1、October 2014 Translation by DIN-Sprachendienst.English price group 13No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC
2、S 59.120.01; 17.140.20!%;je“2247166www.din.deDDIN EN ISO 9902-1Textile machinery Noise test code Part 1: Common requirements (ISO 9902-1:2001 + Amd 1:2009 +Amd 2:2014);English version EN ISO 9902-1:2001 + A1:2009 + A2:2014,English translation of DIN EN ISO 9902-1:2014-10Textilmaschinen Geruschmessve
3、rfahren Teil 1: Gemeinsame Anforderungen (ISO 9902-1:2001 + Amd 1:2009 + Amd 2:2014);Englische Fassung EN ISO 9902-1:2001 + A1:2009 + A2:2014,Englische bersetzung von DIN EN ISO 9902-1:2014-10Matriel pour lindustrie textile Code dessai acoustique Partie 1: Exigences communes (ISO 9902-1:2001 + Amd 1
4、:2009 + Amd 2:2014);Version anglaise EN ISO 9902-1:2001 + A1:2009 + A2:2014,Traduction anglaise de DIN EN ISO 9902-1:2014-10SupersedesDIN EN ISO 9902-1:2009-12See start of applicationwww.beuth.deDocument comprises 26 pagesIn case of doubt, the German-language original shall be considered authoritati
5、ve.09.14 DIN EN ISO 9902-1:2014-10 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2014-10-01. DIN EN ISO 9902-1:2009-12 may be used in parallel until 2015-01-31. National foreword This standard includes safety requirements within the meanin
6、g of the Produktsicherheitsgesetz (ProdSG) (German Product Safety Act). This document (EN ISO 9902-1:2001 + A1:2009 + A2:2014) has been prepared by Technical Committee ISO/TC 72 “Textile machinery and accessories“, Subcommittee SC 8 “Safety requirements for textile machinery“ in collaboration with T
7、echnical Committee CEN/TC 214 “Textile machinery and accessories”, Working Group WG 4 “Measurement and reduction of noise” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the DIN-Normenausschuss Textil und Textilmaschinen (DIN Standards Committee Textiles and
8、 Textile Machinery), Working Committee NA 106-02-01 AA Gemeinschaftsarbeitsausschuss BG Textil/Textilnorm: Textilmaschinen Sicherheitsanforderungen, Lrmminderung, Bildzeichen; SpA zu ISO/TC 72/SC 8/WG 1, ISO/TC 72/SC 8/WG 2, ISO/TC 72/SC 10, CEN/TC 214/WG 1 und CEN/TC 214/WG 4. The start and finish
9、of text introduced or altered by Amendments A1:2009 and A2:2014 is indicated in the text by tags !“ and #$ respectively. DIN EN ISO 9902 consists of the following parts, under the general title Textile machinery Noise test code: Part 1: Common requirements Part 2: Spinning preparatory and spinning m
10、achinery Part 3: Nonwoven machinery Part 4: Yarn processing, cordage and rope manufacturing machinery Part 5: Weaving and knitting preparatory machinery Part 6: Fabric manufacturing machinery Part 7: Dyeing and finishing machinery Amendment of the European Machinery Directive has made it necessary t
11、o review the previously valid standard, EN ISO 9902-1:2001, in terms of the essential requirements of the new European Machinery Directive, 2006/42/EC. This standard contains specifications meeting the essential requirements set out in Annex I of the “Machinery Directive”, Directive 2006/42/EC, effe
12、ctive from 29 December 2009, and which apply to machines that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of that directive. DIN EN ISO 9902-1:2014-10 3 Once this standard is cited in the
13、 Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). The DIN Standards corresponding to the International Standards referred
14、to in this document are as follows: ISO 3740 DIN EN ISO 3740 ISO 9902-7 DIN EN ISO 9902-7 ISO 3743-1 DIN EN ISO 3743-1 ISO 11111-1 DIN EN ISO 11111-1 ISO 3744 DIN EN ISO 3744 ISO 11111-2 DIN EN ISO 11111-2 ISO 3746 DIN EN ISO 3746 ISO 11111-3 DIN EN ISO 11111-3 ISO 3747 DIN EN ISO 3747 ISO 11111-4 D
15、IN EN ISO 11111-4 ISO 4871 DIN EN ISO 4871 ISO 11111-5 DIN EN ISO 11111-5 ISO 7574-1 DIN EN 27574-1 ISO 11111-6 DIN EN ISO 11111-6 ISO 9614-1 DIN EN ISO 9614-1 ISO 11111-7 DIN EN ISO 11111-7 ISO 9614-2 DIN EN ISO 9614-2 ISO 11200 DIN EN ISO 11200 ISO 9902-2 DIN EN ISO 9902-2 ISO 11201 DIN EN ISO 112
16、01 ISO 9902-3 DIN EN ISO 9902-3 ISO 11202 DIN EN ISO 11202 ISO 9902-4 DIN EN ISO 9902-4 ISO 11203 DIN EN ISO 11203 ISO 9902-5 DIN EN ISO 9902-5 ISO 11204 DIN EN ISO 11204 ISO 9902-6 DIN EN ISO 9902-6 Amendments This standard differs from DIN EN ISO 9902-1:2009-12 as follows: a) in Subclause 5.1, a n
17、ote has been added stating that grade 1 methods are normally not feasible for textile machinery; b) in Subclause 6.1, a note has been added stating that grade 1 methods are normally not feasible for textile machinery; c) Annex ZA has been revised. Previous editions DIN 45635-32: 1980-05 DIN 45635-32
18、 Supplement 1: 1981-04 DIN EN ISO 9902-1: 2001-07, 2009-12 DIN EN ISO 9902-1:2014-10 4 National Annex NA (informative) Bibliography DIN EN 27574-1, Acoustics Statistical methods for determining and verifying stated noise emission values of machinery and equipment Part 1: General principles and defin
19、itions DIN EN ISO 3740, Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards DIN EN ISO 3743-1, Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small, movable sourc
20、es in reverberant fields Part 1: Comparison method for a hard-walled test room DIN EN ISO 3744, Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane DIN EN ISO 3746, Acous
21、tics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane DIN EN ISO 3747, Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pre
22、ssure Engineering/survey methods for use in situ in a reverberant environment DIN EN ISO 4871, Acoustics Declaration and verification of noise emission values of machinery and equipment DIN EN ISO 9614-1, Acoustics Determination of sound power levels of noise sources using sound intensity Part 1: Me
23、asurement at discrete points DIN EN ISO 9614-2, Acoustics Determination of sound power levels of noise sources using sound intensity Part 2: Measurement by scanning DIN EN ISO 9902-2, Textile machinery Noise test code Part 2: Spinning preparatory and spinning machinery DIN EN ISO 9902-3, Textile mac
24、hinery Noise test code Part 3: Nonwoven machinery DIN EN ISO 9902-4, Textile machinery Noise test code Part 4: Yarn processing, cordage and rope manufacturing machinery DIN EN ISO 9902-5, Textile machinery Noise test code Part 5: Weaving and knitting preparatory machinery DIN EN ISO 9902-6, Textile
25、machinery Noise test code Part 6: Fabric manufacturing machinery DIN EN ISO 9902-7, Textile machinery Noise test code Part 7: Dyeing and finishing machinery DIN EN ISO 11111-1, Textile machinery Safety requirements Part 1: Common requirements DIN EN ISO 11111-2, Textile machinery Safety requirements
26、 Part 2: Spinning preparatory and spinning machinery DIN EN ISO 9902-1:2014-10 5 DIN EN ISO 11111-3, Textile machinery Safety requirements Part 3: Nonwoven machinery DIN EN ISO 11111-4, Textile machinery Safety requirements Part 4: Yarn processing, cordage and rope manufacturing machinery DIN EN ISO
27、 11111-5, Textile machinery Safety requirements Part 5: Weaving and knitting preparatory machinery DIN EN ISO 11111-6, Textile machinery Safety requirements Part 6: Fabric manufacturing machinery DIN EN ISO 11111-7, Textile machinery Safety requirements Part 7: Dyeing and finishing machinery DIN EN
28、ISO 11200, Acoustics Noise emitted by machinery and equipment Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions DIN EN ISO 11201, Acoustics Noise emitted by machinery and equipment Determination of emi
29、ssion sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections DIN EN ISO 11202, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work
30、 station and at other specified positions applying approximate environmental corrections DIN EN ISO 11203, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level DIN EN ISO 11204
31、, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections DIN EN ISO 9902-1:2014-10 6 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCH
32、E NORM EN ISO 9902-1 March 2001 + A1 +A2 March 2009 July 2014 ICS 17.140.20; 59.120.01 English Version Textile machinery Noise test code Part 1: Common requirements (ISO 9902-1:2001 + Amd 1:2009 + Amd 2:2014) Matriel pour lindustrie textile - Code dessai acoustique - Partie 1: Exigences communes (IS
33、O 9902-1:2001 + Amd 1:2009 + Amd 2:2014) Textilmaschinen - Geruschmessverfahren Teil 1: Gemeinsame Anforderungen (ISO 9902-1:2001 + Amd 1:2009 + Amd 2:2014) EN ISO 9902-1:2001 was approved by CEN on 2001-03-15, Amendment A1:2009 on 2009-03-12 and Amendment A2:2014 on 2014-05-07. CEN members are boun
34、d to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CE
35、N-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre h
36、as the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, L
37、uxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2014
38、CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 9902-1:2001 + A1:2009 + A2:2014 E Contents Page Foreword to EN ISO 9902-1:2001 3 Foreword to EN ISO 9902-1:2001/A1:2009 .4 Introduction.6 1 Scope 7 2 Normative references 7 3 Term
39、s and definitions .8 4 Defining the test object .9 5 Sound power level determination 9 6 Emission sound pressure level determination.10 7 Installation and mounting conditions10 8 Operating conditions. 11 9 Measurement uncertainties 12 10 Information to be recorded .13 11 Information to be reported13
40、 12 Declaration and verification of noise emission values14 Annex A (informative) Forms for recording and reporting noise emission data of textile machinery.15 Annex ZA (informative) Relationship between this International Standard and the Essential Requirements of EU Directive 2006/42/EC .19 Annex
41、ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC .20 DIN EN ISO 9902-1:2014-10 EN ISO 9902-1:2001+ A1:2009 + A2:2014 (E)2Foreword to EN ISO 9902-1:2001/A2:2014 .5 # $!“ !“#$Foreword to EN ISO 9902-1:2001 This document (EN ISO 9902
42、-1:2001) has been prepared by Technical Committee ISO/TC 72 “Textile machinery and machinery for dry-cleaning and industrial laundering” in collaboration with Technical Committee CEN/TC 214 “Textile machinery and machinery for dry-cleaning and industrial laundering”, the secretariat of which is held
43、 by SNV. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2001, and conflicting national standards shall be withdrawn at the latest by September 2001. This document has been prepared unde
44、r a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZB, which is an integral part of this document. According to the CEN/CENELEC Internal Regu
45、lations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, N
46、orway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 9902-1:2001 has been approved by CEN as EN ISO 9902-1:2001 without any modification. NOTE Normative references to International Standards are listed in Annex ZA (normative).
47、 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN/CENELEC shall not be held responsible for identifying any or all such patent rights. This first edition of ISO 9902-1, together with ISO 9902-2, ISO 9902-3, ISO 9902-4, ISO 9902
48、-5, ISO 9902-6 and ISO 9902-7, cancels and replaces ISO 9902:1993, which has been technically revised. ISO 9902 consists of the following parts, under the general title Textile machinery Noise test code: Part 1: Common requirements Part 2: Spinning preparatory and spinning machinery Part 3: Nonwoven machinery Part 4: Yarn processing, cordage and rope manufacturing machinery
