1、June 2009DEUTSCHE NORM English price group 11No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 53.100!$WwK“1528440www.di
2、n.deDDIN EN ISO 6682Earth-moving machinery Zones of comfort and reach for controls (ISO 6682:1986, includingAmendment 1:1989)English version of DIN EN ISO 6682:2009-06Erdbaumaschinen Stellteile Bequemlichkeitsbereiche und Reichweitenbereiche (ISO 6682:1986, einschlielichnderung 1:1989)Englische Fass
3、ung DIN EN ISO 6682:2009-06SupersedesDIN EN ISO 6682:1995-04www.beuth.deDocument comprises 17 pagesDIN EN ISO 6682:2009-06 2 Start of validity This standard takes effect on 1 June 2009. DIN EN ISO 6682:1995-04 may be used in parallel until 28 December 2009. National foreword This standard includes s
4、afety requirements. This standard has been prepared by Technical Committee ISO/TC 127 “Earth-moving machinery” in collaboration with Technical Committee CEN/TC 151 “Construction equipment and building material machines Safety” (Secretariat: DIN, Germany). The responsible German body involved in its
5、preparation was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Section Bau- und Baustoffmaschinen. Representatives of manufacturers and users of earth-moving machinery, and of the employers liability insurance associations contributed to this standard. Amendment of th
6、e European Machinery Directive has made it necessary to review the previously valid standard, EN ISO 6682:1995, in terms of the essential requirements of the new European Machinery Directive, 2006/42/EC. This standard contains specifications meeting the essential requirements set out in Annex I of t
7、he “Machinery Directive”, Directive 98/37/EC (valid until 28 December 2009), and the “revised Machinery Directive”, Directive 2006/42/EC, which takes effect on 29 December 2009, and which apply to earth-moving machinery that is either first placed on the market or commissioned within the EEA. This s
8、tandard serves to facilitate proof of compliance with the essential requirements of the directives. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requireme
9、nts of the Machinery Directive (“presumption of conformity”). For the International Standards referred to in clause 2 of this standard there are no national standards available unless they have been published as DIN EN ISO Standards with the same number. Amendments This standard differs from DIN EN
10、ISO 6682:1995-04 as follows: a) Annex ZA (informative) “Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC” has been updated. b) Annex ZB (informative) “Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42
11、/EC” has been added. Previous editions DIN EN ISO 6682: 1995-04 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 6682 September 2008 ICS 53.100 Supersedes EN ISO 6682:1995English Version Earth-moving machinery Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989) Engi
12、ns de terrassement Zones de confort et daccessibilit des commandes (ISO 6682:1986, Amd 1:1989 inclus) Erdbaumaschinen Stellteile Bequemlichkeitsbereiche und Reichweitenbereiche (ISO 6682:1986, einschlielich Amd 1:1989) This European Standard was approved by CEN on 25 August 2008. CEN members are bou
13、nd to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CE
14、N Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same statu
15、s as theofficial versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Sl
16、ovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reserved world
17、wide for CEN national Members. Ref. No. EN ISO 6682:2008: EDIN EN ISO 6682:2009-06 EN ISO 6682:2008 (E) 2 Contents Page Foreword3 1 Scope.4 2 Field of application.4 3 References 4 4 Definitions .4 5 Control location zones.5 Annex A Specific conditions used to derive control location zones .6 Annex B
18、 Summary of coordinates for defining control location zones.7 Requirements of EU Directive 98/37/EC .14 Requirements of EU Directive 2006/42/EC . 15 Annex ZA (informative) Relationship between this European Standard and the Essential Annex ZB (informative) Relationship between this European Standard
19、 and the Essential DIN EN ISO 6682:2009-06 EN ISO 6682:2008 (E) Foreword The text of ISO 6682:1986, including Amd 1:1989 has been prepared by Technical Committee ISO/TC 127 “Earth-moving machinery” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 6682:200
20、8 by Technical Committee CEN/TC 151 “Construction equipment and building material machines - Safety” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March
21、2009, and conflicting national standards shall be withdrawn at the latest by December 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent ri
22、ghts. This document supersedes EN ISO 6682:1995. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directive(s). For relationship with EC Directive(s), see informative Annexes ZA
23、and ZB, which are integral parts of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
24、Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 6682:1986, including Amd 1:1989 has been approved by CEN
25、as a EN ISO 6682:2008 without any modification. 3DIN EN ISO 6682:2009-06 EN ISO 6682:2008 (E) 4DIN EN ISO 6682:2009-06 EN ISO 6682:2008 (E) 5DIN EN ISO 6682:2009-06 EN ISO 6682:2008 (E) 6DIN EN ISO 6682:2009-06 EN ISO 6682:2008 (E) 7DIN EN ISO 6682:2009-06 EN ISO 6682:2008 (E) 8DIN EN ISO 6682:200-0
26、6 EN ISO 6682:2008 (E) Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a me
27、ans of conforming to Essential Requirements of the New Approach Directive 2006/42/EC on machinery. Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the no
28、rmative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements 1.1.6, 1.2.2, 3.3.1 of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable
29、to the product(s) falling within the scope of this standard. 15DIN EN ISO 6682:2009-06 EN ISO 6682:2008 (E) 10DIN EN ISO 6682:2009-06 EN ISO 6682:2008 (E) 11DIN EN ISO 6682:2009-06 EN ISO 6682:2008 (E) 12DIN EN ISO 6682:2009-06 EN ISO 6682:2008 (E) 13DIN EN ISO 6682:2009-06 EN ISO 6682:2008 (E) Anne
30、x ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essentia
31、l Requirements of the New Approach Directive Machinery 98/37/EC, amended by 98/79/EC. Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative claus
32、es of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements 1.1.2.d, 1.2.2 and 3.3.1 of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the p
33、roduct(s) falling within the scope of this standard. 14DIN EN ISO 6682:2009-06 EN ISO 6682:2008 (E) Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CEN by th
34、e European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive 2006/42/EC on machinery. Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemente
35、d as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements 1.1.6, 1.2.2, 3.3.1 of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard. 15
