“1731475www.din.deDDIN EN ISO 12402-5/A1Personal flotation devices Part 5: Buoyancy aids (level 50) Safety requirements Amendment 1 (ISO 12402-5:2006/Amd 1:2010)English translation of DIN EN ISO 12402-5/A1:2010-11Persnliche Auftriebsmittel Teil 5: Schwimmhilfen (Stufe 50) Sicherheits
3、technische Anforderungen nderung 1 (ISO 12402-5:2006/Amd 1:2010)Englische bersetzung von DIN EN ISO 12402-5/A1:2010-11quipements individuels de flottabilit Partie 5: Aides la flottabilit (niveau 50) Exigences de scurit Amendement 1 (ISO 12402-5:2006/Amd 1:2010)Traduction anglaise de DIN EN ISO 12402
4、-5/A1:2010-11ModifiesDIN EN ISO 12402-5:2006-12www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 8 pages 11.10 DIN EN ISO 12402-5/A1:2010-11 2 National foreword This standard has been prepared by Technical Committee ISO/TC 188 “Small craf
5、t” (Secretariat: SIS, Sweden) in collaboration with Technical Committee CEN/TC 162 “Protective clothing including hand and arm protection and lifejackets” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the Normenausschuss Sport- und Freizeitgert (Sports Equi
6、pment Standards Committee), Working Committee NA 112-04-04 AA Wasserrettungs- und Sicherheitsmittel. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 12402-5:2006/A1 June 2010 ICS 13.340.70 English Version Personal flotation devices - Part 5: Buoyancy aids (level 50) - Safety requirements -
7、Amendment 1 (ISO 12402-5:2006/Amd 1:2010) quipements individuels de flottabilit - Partie 5: Aides la flottabilit (niveau 50) - Exigences de scurit - Amendement 1 (ISO 12402-5:2006/Amd 1:2010) Persnliche Auftriebsmittel - Teil 5: Schwimmhilfen (Stufe 50) - Sicherheitstechnische Anforderungen - nderun
8、g 1 (ISO 12402-5:2006/Amd 1:2010) This amendment A1 modifies the European Standard EN ISO 12402-5:2006; it was approved by CEN on 5 May 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment into the relevant nat
9、ional standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This amendment exists in three official versions (English, French, German). A version in any oth
10、er language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark
11、, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATIO
12、N EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 12402-5:2006/A1:2010: EContents Page Foreword 3Annex ZA (informative) Relationship betwe
13、en this European Standard and the Essential Requirements of EU Directive 89/686/EEC 4EN ISO 12402-5:2006/A1:2010 (E) DIN EN ISO 12402-5/A1:2010-11 2 Foreword This document (EN ISO 12402-5:2006/A1:2010) has been prepared by Technical Committee ISO/TC 188 arm protection and lifejackets” the secretaria
14、t of which is held by DIN. This Amendment to the European Standard EN ISO 12402-5:2006/Amd 1:2010 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2010, and conflicting national standards shall be withdrawn at t
15、he latest by December 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to C
16、EN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standa
17、rds organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Po
18、land, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 12402-5:2006/Amd 1:2010 has been approved by CEN as a EN ISO 12402-5:2006/A1:2010 without any modification. “ Small craft” in collaboration with Technical Committee CEN/
19、TC 162 “Protective clothing including hand and EN ISO 12402-5:2006/A1:2010 (E) DIN EN ISO 12402-5/A1:2010-11 3 Page 1, Clause 2 Replace “ISO 12402-7:1)” with “ISO 12402-7:2006” and delete footnote 1) at the bottom of the page. Page 4, 5.1 In the first paragraph, delete the second sentence: “The temp
20、erature cycling test and the rotating shock bin test shall be considered as reliability against wear and tear and shall be conducted prior to the appropriate physical properties test.” Replace the second paragraph with the following: “Materials and components used for buoyancy aid shall comply with
21、ISO 12402-7 with the exception of ISO 12402-7:2006, 4.1.6.4.” In the third paragraph, replace the first and second sentences with the following: “An inflatable buoyancy aid complying with this part of ISO 12402 shall have automatic or manual inflation that allows for full compliance with all perform
22、ance requirements of this part of ISO 12402. Additionally, each chamber of the inflatable buoyancy aid shall have oral inflation.” In the third paragraph, last sentence, replace “ISO 12402-7:3)” with “ISO 12402-7:2006” and delete footnote 3) at the bottom of the page. Page 5, Table 1 In the fifth ro
23、w (retroreflective material), replace “M” with “O”. Page 6, 5.3.2.2 Add the following sentence at the end of 5.3.2.2: “The time from immersion until initiation of inflation in automatic mode shall not exceed 5 s.” EN ISO 12402-5:2006/A1:2010 (E) DIN EN ISO 12402-5/A1:2010-11 4 Page 6, 5.3.3 Replace
24、subclauses 5.3.3.1 and 5.3.3.2 with the following: “5.3.3.1 Any inherently buoyant material used to provide buoyancy shall be capable of withstanding compression and movement in normal wear without sustaining permanent loss of buoyancy.” “5.3.3.2 Any inherently buoyant material shall prove to have p
25、roperties in accordance with ISO 12402-7:2006, 4.8.” Delete footnote 4) from the bottom of the page. Page 6, Table 2 Replace Table 2 with the following: “Table 2 Minimum buoyancy User Parameter Child Adult Users mass, m (kg) 25 m u 40 40 m u 50 50 m u 60 60 m u 70 70 m Minimum buoyancy (N) 35 40 40
26、45 50 ” Page 7, 5.4.2 Replace the first paragraph with the following: “If required for water-rescue, there shall be affixed to the surface of the buoyancy aid at least 100 cm2area of material which is retroreflective of light and conforms to the specification in IMO Resolution A.658(16), Annex 2.” P
27、age 7, 5.5 Add the following at the end of 5.5: “The load shall be maintained for 5 min, if not specified otherwise.” Page 8, 5.6.2.3 In the third sentence, replace “lifejacket” with “buoyancy aid”. Page 10, 6.2 In the third paragraph (i.e. paragraph after list item v) and NOTE), replace the second
28、sentence with the following: “The label shall not shrink more than 10 % after washing.” EN ISO 12402-5:2006/A1:2010 (E) DIN EN ISO 12402-5/A1:2010-11 5 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC This European Standard
29、has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide one means of conforming to Essential Requirements of the New Approach Directive 89/686/EEC. Once this standard is cited in the Official Journal of the European Union under tha
30、t Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the products falling within the scope of this standard. EN ISO 12402-5:2006/A1:2010 (E) DIN EN ISO 12402-5/A1:2010-11 6
