1、 AMSC N/A FSC 8465 A-A-59936 23 September 2013 COMMERCIAL ITEM DESCRIPTION ARMY MOUNTAINEERING KIT (AMK) ROPE MAINTENANCE REPLACEMENT KIT The General Services Administration has authorized the use of this commercial item description for all Federal agencies. 1. SCOPE. This Commercial Item Descriptio
2、n (CID) covers the requirements for a kit that replaces unserviceable rope maintenance items that are issued in the Army Mountaineering Kit (AMKs) specifically the High Angle Mountaineering Kit (HAMK) (A-A-59869). 2. CLASSIFICATION. The Army Mountaineering Kit (AMK) Rope Maintenance Replacement Kit
3、will be furnished as one kit. 3. SALIENT CHARACTERISTICS. The Kit shall be composed of the following items in the following quantities as listed in Table I: TABLE I. List of items in Kit Comments, suggestions, or questions on this document should be addressed to: Attn: DLA Troop Support, Standardiza
4、tion Team, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Since contact information can change, you may want to verify the currency of this address information using Acquisition Streamlining and Standardization Information System (ASSIST) online database at https:/assist.dla.mil. Item Name CID Ite
5、m Type Quantity Rope, Cutter Electric A-A-59859 - 1 Washer, Rope A-A-59851 - 1 Carabiner A-A-59836 X 1 METRIC Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59936 2 3.1 Dimensions. Individual item dimensions shall be in accordance with drawings
6、and specification requirements specified in the applicable CID document (see Table I) unless item is a manufacturers part number/cage code then, in which manufacturers current specifications apply. 3.2 Color. Individual item colors will be in accordance with applicable specifications. 3.3 End item t
7、esting. Individual item test standards shall be in accordance with their related International Climbing and Mountaineering Federation Standards, where applicable. 3.4 Materials. Individual item materials shall be in accordance with applicable specifications. 3.5 Workmanship. The AMK Rope Maintenance
8、 Replacement Kit shall conform to the quality of product established by this document. The occurrence of defects shall not exceed the contractors own quality assurance standards and the quality assurance standards defined in the technical data in the solicitation and/or contract. 3.6 Service life. T
9、he AMK Rope Maintenance Replacement Kit shall have no unexpected material or component failures during a continuous one-year cycle. The AMK Rope Maintenance Replacement Kit shall have no unexpected material or component failures during periodic use over a five (5) year period. 3.7 Labels/barcoding/i
10、nstruction slip. If applicable, all labeling, barcoding and instruction slip requirements shall be as specified in the solicitation or contract (see 7.2). 3.7.1 Labels. Each Army Mountaineering Kit (AMK) Rope Maintenance Replacement Kit shall have identification label Class 5 conforming to Type VI o
11、f MIL-DTL-32075. The color of the label shall be white. The following information shall be included in the printing for the identification label: ARMY MOUNTAINEERING KIT (AMK) ROPE MANTENANCE REPLACEMENT KIT NSN: XXXX-XX-XXX-XXXX The following instruction information shall be supplied: a. The name o
12、r trademark of the manufacturer, importer or supplier b. The meaning of any marking on the product c. The use of the product d. How to choose other components for use in the system e. How to maintain and service the product f. The lifespan of the product or how to access it g. The effects of chemica
13、l reagents and temperature on the product h. The effects of storing and aging i. Identification of the model, if more than one model is available Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59936 3 4. REGULATORY REQUIREMENTS. The offeror/cont
14、ractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 4.1 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environmentally preferable materials should be
15、 used to the maximum extent possible, provided that the material meets or exceeds the operational and maintenance requirements and promotes economically advantageous life cycle costs. 5. PRODUCT CONFORMANCE PROVISIONS. 5.1 Product conformance. The products provided shall meet the salient characteris
16、tics of this Commercial Item Description, conform to the producers own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial marketplace. The Government reserves the right to require proof of such conformance. 5.2 End item ex
17、amination. Each kit shall be examined for the following defects as listed in Table II: TABLE II. End item examination Examine Defect Description Components Missing components Incorrect item, size, type or color 5.3 Acceptance criteria. Acceptance criteria shall be as specified in the contract or pur
18、chase order (see 7.2). 6. PACKAGING. 6.1 Preservation, packing and marking. The preservation, packing and marking shall be as specified in the contract or order (see 7.2) and as below. 7. NOTES. 7.1 Sources of Government documents. 7.1.1 Copies of Government documents are available online at https:/
19、assist.dla.mil/quicksearch/ or from the Standardization Documents Order Desk, Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. 7.1.2 Federal Acquisition Regulations are available online at http:/acquisition.gov/far/index.html or by contacting the Superintendent of Documents at 202-512-1
20、800. 7.2 Ordering data. The contract or order should specify the following: Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59936 4 a. Title, number, and date of this Commercial Item Description. b. When required, labeling, barcoding and instruct
21、ion slip (see 3.7) c. Acceptance criteria (see 5.3) d. Packaging (see 6.1) 7.3 National Stock Numbers (NSNs). The following is a list of NSNs and Types associated for Type I through Type V, to determine the required items for the replacement kit that corresponds to A-A-59859 Rope Cutter, Electric, A
22、-A-59851 Washer Rope and A-A-59836 Carabiner, listed below: NSNs TYPE ITEM 4940-01-582-8347 - Rope Cutter, Electric 4940-01-582-5658 - Washer, Rope 8465-01-578-8906 X Carabiner 7.4 Key words. Climbing MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: Custodians: GSA-FSS Army GL Navy -MC PREPAR
23、ING ACTIVITY: DLA-CT Project Number: 8465-2013-003 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
