1、October 2014 Translation by DIN-Sprachendienst.English price group 13No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC
2、S 17.140.20; 59.120.50!%;jl“2247173www.din.deDDIN EN ISO 9902-7Textile machinery Noise test code Part 7: Dyeing and finishing machinery (ISO 9902-7:2001 + Amd 1:2009 + Amd 2:2014);English version EN ISO 9902-7:2001 + A1:2009 + A2:2014,English translation of DIN EN ISO 9902-7:2014-10Textilmaschinen G
3、eruschmessverfahren Teil 7: Textilveredlungsmaschinen(ISO 9902-7:2001 + Amd 1:2009 + Amd 2:2014);Englische Fassung EN ISO 9902-7:2001 + A1:2009 + A2:2014,Englische bersetzung von DIN EN ISO 9902-7:2014-10Matriel pour lindustrie textile Code dessai acoustique Partie 7: Machines de teinture et de fini
4、ssage(ISO 9902-7:2001 + Amd 1:2009 + Amd 2:2014);Version anglaise EN ISO 9902-7:2001 + A1:2009 + A2:2014,Traduction anglaise de DIN EN ISO 9902-7:2014-10SupersedesDIN EN ISO 9902-7:2009-12See start of applicationwww.beuth.deDocument comprises 2 pagesIn case of doubt, the German-language original sha
5、ll be considered authoritative.8DIN EN ISO 9902-7:2014-10 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2014-10-01. DIN EN ISO 9902-7:2009-12 may be used in parallel until 2014-12-31. National foreword This standard includes safety require
6、ments within the meaning of the Produktsicherheitsgesetz (ProdSG) (German Product Safety Act). This document (EN ISO 9902-7:2001 + A1:2009 + A2:2014) has been prepared by Technical Committee ISO/TC 72 “Textile machinery and accessories”, Subcommittee SC 8 “Safety requirements for textile machinery”
7、in collaboration with Technical Committee CEN/TC 214 “Textile machinery and accessories”, Working Group WG 4 “Measurement and reduction of noise” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the Normenausschuss Materialprfung (Materials Testing Standards C
8、ommittee), Working Committee NA 106-02-01 AA Gemeinschaftsarbeitsausschuss BG Textil/Textilnorm: Textilmaschinen Sicherheitsanforderungen, Lrmminderung, Bildzeichen; SpA zu ISO/TC 72/SC 8/WG 1, ISO/TC 72/SC 8/WG 2, ISO/TC 72/SC 10, CEN/TC 214/WG 1 und CEN/TC 214/WG 4. The start and finish of text in
9、troduced or altered by Amendments A1:2009 and A2:2014 is indicated in the text by tags !“ and #$ respectively. DIN EN ISO 9902 consists of the following parts, under the general title Textile machinery Noise test code: Part 1: Common requirements Part 2: Spinning preparatory and spinning machinery P
10、art 3: Nonwoven machinery Part 4: Yarn processing, cordage and rope manufacturing machinery Part 5: Weaving and knitting preparatory machinery Part 6: Fabric manufacturing machinery Part 7: Dyeing and finishing machinery Amendment of the European Machinery Directive has made it necessary to review t
11、he previously valid standard, EN ISO 9902-7:2001, in terms of the essential requirements of the new European Machinery Directive, 2006/42/EC. This standard contains specifications meeting the essential requirements set out in Annex I of the “Machinery Directive”, Directive 2006/42/EC, effective from
12、 29 December 2009, and which apply to machines that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of that directive. DIN EN ISO 9902-7:2014-10 3 Once this standard is cited in the Official
13、Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). The DIN Standards corresponding to the International Standards referred to in this
14、 document are as follows: ISO 1506 DIN ISO 1506 ISO 9614-2 DIN EN ISO 9614-2 ISO 3744 DIN EN ISO 3744 ISO 9902-1 DIN EN ISO 9902-1 ISO 3746 DIN EN ISO 3746 ISO 11201 DIN EN ISO 11201 ISO 3747 DIN EN ISO 3747 ISO 11202 DIN EN ISO 11202 ISO 9614-1 DIN EN ISO 9614-1 ISO 11204 DIN EN ISO 11204 Amendment
15、s This standard differs from DIN EN ISO 9902-7:2009-12 as follows: a) in Subclause 1, a note has been added stating that grade 1 methods are normally not feasible for textile machinery; b) Annex ZA has been revised. Previous editions DIN 45635-32: 1980-05 DIN EN ISO 9902-7: 2001-07, 2009-12 DIN EN I
16、SO 9902-7:2014-10 4 National Annex NA (informative) Bibliography DIN ISO 1506, Textile machinery Dyeing, finishing and allied machinery Classification and nomenclature DIN EN ISO 3744, Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Enginee
17、ring methods for an essentially free field over a reflecting plane DIN EN ISO 3746, Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane DIN EN ISO 3747, Acoustics Det
18、ermination of sound power levels and sound energy levels of noise sources using sound pressure Engineering/survey methods for use in situ in a reverberant environment DIN EN ISO 9614-1, Acoustics Determination of sound power levels of noise sources using sound intensity Part 1: Measurement at discre
19、te points DIN EN ISO 9614-2, Acoustics Determination of sound power levels of noise sources using sound intensity Part 2: Measurement by scanning DIN EN ISO 9902-1, Textile machinery Noise test code Part 1: Common requirements DIN EN ISO 11201, Acoustics Noise emitted by machinery and equipment Dete
20、rmination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections DIN EN ISO 11202, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure
21、levels at a work station and at other specified positions applying approximate environmental corrections DIN EN ISO 11204, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environme
22、ntal corrections EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 9902-7 March 2001 + A1 +A2 March 2009 June 2014 ICS 17.140.20; 59.120.50 English Version Textile machinery Noise test code Part 7: Dyeing and finishing machinery (ISO 9902-7:2001 + Amd 1:2009 + Amd 2:2014) Matriel pour lindust
23、rie textile - Code dessai acoustique - Partie 7: Machines de teinture et de finissage (ISO 9902-7:2001 + Amd 1:2009 + Amd 2:2014) Textilmaschinen - Geruschmessverfahren - Teil 7: Textilveredlungsmaschinen (ISO 9902-7:2001 + Amd 1:2009 + Amd 2:2014) EN ISO 9902-7:2001 was approved by CEN on 2001-03-1
24、5, Amendment A1:2009 on 2009-03-12 and Amendment A2:2014 on 2014-05-07. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliograp
25、hical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibili
26、ty of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic o
27、f Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATI
28、ON EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 9902-7:2001 + A1:2009 + A2:2014 E Contents Page Foreword to EN ISO 9902-7:2001 3 Forewo
29、rd to EN ISO 9902-7:2001/A1:2009 .4 1 Scope 6 2 Normative references 6 3 Terms and definitions .7 4 Defining the test object .7 5 Sound power level determination 7 6 Emission sound pressure level determination.8 7 Installation and mounting conditions14 8 Operating conditions.14 9 Measurement uncerta
30、inties 14 10 Information to be recorded .14 11 Information to be reported14 12 Declaration and verification of noise emission values14 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC .23 Annex ZB (informative) Relationship
31、between this European Standard and the Essential Requirements of EU Directive 2006/42/EC .24 2DIN EN ISO 9902-7:2014-10 EN ISO 9902-7:2001+A1:2009 + A2:2014! “# $Foreword to EN ISO 9902-7:2001/A2:2014.5 #$!“(E)3DIN EN ISO 9902-7:2014-10 EN 9902-7:2001+A1:2009 + A2:2014 (E)ISOForeword to EN ISO 9902-
32、7:2001 This document (EN ISO 9902-7:2001) has been prepared by Technical Committee ISO/TC 72 “Textile machinery and machinery for dry-cleaning and industrial laundering” in collaboration with Technical Committee CEN/TC 214 “Textile machinery and machinery for dry-cleaning and industrial laundry”, th
33、e secretariat of which is held by SNV. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2001, and conflicting national standards shall be withdrawn at the latest by September 2001. This d
34、ocument has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZB, which is an integral part of this document. According to
35、 the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxe
36、mbourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 9902-7:2001 has been approved by CEN as EN ISO 9902-7:2001 without any modification. NOTE Normative references to International Standards are li
37、sted in Annex ZA (normative). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN/CENELEC shall not be held responsible for identifying any or all such patent rights. This first edition of ISO 9902-7, together with ISO 9902-1, ISO
38、 9902-2, ISO 9902-3, ISO 9902-4, ISO 9902and ISO 9902-6, cancels and replaces ISO 9902:1993, which has been technically revised. ISO 9902 consists of the following parts, under the general title Textile machinery Noise test code: Part 1: Common requirements Part 2: Spinning preparatory and spinning
39、machinery Part 3: Nonwoven machinery Part 4: Yarn processing, cordage and rope manufacturing machinery Part 5: Weaving and knitting preparatory machinery Part 6: Fabric manufacturing machinery Part 7: Dyeing and finishing machinery Annex ZB of this part of ISO 9902 is for information only. !Foreword
40、 to EN ISO 9902-7:2001/A1:2009 This document (EN ISO 9902-7:2001/A1:2009) has been prepared by Technical Committee ISO/TC 72 “Textile machinery and machinery for dry-cleaning and industrial laundering” in collaboration with Technical Committee CEN/TC 214 “Textile machinery and accessories”, the secr
41、etariat of which is held by SNV. This Amendment to the European Standard EN ISO 9902-7:2001 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2009, and conflicting national standards shall be withdrawn at the la
42、test by December 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by
43、 the European Commission and the European Free Trade Association, and supports essential requirements of EU Directives. For relationship with EU Directives, see informative Annexes ZA and ZB, which are integral parts of this document. According to the CEN/CENELEC Internal Regulations, the national s
44、tandards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland
45、, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice 4DIN EN ISO 9902-7:2014-10 EN ISO 9902-7:2001+A1:2009 +A2:2014 (E)The text of ISO 9902-7:2001/Amd 1:2009 has been approved by CEN as EN ISO 9902-7:2001/A1:2009 without any modification. “ #
46、Foreword to EN ISO 9902-7:2001/A2:2014 This document (EN ISO 9902-7:2001/A2:2014) has been prepared by Technical Committee ISO/TC 72 “Textile machinery and accessories” in collaboration with Technical Committee CEN/TC 214 “Textile machinery and accessories” the secretariat of which is held by SNV. T
47、his Amendment to the European Standard EN ISO 9902-7:2001 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2014, and conflicting national standards shall be withdrawn at the latest by December 2014. Attention is
48、 drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the Eu
49、ropean Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Re
