1、A-A-50211A February 5, 1988 SUPERSEDING A-A-50 2 11 July 6, 1986 COMMERCIAL ITEM DESCRIPTION ROD, STADIA (FOLDING) The General Services Administration has authorized the use of this commercial item description in preference to Federal Specification GG-R-550. This description covers two types of fold
2、ing stadia rods: Type I - decimal -English graduations, and Type II metric graduations. Salient characteristics: Design: The stadia rod (English graduations) shall have an overall length of 12 to 14 feet. The rod shall be provided with self locking hinges for center folding and be rigid when fully e
3、xtended. The rod shall be 2-718 inches to 3 inches wide, and shall have black grad- uations against a white background with red or orange numerals, graduated in feet, tenths and 112 tenths. The stadia rod (Metric graduations) shall have an overall length of 4 meters, shall be pro- vided with a self
4、locking hinge to fold at the 2 meter mark, and shall be rigid when fully extended. The rod shall be 2-718 inches to3 inches wide, and shall have black graduations against a white background with red or orange numerals, graduated in meters, decimeters, and centi- meters. When folded, the rods shall f
5、old flat with the sections in alignment. Tolerances: Tolerances for the graduations shall be plus or minus 0.01 inch on decimals, and plus or minus 1/64 inch on fractions. Materials: Hardwood. Hardwood shall be maple or basswood and shall be free of decay, splits, streaks, checks, shakes, wane, hole
6、s, warp, and bow. Softwood. Softwood shall be Port Orford cedar, ponderosa pine, white pine, sugar pine, or spruce. Softwood shall be free of decay, splits, AMSC N/A FSC 6675 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. /THIS DOCUMENT CONTAINS 3 PAGES. - Provided
7、 by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-50211A streaks, checks, shakes, wane, holes exceeding 1/16 inch in diameter, and knots exceeding 1/2 inch in average diameter. and knots shall be sound and tight. mitted. dimension of the rod and shall not
8、exceed 1 inch in 30 inches in the narrow dimension of the rod. Holes shall be filled Knots in clusters will not be per- Slope o grain shall not exceed l inch in 10 inches in the wider The wood shall not be warped or bowed. Part number, The part number for the rods, stadia shall be as follows: AA5021
9、1 - x Type I or II - Document number Regulatory requirements: materials in accordance with Public Law 94-580 to the maximum extent practicable. The offeror/contractor is encouraged to use recovered Packaging and marking, are to overseas Department of Defense (DOD) consignees. may be specified for sh
10、ipments to DoD consignees within the continental United States and to non-DoD consignees worldwide. When a suppliers normal packaging will satisfy the requirements for military packaging, it may be used. Military packaging shall be specified when shipments Commercial packaging Military packaging. ag
11、ainst physical damage and deterioration in a logistic environment characterized by the following: Each stadia rod shall be preserved and packed to protect 1, 2. Shock, vibration, and static loading forces during worldwide shipment 3. 4. 5. Multiple handling during transportation and in-transit stora
12、ge. by all transport modes, Uncontrolled warehouse storage for extended periods. Weather exposure during shipment and in-transit: transfers. Stacking loads during shipment and storage. Quantities of stadia rods of like description destined to a single addressee may be unitized into one or more unit
13、loads. Commercial. normal method for retail distribution. like description shipped to a single destination may be unitized to permit handling as a single unit, Freight Classification or National Motor Freight Classification rules. Each stadia rod shall be packaged in accordance with the suppliers In
14、dividually packaged stadia rods of Shipping containers shall comply with Uniform Marking, Unit, intermediate (when provided), and exterior packs shall be marked with the item nomenclature, stock or part number, quantity per pack, and contract number as a minimum; additional marking shall be as speci
15、fied in the contract or order. consignees address. contrasting color, of an appropriate size, and of waterproof materials. Exterior packs shall have in addition the complete Markings shall be applied in a legible manner, in a 2 Provided by IHSNot for ResaleNo reproduction or networking permitted wit
16、hout license from IHS-,-,-A-A-502LlA bb rn 777777LI 0020lb3 b rn Custodians Army - ME PREPARING ACTIVITY: A-A-50211A Quality assurance. defects. The stadia rods shall be examined for the following Presence of one or more defects shall be cause for rejection. 1. Materials not as specified. 2. Dimensi
17、ons not as specified. 3. Graduations not as specified. 4. Tolerances for graduations not as specified. 5. Packaging and marking not as specified. Certification of commercial item. offered to the Government meets the salient characteristics of this descriDtion The contractor shall certify that the pr
18、oduct and that the product conforms to the producers own drawings, specifications, standards, and quality assurance practices and is the same product as the manufacturers current product offered by the contractor in the commercial marketplace for at least one year preceding the solicitation. The Gov
19、ernment reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. Small business. A small business that cannot meet the certification-of- commercial-item requirement of this document, may make
20、 an offer under this solicitation; and, if such small business is the apparent successful offeror, the Government may require the small business to submit a sample folding stadia rod. Any such stadia rod may be evaluated for this solicitation if time to contract award permits. Such evaluation would
21、be to determine conformance to all requirements of this commercial item description and to determine equivalency to folding stadia rods available in the commercial marketplace in the areas of accuracy, durability, human factors engineering, and safety. It should be noted that samples are not require
22、d unless specifically requested by the contracting officer. Note. sample from an apparent low offerer for award for this solicitation if a determination of urgency is made by the contracting officer. then be evaluated prior to future solicitation for comparable items. The Government may elect not to
23、 evaluate a The sample would Notes : 1. Purchasers should specify type of folding stadia rods required. 2. When this commercial item description is used for procurement, the commercial item certification clause must appear in the solicitation. MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITIES: GSA - FCGC VA - OSS Review Activity DLA - GS Army - ME Project 6675-0812 3 i:- , Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
