1、REVISIONS LTR DESCRIPTION DATE APPROVED A Update references, technical date, contact information, distribution statement. 24 April 2008 Abdonasser Abdouni B Updated Vendor PINs. 30 July 2009 Abdonasser Abdouni Prepared in accordance with ASME Y14.100 Source control drawing REV PAGE REV STATUS OF PAG
2、ES REV B A A B PAGE 1 2 3 4 PMIC N/A PREPARED BY DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43218-3990 Ron Gary Original date of drawing 20 April 2001 CHECKED BY TITLE Lee Surowiec CONNECTOR, RECEPTACLE, ELECTRICAL, RF, SERIES N, JAMNUT, FOR LOW SMOKE CABLES APPROVED BY Rob Heber SIZE CAGE CODE
3、DWG. NO. 01006 A 037Z3 REV B PAGE 1 OF 4 AMSC N/A 5935-E832-003 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DWG NO. A 037Z3 01006 REV A PAGE 2 NOTES: 1. Dimensions are in inch
4、es; metric equivalents are in parentheses. 2. Metric equivalents are given for reference purposes only. 3. All undimensioned pictorial configurations are for reference purposes only. 4. Series N, socket contact interface, in accordance with MIL-STD-348. 5. Wrench flats to accommodate standard wrench
5、 openings in accordance with FED-STD-H28, appendix 10. FIGURE 1. General configuration. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DWG NO. A 037Z3 01006 REV A PAGE 3 ENGINEER
6、ING DATA: This document covers the requirements for radio frequency connectors accommodating special low smoke coaxial cables. REQUIREMENTS: These connectors shall conform to all the requirements of the latest issue of DSCC drawing 84148, figure 1 herein, and MIL-PRF 39012/3, and accommodate the cab
7、les listed in table I, with the following additions and exceptions. Electrical: Shall be in accordance with MIL-PRF-39012/3. Mechanical: Shall be in accordance with MIL-PRF-39012/3. Environmental: Shall be in accordance with MIL-PRF-39012/3. TABLE I. Cable accommodation. Part or Identifying Number (
8、PIN) 1/ 2/ Applicable cable 01006NBSA M17/220-00001 01006NBSB # M17/221-00001 01006NBSC & M17/222-00001 01006NBSD $ M17/223-00001 01006NBSE % M17/224-00001 01006NBSF M17/225-00001 1/ These connectors have captivated center contacts. 2/ These connectors are assembled using the MIL-C-22520/5 crimp too
9、l and using the following crimp dies: M22520/5-05 # M22520/5-07 & M22520/5-29 $ M22520/5-25 % M22520/5-27 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DWG NO. A 037Z3 01006 REV
10、 B PAGE 4 Approved sources of supply. Approved sources of supply are listed herein. Additional sources will be added as they become available. The vendors listed below have agreed to this drawing and a certificate of compliance has been submitted to Defense Supply Center Columbus, ATTN: DSCC-VAI, P.
11、O. Box 3990, Columbus, OH 43218-3990 or emailed to RFConnectordla.mil . DSCC drawing PIN Vendor similar PIN 1/ Vendor CAGE number 01006NBSA (3190-850) Superseded by 1119320A721-001 00795 01006NBSB (3190-1150) Superseded by 1119311A721-001 01006NBSC (3190-1176) Superseded by 1119348A721-001 01006NBSD
12、 (3190-1079) Superseded by 1119300A721-003 01006NBSE (3190-1198) Superseded by 1119318A721-000 01006NBSF (3190-1087) Superseded by 1119319A721-006 1/ Parts must be purchased to this DSCC PIN to assure all performance requirements and test are met. Vendor CAGE Vendor name number and address 00795 Delta Electronics 416 Cabot Street Beverly, MA 01915 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
