1、A-A-55133 m 9999974 0320787 767 m Beneficial comments, recommendations, additions, deletions, clarifications, etc., and any data which may improve this document should be sent to: Commander, Space and Naval Warfare Command, ATTN: SPAWAR 003-114/031, Washington, DC 20363. INCH-POUND A-A- 5 5 13 3 Dec
2、ember 10, 1992 COMMERCIAL ITEM DESCRIPTION LIGHT, CHEMILUMINESCENT, 6-IN - 30 MIN - G The General Services Administration has authorized the use of this commercial item description. Abstract. This description covers a 30 minute 6 inch chemiluminescent light (commonly known as a light wand) used for
3、a variety of lighting, marking, and identification purposes. Salient characteristics. 1. Color. The color of the chemiluminescent light described in this CID is white. The color wand required shall be identified in the Part Identification Number (PIN) paragraph of this CID. AMSC N/A FSC 6260 DISTRIB
4、UTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55 13 3 2. Desisn. The chemiluminescent light shall be elongated having an overall length of 6 inches plus 0.043 minus 0.37
5、5 inches. The mid point diameter shall be no less than .500 inches and the wand shall have a flat base on one end. The diameter of the flat end shall not exceed .750 inches. The end opposite the flat base shall have a hole .188 inches nominal. Lightsticks shall have a tapered shape and shall be comp
6、atible with accessory items; Lightstick Shield (NSN 6260-01-196-0637), Ground Stake (NSN 6260-01-230-8555), Flare, Surface Trip (NSN 6260-01-247-2937), Handle, six (6) inch (NSN 6260-01-255-3345), and Magnetic Base (NSN 6260-01-255-3346). Lightsticks shall be individually wrapped in an airtight wrap
7、per. 3. Interior. The chemiluminescent light specified in this Commercial Item Description shall produce a level of light intensity as specified in Table I for a specified length of time (30 minutes). 4. Material Safety Data Sheet. Manufacturer shall provide evidence in the form of a Material Safety
8、 Data Sheet (MSDS) (Fed-Std-313) that the components shall not be highly toxic, toxic, corrosive or irritant in terms of the definitions and tests in Code of Federal Regulations, Title 16, Part 1500 (Federal Hazardous Substances Act). 5. Test criteria. Illuminance must meet or exceed the data presen
9、ted in Table I. The integrated luminance over 15 minutes starting at 5 seconds after activation measured at 75 degrees F on lightsticks a minimum of 30 days after manufacture, but not more than 90 days, must meet or exceed 12.60 foot lambert-hours - Color G (white). After Ageing Test, illuminance mu
10、st meet or exceed data in Table II. breaking the inner vial and shaking to combine components. tube shall not leak and vial will not break when subjected to an external pressure equivalent to 30,000 feet at 75 degrees F in a vacuum chamber. Must withstand, while still in wrapper, a free fall from a
11、height of 8.5 feet on a hard surface (concrete) without activating or leakage. Activated by manually flexing the plastic tube, Plastic 6. Test conditions. a. Meter: Digital Photometer, TEKTRONIX, Model J16, Sensor Probe J6501. All meters traceable to NIST. b. Wand to Tektronix J16 Meter Distance: 1.
12、50 inches 2 0.02 inches. Wand to Luminance Meter Distance: 12 inches c. Temperature stabilization: Wands while still in sealed foil wrappers, will be placed in a water bath test temperature for a minimum of one (1) hour before activation for the 75 F test temperature and for a minimum of two (2) hou
13、rs for the 32 F test temperature. d. activation. Remove wand from sealed foil wr.apper immediately before Light wand shall be handled by cap end during testing. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55133 W 9999974 0320789 53T W - A-A
14、-5 5 13 3 e. Activation method: Bend; agitate for ten (10) seconds. f. Wands shall be agitated for ten (10) seconds before each reading. O g. Wands kept under cover or in darkness; may be exposed to light during movement to and from light meter. h. All meter readings made in darkness. i. Meter kept
15、at 75 degrees F for all tests. j. Temperature tolerances: plus or minus 2 F. . k. Holder, wand test fixture in accordance with DGSC drawing, DGSCV-91-03, Part Number 3. (Enclosure 1) 1. Chemiluminescent lights shall be held in a vertical position with cap end down when light output measurement is ma
16、de. m. Ageing Test - test condition to be added at a future date. Contractor certification. The contractor shall certify, and maintain objective quality evidence that the product offered to the Government meets the salient characteristics of this description and that the product conforms to the prod
17、ucers own drawings, specifications, standards, and quality assurance practices and is the same produced as the manufacturers current product offered by the preceding the solicitation. require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the
18、provisions of the contract. 0 contractor in the commercial marketplace for at least one year The Government reserves the right to Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, provided they fall within
19、 specified tolerances using conversion tables contained in the latest revision of Federal Standard No. 376, and all other requirements of this Commercial Item Description are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch-pound
20、 units, a request should be made to the contracting officer to determine if the product is acceptable. accepting or rejecting the product. The contracting officer has the option of 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-D 2 mC OH w ri W .
21、QIWN Incob u) Ob ri40 VI W H O 2 O E-c W u 2 w H nn ma ww FI E v1 U aa gg fan Cyd c3 +I !iu v1 4 +I EW W VI# WU 2: go fa U E W VIW W# WO #W W Ln +I on nd Cy c3 Q) 4 rd d O -4 m -4 3 n 3 E I 4 I E m 4 m a Q) a a 4 o) a O 3 td 4 m fa al rl a H m 4 Provided by IHSNot for ResaleNo reproduction or networ
22、king permitted without license from IHS-,-,-I I I I I I I I I I I I I I 1 1 1 I 1 i t I I t i i I i b I i I A-A-55133 m 9999974 0320791 398 W A-A- 55133 G W I- O z U FI W n I c L W FI 2 I- 3 o -F I 5 Enclosure 1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license fro
23、m IHS-,-,-_ A-A-55133 m 9999974 0320792 024 m A-A-55 13 3 Requlatory requirements. recovered materials in accordance with Public Law 94-580 to the maximum extent practicable. The offeror/contractor is encouraged to use puaiity assurance. Foil leakaqe. Samples will be tested for foil leakage by appli
24、cation of 6 psi air pressure into the inside of the foil wrap while submerged under water. A steady stream of air bubbles coming from any portion of the foil, except where the foil has been penetrated by the air supply shall be classified as an airtight foil failure. Shelf life. Each chemiluminescen
25、t light shall have a minimum of 46 months life remaining at the time of delivery to the Government and must have been manufactured within 6 months of the date of delivery to the Government. Fluid Level. The vertical fluid level, when measured from the exterior of the flat base shall be no less than
26、3 1/4 inches. Preservation, packaqinq, D ackinq, labelins, and markinq. be as specified in the contract or order. The preservation, packaging, packing, labeling, and marking shall Foil wrapping and all other packaging shall be marked with Foil wrapping shall be color coded and contain operating manu
27、facturers lot number and expiration date. instructions. CID based Part Identification Number. The following Part Identification Numbering procedure is for Government purposes and does not constitute a requirement for the contractor. A-A-55133-X G=WHITE 6 Provided by IHSNot for ResaleNo reproduction
28、or networking permitted without license from IHS-,-,-A-A-55133 m 9999974 0120793 Tb m A-A-55 13 3 Notes. Orderinq data. a. Title, number, part identification number with applicable Acquisition documents must specify the following: color code letter, and date of this document. b. Material Safety Data
29、 Sheet (MSDS) .shall be provided to Contracting Officer prior to award (FAR 52.233-3 and MSDS Page 2). c. Contracting Officer may request .proof of certification of commercial item prior to first contract delivery (See Contractor Certification, Page 3). MILITARY INTEREST: CIVIL AGENCY COORDINATING A
30、CTIVITY: MILITARY COORDINATING ACTIVITY: Custodians Navy-EC Air Force-99 Reviewinq Activities DLA-GS User Activities Navy-YD GSA-FSS PREPARING ACTIVITY: Navy-EC AGENT: DLA-GS PROJECT NO. 6260-1015 FSC 6260 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
