DLA A-A-59263 B-2011 BATTERY DRY BA-53.pdf

上传人:dealItalian200 文档编号:687207 上传时间:2018-12-30 格式:PDF 页数:6 大小:55.22KB
下载 相关 举报
DLA A-A-59263 B-2011 BATTERY DRY BA-53.pdf_第1页
第1页 / 共6页
DLA A-A-59263 B-2011 BATTERY DRY BA-53.pdf_第2页
第2页 / 共6页
DLA A-A-59263 B-2011 BATTERY DRY BA-53.pdf_第3页
第3页 / 共6页
DLA A-A-59263 B-2011 BATTERY DRY BA-53.pdf_第4页
第4页 / 共6页
DLA A-A-59263 B-2011 BATTERY DRY BA-53.pdf_第5页
第5页 / 共6页
点击查看更多>>
资源描述

1、Beneficial comments, recommendations, additions, deletions, clarifications, etc., and any data that may improve this document should be sent to: DLA Land and Maritime, Columbus, ATTN: VAT, P.O. Box 3990, Columbus, OH 43218-3990, or email mailto:CircuitProtectdscc.dla.mil. Since contact information c

2、an change you may want to verify the currency of the address information using the ASSIST Online database at https:/assist.daps.dla.mil. AMSC N/A FSC 6135 INCH-POUND A-A-59263B 15 October 2011 SUPERSEDING A-A-59263A 21 June 2006 COMMERCIAL ITEM DESCRIPTION BATTERY, DRY, BA-53 The General Services Ad

3、ministration has authorized the use of this commercial item description for all federal agencies. 1. SCOPE. This commercial item description (CID) covers the general requirements for a +22.5/45 V dc dry-cell battery. This battery is intended for use in test equipment, radio sets, and other portable

4、electronic, communication equipment powered by non-rechargeable dry cell batteries. 2. CLASSIFICATION/PART OR IDENTIFICATION NUMBER (PIN). This CID uses a classification system which is included in the Part or Identification Number (PIN). The PIN shall be AA59263 (see 7.1). 3. SALIENT CHARACTERISTIC

5、S. 3.1 Interface and physical dimensions. Batteries supplied to this CID shall be as specified herein and shall meet the requirements of NEMA C18.1M Part 1 (see figure 1). 3.2 Voltage. The battery shall provide a nominal voltage of +22.5 V dc and +45 V dc. 3.3 Weight. The battery weight shall not ex

6、ceed 1 pound 10 ounces. 3.4 Terminal type. The terminals for this battery shall be the stud and nut type consisting of a threaded stud and an insulated knurled nut with a brass insert. 3.5 Cell type. Cells shall meet the requirements of ANSI Number 15A, 15D, 15F or 15M of NEMA C18.1M, Part 1. 3.6 Di

7、mensions. The battery shall meet the dimensional requirements shown in figure 1. 3.7 Marking. Batteries supplied to this CID shall be marked with the manufacturers (MFRs) standard commercial PIN. (NOTE: The part number marked on the unit pack shall be the CID PIN.) 3.8 Recycled, recovered, or enviro

8、nmentally preferable materials. Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible provided that the material meets or exceeds the operational and maintenance requirements, and promotes economically advantageous life cycle costs. 3.9 Workmanshi

9、p. Batteries shall be processed in such a manner as to be uniform in quality and shall be free from other defects that will affect life, serviceability, or appearance. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59263B 2 FIGURE 1. Interface a

10、nd physical dimensions. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59263B 3 Ltr Inches mm Min Max Min Max A 4.500 4.626 114.30 117.49 B - 5.219 - 132.56 C 0.562 0.688 14.27 17.48 D 1.437 1.563 36.50 39.70 E 2.312 2.438 58.72 61.93 F 2.937 3.

11、063 74.60 77.80 G 0.687 0.813 17.45 20.65 H 1.812 1.938 46.02 49.23 NOTES: 1. Dimensions are in Inches. 2. Unless otherwise specified, tolerance is .063 inch (1.59 mm). FIGURE 1. Interface and physical dimensions - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted witho

12、ut license from IHS-,-,-A-A-59263B 4 4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with 23.403 of the Federal Acquisition Regulation (FAR). 5. PRODUCT CONFORMANCE PROVISIONS. 5.1 Product conformance. The p

13、roducts provided shall meet the salient characteristics of this CID, conform to the producers own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such confor

14、mance. 6. PACKAGING. Preservation, packing, and marking shall be as specified in the contract or order. 7. NOTES. 7.1 PIN. The PIN should be used for Government purposes to buy commercial products to this CID. See section 2 for PIN format example. 7.2 Environmentally preferable material. Environment

15、ally preferable materials should be used to the maximum extent possible to meet the requirements of this specification. As of the dating of this document, the U.S. Environmentally Protection Agency (EPA) is focusing efforts on reducing 31 priority chemicals. The list of chemicals and additional info

16、rmation is available on their website http:/www.epa.gov/osw/hazard/wastemin/priority.htm. Included in the EPA list of 31 priority chemicals are cadmium, lead, and mercury. Use of these materials on the list should be minimized or eliminated unless needed to meet the requirements specified herein (se

17、e Section 3). 7.3 Commercial and Government Entity (CAGE) code. For ordering purposes, inventory control, and submission of these batteries to DLA Land and Maritime under the Military Parts Control Advisory Group (MPCAG) evaluation program, CAGE code 58536 should be used. 7.4 Source of documents. FE

18、DERAL REGULATIONS FAR - Federal Acquisition Regulations (FAR). (Copies of this document are available online at http:/www.acquisition.gov/comp/far/index.html from the U.S. Government Printing Office, 732 North Capital Street, NW, Washington D.C. 20401-0001.) Other Publications NATIONAL ELECTRICAL MA

19、NUFACTURERS ASSOCIATION (NEMA) NEMA C18.1M PART 1 - Portable Primary Cells and Batteries with Aqueous Electrolyte. (Copies of this document are available online at http:/www.nema.org/ or from the National Electrical Manufacturers Association, 1300 North 17thStreet, Rosslyn, Virginia 22209-3811). (In

20、dustry association specifications and standards are generally available for reference from libraries. They are also distributed among technical groups and using Federal agencies.) 7.5 Ordering data. The contract or order should specify the following: a. CID document number, revision, and CID PIN. b.

21、 Product conformance provisions. c. Packaging requirements. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59263B 5 7.6 Commercial products. As part of the market analysis and research effort, this CID was coordinated with the following manufact

22、urers of commercial products. At the time of CID preparation and coordination, these manufacturers were known to have commercial products that would meet the requirements of this CID. (NOTE: This information should not be considered as a list of approved manufacturers or be used to restrict acquisit

23、ion to only the manufacturers shown.) MFRs CAGE MFRs name and address 51828 Bren-Tronics Incorporated 10 Brayton Court Commack, NY 11725-3197 Phone number: (631) 499-5155 Facsimile number (631) 499-5504 E-mail: mailto: Uniform Resource Locator (URL): 7.7 Part number (P/N) supersession data. These C

24、ID PINs supersede the following MFRs P/Ns as shown. This information is being provided to assist in reducing proliferation in the Government inventory system. TABLE II. P/N supersession data. CID PIN MFRs P/N 1/ CAGE 51828 AA59263 BT-70653 1/ The manufacturers P/N shall not be used for acquisition t

25、o the requirements of this CID. At the time of preparation of this CID, the aforementioned commercial products were reviewed and could be replaced by the CID PIN shown. For actual part marking requirements see 3.7. 7.8 Government users. To acquire information on obtaining these batteries from the Go

26、vernment inventory system, contact DLA Land and Maritime, ATTN: FLC, Post Office Box 3990, Columbus, OH 43218-3990, or telephone (614) 692-3342. 7.8.1 National stock number (NSN). The following is a list of NSNs assigned which correspond to this CID. The list is for information only and may not be i

27、ndicative of all possible NSNs associated with the CID. For up to date information on assigned NSNs, please contact the aforementioned DLA Land and Maritime office (see 7.7). TABLE III. NSNs. CID PIN (see section 2) NSN AA59263 6135-00-120-1004 7.9 Changes from previous issue. Marginal notations are

28、 not used in this revision to identify changes with respect to the previous issue due to the extensiveness of the changes. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59263B 6 MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: GSA - FAS

29、Custodians: Army - CR Preparing activity: Navy - SH Air Force - 99 DLA - CC DLA - CC Project 6135-2011-006 Review Activities: Navy - MC NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • ASTM D6239-2009(2015) 1947 Standard Test Method for Uranium in Drinking Water by High-Resolution Alpha-Liquid-Scintillation Spectrometry《采用高分辨α液体闪烁谱测量法的饮用水中铀的标准试验方法》.pdf ASTM D6239-2009(2015) 1947 Standard Test Method for Uranium in Drinking Water by High-Resolution Alpha-Liquid-Scintillation Spectrometry《采用高分辨α液体闪烁谱测量法的饮用水中铀的标准试验方法》.pdf
  • ASTM D6240 D6240M-2012 red 2390 Standard Tables of Body Measurements for Mature Men ages 35 and older Sizes Thirty-Four to Fifty-Two (34 to 52) Short Regular and Tall《对用于年龄为35岁及以上 .pdf ASTM D6240 D6240M-2012 red 2390 Standard Tables of Body Measurements for Mature Men ages 35 and older Sizes Thirty-Four to Fifty-Two (34 to 52) Short Regular and Tall《对用于年龄为35岁及以上 .pdf
  • ASTM D6240 D6240M-2012e1 6250 Standard Tables of Body Measurements for Mature Men ages 35 and older Sizes Thirty-Four to Fifty-Two (34 to 52) Short Regular and Tall《对用于年龄为35岁及以上 身高.pdf ASTM D6240 D6240M-2012e1 6250 Standard Tables of Body Measurements for Mature Men ages 35 and older Sizes Thirty-Four to Fifty-Two (34 to 52) Short Regular and Tall《对用于年龄为35岁及以上 身高.pdf
  • ASTM D6240-1998(2006) Standard Tables of Body Measurements for Men Sizes Thirty-Four to Sixty (34 to 60) Regular《尺寸为34至60的男性身体测量的标准表》.pdf ASTM D6240-1998(2006) Standard Tables of Body Measurements for Men Sizes Thirty-Four to Sixty (34 to 60) Regular《尺寸为34至60的男性身体测量的标准表》.pdf
  • ASTM D6241-2004 Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe《用50mm探针对土工织物和土工织物相关产品的静态穿透强度的标准试验方法》.pdf ASTM D6241-2004 Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe《用50mm探针对土工织物和土工织物相关产品的静态穿透强度的标准试验方法》.pdf
  • ASTM D6241-2004(2009) 317 Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe《用50mm探针对土工织物和土工织物相关产品的静态穿透强度的标准试验.pdf ASTM D6241-2004(2009) 317 Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe《用50mm探针对土工织物和土工织物相关产品的静态穿透强度的标准试验.pdf
  • ASTM D6241-2004(2009)e1 4775 Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe《采用50mm探针对土工织物和土工织物相关产品的静态穿透强度的.pdf ASTM D6241-2004(2009)e1 4775 Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe《采用50mm探针对土工织物和土工织物相关产品的静态穿透强度的.pdf
  • ASTM D6241-2014 red 8237 Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe《用50 mm探针对土工织物和土工织物相关产品的静态穿透强度的标准试验方法》.pdf ASTM D6241-2014 red 8237 Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe《用50 mm探针对土工织物和土工织物相关产品的静态穿透强度的标准试验方法》.pdf
  • ASTM D6243 D6243M-2013a red 2397 Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method《采用直接剪切方法测定土工.pdf ASTM D6243 D6243M-2013a red 2397 Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method《采用直接剪切方法测定土工.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1