1、 REVISIONS LTR DESCRIPTION DATE APPROVED A Update drawing to new format 08 July 2005 R. L. Taylor Prepared in accordance with ASME-Y14.100 REV PAGE REV A A REV STATUS OF PAGES PAGE 1 2 PREPARED BY PMIC N/A DEFENSE ELECTRONICS SUPPLY CENTER, DAYTON, OHIO 45444-5000 CHECKED BY TITLE APPROVED BY METERS
2、 ELECTRICAL, INDICATING SIZE CAGE CODE 14933 DWG. NO. A80007 Original date of drawing 16 June 1980 A REV PAGE 1 OF 2 THIS DRAWING WAS REVIEWED ON 08 July 2005 AND IS VALID FOR ACQUISITION. CURRENT DESIGN ACTIVITY CAGE CODE 037Z3 DEFENSE LOGISTICS AGENCY DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO
3、 43218-3990 AMSC N/A 6625-E038 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. * 1. REQUIREMENTS * 1.1 METER SHALL BE MR13W001DCMAR PER MIL-M-10304/24 EXCEPT FOR SCALE MARKING. * 1.1.1 BACKGROUND WHITE * 1.1.2 SCALE ARC SHALL B
4、E 90 NOMINAL. 1.1.3 ARC SEPARATING SCALES TO BE .03 INCH WIDE BLACK * 1.1.4 SCALE BELOW ARC TO BE RED WITH MAJOR INDEX MARKS .020 INCH WIDE AND .10 INCH LONG. INTERMEDIATE INDEX MARKS TO BE .015 INCH WIDE AND .05 INCH LONG. NUMERALS BELOW RED SCALE TO BE .085 INCH HIGH BLACK - 0, 1, 2, 3 * 1.1.5 SCA
5、LE ABOVE ARC TO BE BLACK WITH MAJOR INDEX MARKS .020 INCH WIDE AND .10 INCH LONG. INTERMEDIATE INDEX MARKS TO BE .010 INCH WIDE AND .05 INCH LONG. NUMERALS ABOVE SCALE TO BE .085 INCH HIGH BLACK 0, 50, 100, 150. * 1.1.6 GREEN BLOCK REPRESENTS 10% OF FULL SCALE. CENTER OF GREEN BLOCK IS CENTER OF MET
6、ER SCALE. * 1.1.7 METER POINTER SHALL NOT EXCEED .020 INCH IN WIDTH. POINTER LENGTH SHALL EXTEND TO THE TOP OF MAJOR INDEX ON UPPER SCALE. * ADDED ESD SY. Item identification: The complete requirements for procuring the item described herein shall consist of this drawing and the latest issue of MIL-M-10304/24 14933 A80007 DEFENSE ELECTRONICS SUPPLY CENTER, DAYTON, OHIO 45444-5000 A REVPAGE2 Procure from sources on QPL Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
