1、A-A-55L53 9999974 0163598 055 H A-A-55153 15 March 1994 COMMERCIAL ITEM DESCRIPTION CONNECTORS, ELECTRICAL, IEEE 488 COMPATIBLE, RECTANGULAR, MINIATURE, POLARIZED SHELL, PLUG AND RECEPTACLE, METRIC JACKSCREW The General Services Administration has authorized the use of this commercial item descripti
2、on (CID). Abstract. shell, plug or receptacle, electrical digital interface bus connector system. This connector hardware can be used in applications that require connectors which conform to the IEEE 488 interface standard. hardware covered by this CID is intended for commercial/industrial applicati
3、ons and may be used in military systems where individual environmental and performance requirements can be met. This CID covers the general requirements for metric jackscrew locking hardware for a polarized Connector Part or Identifying Number (PIN). The PIN for the CID shall be as shown in the foll
4、owing example: - A-A-55153 I o1 - I I I LI CID number Dash number Salient characteristi cs. Design, construction, and dimensions. Design, construction, and dimensions shall be as specified on figure 1 and in accordance with IEEE 488. Connector hardware materials. Metric jackscrew shall be of black o
5、xide plated carbon steel. Operating temperature. The operating temperature range shall be from -4OC to +75C. Vibration. The hardware, when assembled and locked to mating connectors, shall exhibit no evidence of breaking, cracking, or loosening of parts when subjected to vibration of 10-55-10 Hz trav
6、ersed in 1 minute at 1.52 millimeters (.O60 inch) total excursion for 2 hours in each of three mutually perpendicular planes. The hardware, when assembled and locked to mating connectors, shall exhibit no evidence O Physical shock. of breaking, cracking, or loosening of parts when subjected to 50 Gs
7、 half-sine wave shock of 11 milliseconds duration, 3 shocks in each direction applied along the three mutually perpendicular planes for a total of 18 shocks. Regulatory requirements. This section is not applicable to this CID. FSC 5935 DISTRIBUTION STATEMENT A. Approved for public release; distribut
8、ion is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55153 7999974 0363599 Til A-A-55153 34.2 1 7.90 mm 0.40 7.90 34.20 I -M3.5 x 0.6-69 INCH . O16 ,311 1.347 NOTES: 1. Dimensions are in millimeters. 2. Inch-Pound equivalents are sho
9、wn for information only. Figure 1. Connector, jackscrew. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5.5153 W 9999974 0363600 533 A-A-55153 Quality assurance provisions. Responsibility for inspection. Unless otherwise specified in the contr
10、act or purchase order, the contractor is responsible for the performance of all inspection, examination, and test requirements specified herein. his own or any other facilities suitable for the inspection requirements specified herein, unless disapproved by the Government. examinations, or tests set
11、 forth in this description where such inspections, examinations, and tests are deemed necessary to assure supplies and services conform to prescribed requirements. Except as otherwise specified in the contract or purchase order, the contractor may use The Government reserves the right to perform any
12、 of the inspections, Contractor certification statement. The contractor shall certify and maintain objective quality evidence that the product offered meets the requirements of this CID, and that the product conforms to the producers own drawings, specifications, standards, quality assurances practi
13、ces, and is the same as the product provided as a bid sample. the first delivery and thereafter as may be otherwise provided for under the provisions of the contract. The Government reserves the right to require proof of such conformance prior to Certificate of compliance. A certificate of complianc
14、e shall accompany all connector hardware supplied to this CID. Packaging. Preservation, packaging, packing, labeling, and marking. Preservation, packaging, labeling, and marking shall be as specified in the contract or purchase order. Notes. This section contains relevant information which is useful
15、 to buyers, users, and suppliers in the process of acquiring the item, but is not mandatory. Referenced document. Other Publication INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE) O IEEE 488 - IEEE Standard Digital Interface for Programmable Instrumentation. (Applications for copies should
16、be addressed to the Institute of Electrical and Electronics Engineers (IEEE), IEEE Service Center, 445 Hoes Lane, P.O. Box 1331, Piscataway, NJ 08855-1331.) Acquisition documents should specify the following: Ordering data. a. CID document number and revision and CID PIN. b. Quality assurance provis
17、ions. c. Packaging requirements. Comments. Comments on this CID should be directed to Defense Electronics Supply Center, 1507 Wilmington Pike, ATTN: DESC-EMT, Dayton, OH 45444-5000, or telephone (513) 296-5391. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license fr
18、om IHS-,-,-A-A-55153 9999974 OLb3bOL 47T 9 A-A-55153 Source of supply. they become available. A suggested source of supply is listed in table I. Additional sources will be added as TABLE I. Suggested source of supply. CID PIN A-A-55153- number 553489-1 00779 Vendor CAGE number 00779 Vendor name and address AMP, Incorporated 470 Friendship Road Harrisburg, PA 17111-1203 CIVIL AGENCY COORDINATING ACTIVITY: GSA - 7FXE PREPARING ACTIVITY: DLA-ES (Project 5935-0439) 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
