1、ICS 83.080.01Kunststoffe Bestimmung von Druckeigenschaften (ISO 604 : 2002)European Standard EN ISO 604 : 2003 has the status of a DIN Standard.A comma is used as the decimal marker.National forewordThis standard has been published in accordance with a decision taken by CEN/TC 249 to adopt, withouta
2、lteration, International Standard ISO 604 as a European Standard.The responsible German body involved in its preparation was the Normenausschuss Kunststoffe (PlasticsStandards Committee), Technical Committee Mechanische Eigenschaften und Probekrperherstellung.The DIN Standards corresponding to the I
3、nternational Standards referred to in clause 2 of the EN are asfollows:ISO Standard DIN StandardISO 291 DIN EN ISO 291ISO 293 DIN EN ISO 293ISO 294-1 DIN EN ISO 294-1ISO 295 DIN EN ISO 295ISO 2818 DIN EN ISO 2818ISO 3167 DIN EN ISO 3167ISO 10724-1 DIN EN ISO 10724-1AmendmentsThis standard differs fr
4、om the February 1997 edition in that it has been completely revised.Previous editionsDIN 53454: 1952-10, 1971-04; DIN 53457: 1968-05, 1987-06, 1987-10; DIN EN ISO 604: 1997-02.Ref. No. DIN EN ISO 604 : 2003-12English price group 12 Sales No. 111204.04DEUTSCHE NORM December 2003EN ISO 604Continued ov
5、erleaf.EN comprises 21 pages. No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).PlasticsDetermination of compressive pro
6、perties(ISO 604 : 2002)English version of DIN EN ISO 604SupersedesFebruary 1997 edition.National Annex NAStandards referred to(and not included in Normative references, Bibliography and Annex ZA)DIN EN ISO 291 Plastics Standard atmospheres for conditioning and testing (ISO 291 : 1997)DIN EN ISO 293
7、Plastics Compression moulding test specimens of thermoplastic materials(ISO 293 : 1986)DIN EN ISO 294-1 Plastics Injection moulding of test specimens of thermoplastic materials Part 1:General principles and moulding of multipurpose and bar test specimens(ISO 294-1 : 1996)DIN EN ISO 295 Plastics Comp
8、ression moulding of test specimens of thermosetting materials(ISO 295 : 1991)DIN EN ISO 2818 Plastics Preparation of test specimens by machining (ISO 2818 : 1994)DIN EN ISO 3167 Plastics Multipurpose test specimens (ISO 3167 : 2002)DIN EN ISO 10724-1 Injection moulding of test specimens of thermoset
9、ting powder moulding compounds(PMCs) Part 1: General principles and moulding of multipurpose test specimens(ISO 10724-1 : 1998)Page 2DIN EN ISO 604 : 2003-12English versionICS 83.080.01Descriptors:PlasticsDetermination of compressive properties(ISO 604 : 2002) 2003. CEN All rights of exploitation in
10、 any form and by any meansreserved worldwide for CEN national members.Ref. No. EN ISO 604 : 2003 EKunststoffe Bestimmung von Druck-eigenschaften (ISO 604 : 2002)This European Standard was approved by CEN on 2003-06-26.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich sti
11、pulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Management Centre or to anyCEN member.The European Standards exist
12、 in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of A
13、ustria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Slovakia, Spain,Sweden, Switzerland, and the United Kingdom.EN ISO 604July 2003Management Centre: rue de Stassart 36, B-1050 BrusselsE
14、uropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr Normung|Plastiques Dtermination des pro-prits en compression(ISO 604 : 2002)Supersedes EN ISO 604 : 1996.Page 2EN ISO 604 : 2003ForewordInternational StandardISO 604 : 2002 Plastics Determination of compressive
15、 properties,which was prepared by ISO/TC 61 Plastics of the International Organization for Standardization, has beenadopted by Technical Committee CEN/TC 249 Plastics, the Secretariat of which is held by IBN, as a EuropeanStandard.This European Standard shall be given the status of a national standa
16、rd, either by publication of an identical textor by endorsement, and conflicting national standards withdrawn, by January 2004 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of thefollowing countries are bound to implement this European St
17、andard:Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland, and theUnited Kingdom.Endorsement noticeThe text of the International Standard ISO 604
18、: 2002 was approved by CEN as a European Standard without anymodification.NOTE: Normative references to international publications are listed in Annex ZA (normative).Page234467810101113151516171920Page 3EN ISO 604 : 2003Page 4EN ISO 604 : 2003Page 5EN ISO 604 : 2003Page 6EN ISO 604 : 2003Page 7EN IS
19、O 604 : 2003Page 8EN ISO 604 : 2003Page 9EN ISO 604 : 2003Page 10EN ISO 604 : 2003Page 11EN ISO 604 : 2003Page 12EN ISO 604 : 2003Page 13EN ISO 604 : 2003Page 14EN ISO 604 : 2003Page 15EN ISO 604 : 2003Page 16EN ISO 604 : 2003Page 17EN ISO 604 : 2003Page 18EN ISO 604 : 2003Page 19EN ISO 604 : 2003Page 20EN ISO 604 : 2003Page 21EN ISO 604 : 2003
