1、 INCH-POUND A-A-59606/1A 4 September 2013 SUPERSEDING A-A-59606/1 23 August 2002 COMMERCIAL ITEM DESCRIPTION SPECIFICATION SHEET BLADE, WINDSHIELD WIPER, LIGHT DUTY (CLASS A) The General Services Administration has authorized the use of this commercial item description for all federal agencies. The
2、complete requirements for procuring the light duty, windshield wiper blades described herein shall consist of this document and the issue in effect of A-A-59606. CLASSIFICATION/PART OR IDENTIFICATION NUMBER (PIN). This commercial item description (CID) specification sheet uses a classification syste
3、m which is included in the PIN as shown in the following example (see NOTES). AA59606/1 -XX -X R CID number and applicable CID specification sheet Dash number (see table I) Style - 1 Flat blade Style 2 - Curved blade (one digit) Wiper blade refills (if applicable) SALIENT CHARACTERISTICS. Interface
4、and physical dimensions. Light duty, windshield wiper blades supplied to this CID specification sheet shall be as specified herein (see figure 1 and table I). AMSC N/A FSC 2540 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59606/1A 2 .190.500 .
5、062L .062.500 .062NOTES: 1. Cross section of element, channel and clip optional. 2. Dimensions are in inches. 3. Unless otherwise specified tolerances are .01 decimals. FIGURE 1. Wiper blade dimensions. TABLE I. Dash codes. Dash number Length, in (cm) -07 7.250 (18.415) -08 8.250 (20.955) -09 9 (22.
6、86) -10 10 (25.4) -11 11 (27.94) -12 12 (30.48) -13 13 (33.02) -15 15 (38.1) -16 16 (40.64) NOTES. PIN. The PIN should be used for Government purposes to buy commercial products to this CID specification sheet. See classification information for PIN format example. Source of documents. COMMERCIAL IT
7、EM DESCRIPTIONS A-A-59606 - Arm, Windshield Wiper: Blade, Windshield Wiper: and Blade Refill, Windshield Wiper. (Copies of these documents are available online at http:/quicksearch.dla.mil/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.
8、) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59606/1A 3 Commercial products. As part of the market analysis and research effort, this CID specification sheet was coordinated with the following manufacturers of commercial products. At the tim
9、e of CID specification sheet preparation and coordination, these manufacturers were known to have commercial products that would meet the requirements of this CID specification sheet. (NOTE: This information should not be considered as a list of approved manufacturers or be used to restrict procurem
10、ent to only the manufacturers shown.) MFRs CAGE MFRs name and address 70412 Federal Mogul Wiper Products (Formerly ANCO Division - Cooper Industries) 26555 Northwestern Highway Southfield, MI 48033 (248) 354-7700 60703 Trico Products Co. 3255 W. Hamlin Rd. Rochester Hill, MI (956) 544-2722 Part num
11、ber (P/N) supersession data. These CID specification sheet PINs supersede the following manufacturers P/Ns as shown. This information is being provided to assist in reducing proliferation in the Government inventory system (see table II). TABLE II. P/N supersession data. CID PIN (see table I) MFRs C
12、AGE MFRs P/N 1/ AA59606/1-07-X 60703 L778-28ZZ/ZP/ZT AA59606/1-10-X 12204 None AA59606/1-12-X 60703 58972 L778-42EC 4212 AA59606/1-13-2 23040 B8SZ17528A B8SZ17528B B9AB17528A C0AB17528C C1AB17528B C1AZ17528B C3TZ17528A 70412 32153 35001-59 35003-59 820 24617 1181221 3748734 3819072 Provided by IHSNo
13、t for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59606/1A 4 TABLE II. P/N data - Continued. CID PIN (see table I) MFRs CAGE MFRs P/N 1/ AA59606/1-13-2 24617 3832585 530382 AA59606/1-13-2R 60703 RF13 70412 6013 04450 613 60703 LP13 70412 12-13 86403 2291909 73370 3
14、3013 04450 613A 08081 660 AA59606/1-13-2 60703 38-130 71862 3941970 93219 1362726 11862 12338593 AA59606/1-15-2R 23040 C3AZ-17593B 60703 LP15 12204 2771967 70412 680 60703 RF15 70412 6015 04450 615 AA59606/1-15-2 60703 PR152W/815 70412 PS32015-59 12204 2770123 73370 34015 24617 3888296 AA59606/1-15-
15、2 86403 WB000015 4186978 AA59606/1-16-2 60703 PRL16-2 PR16 11962 3951910 70412 816 826 11862 9673995 9883584 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59606/1A 5 TABLE II. P/N data - Continued. CID PIN (see table I) MFRs CAGE MFRs P/N 1/ AA
16、59606/1-16-2R 23040 D3DZ17593A D5FZ17593A E3AZ17593C WV16 12204 MB415742 2857904 60703 RF16 RF16-1 41-160 11862 12309714 14089144 14095515 20712505 70412 6016 04450 616 1/ The manufacturers P/N shall not be used for procurement to the requirements of this CID. At the time of preparation of this CID,
17、 the aforementioned commercial products were reviewed and could be replaced by the CID PIN shown. For actual part marking requirements see CID A-A-59606. Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue, due to the e
18、xtent of the changes. MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: GSA-FSS Custodians: Preparing activity: Army - AT DLA - CC Navy - MC Air Force - 99 (Project 2540-2013-002) DLA - CC Review activities: Navy - SA Air Force - 84 NOTE: The activities listed above were interested in this doc
19、ument as the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
