1、REVISIONSLTR DESCRIPTION DATE APPROVEDA Add source 00795. Format changes. 27 Mar 1990 Randy LarsonB Delete source 98291. Editorial changes throughout. 7 Oct 1991 Randy LarsonC Incorporate NOR. 10 Nov 1994 Randy LarsonD Part number and source update. Editorial changes throughout. 14 June 2001 Robert
2、HeberPrepared in accordance with MIL-STD-100REVPAGEREVDDDDDREV STATUSOF PAGES PAGE 12345PREPARED BYPMIC GRon GaryDEFENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OHIO 43216-5000CHECKED BY TITLEC. W. KoellerAPPROVED BYRandy LarsonCONNECTOR PLUG, ELECTRICAL, RADIO REQUENCY,SERIES N, SOCKET CONTACT, FOR SEMIRI
3、GID CABLESIZE CAGE CODE037Z3DWG. NO.89008Original date ofdrawing3 Mar 1989AREV D PAGE 1 OF 5AMSC N/A 5935-E641-06DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZECAGE
4、 CODE DWG NO.037Z3 89008DEFENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OH 43216-5000AREVDPAGE2Inches mm.781 19.841.10 27.9NOTES:1. Dimensions are in inches.2. Metric equivalents are given for general information only.3. Wrench flats to accommodate standard wrench opening in accordance with FED-STD-H28, ap
5、pendix 10.4. All undimensioned pictorial configurations are for reference purpose only.5. For gold plated connectors, the gold plating shall be applied at least in the area of solder attachment.FIGURE 1. General configuration.Provided by IHSNot for ResaleNo reproduction or networking permitted witho
6、ut license from IHS-,-,-SIZECAGE CODE DWG NO.037Z3 89008DEFENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OH 43216-5000AREVDPAGE3ENGINEERING DATA:Nominal impedance: 50 ohms.Frequency range: DC to 18 GHz.Voltage rating: 500 volts rms maximum at sea level;125 volts rms at 70,000 feet.Temperature rating: -65C t
7、o +165C.REQUIREMENTS: (The requirements of DSCC drawing 84148 are applicable.)Dimensions and configurations: See figure 1 herein and MIL-STD-348.Force to engage and disengage: 3 inch-pounds maximum torque.Coupling proof torque: Not applicable.Inspection conditions: For each test of threaded coupling
8、 connector where the test is performed on mated pairs, thepairs shall be torqued to 12 to 15 inch-pounds.Hermetic seal: Not applicable.Leakage: Not applicable.Insulation resistance: MIL-STD-202, test condition B of method 302; 5,000 megohms, minimum.Center contact retention: 15 pounds minimum axial
9、force.Corrosion (salt spray): MIL-STD-202, test condition B of method 101.Voltage standing wave ratio (VSWR): From 500 MHz to 18 GHz, or approximately 80 percent of the upper cutofffrequency of the cable, whichever is lower, 1.06 + .007 (F) maximum.Connector durability: 500 cycles minimum at 12 cycl
10、es per minute maximum. The connector shall meet the matingcharacteristics and force to engage and disengage requirements.Contact resistance ( in milliohms maximum):Initial After environmentalCenter contact: 1.5 1.5Outer contact: 2.0 N/AOuter cable conductor to body: 2.0 N/ADielectric withstanding vo
11、ltage: 2,500 V rms, in accordance with MIL-STD-202, method 301, minimum at sea level.Vibration, high frequency: MIL-STD-202, test condition D of method 204, except the method of mounting shall beapproved by the qualifying activity. No discontinuity shall be permitted.Shock: MIL-STD-202, test conditi
12、on I of method 213.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZECAGE CODE DWG NO.037Z3 89008DEFENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OH 43216-5000AREVDPAGE4Thermal shock: MIL-STD-202, test condition B of method 107 except test high temperature
13、 shall be +200C.Moisture resistance: Method 106 of MIL-STD-202. No measurements shall be taken at high humidity. Insulationresistance shall be at least 200 megohms within 5 minutes after removal from humidity chamber.Corona level:500 V rms at 70,000 feet (M17/129-RG401).375 V rms at 70,000 feet (M17
14、/130-RG402).RF high potential withstanding voltage: 1,500 V rms, minimum.Frequency: 5 to 7.5 MHz.Leakage current: Not applicable.Cable Force TorqueM17/129-RG401 90 pounds (min) 70 inch-ounce (min)M17/130-RG402 60 pounds (min) 55 Inch-ounce (min)Coupling mechanism retention force: Not applicable.RF l
15、eakage: -(95-F GHz) dB, minimum.RF insertion loss: 0.05 f(GHz), dB maximum.Part or Identifying Number (PIN): See table I.TABLE I. PIN to cable accommodation.Connector PIN1/Cable89008NSGA M17/130-RG40289008NSGB M17/129-RG4012/1/ Connectors shall accommodate allcables referenced in this drawing.2/ Not
16、 to be assembled by solder.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZECAGE CODE DWG NO.037Z3 89008DEFENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OH 43216-5000AREVDPAGE5Approved sources of supply. Approved sources of supply are listed herein. Addit
17、ional sources will be added as theybecome available. The vendors listed herein have agreed to this drawing and a certificate of compliance has beensubmitted to DSCC-VAI.DSCC drawingPIN1/VendorCAGENumberVendorreferencePIN89008NSGA 0079564639950771108031G003-001HFPNJ-078-090-306520-690189008NSGB 00795
18、950771108050G000-0016520-69021/ Parts must be purchased to this DSCC PIN to assure thatall performance requirements and tests are met.Vender CAGE Vendor namenumber and address00795 Delta Electronics416 Cabot StreetBeverly, MA 0198564639 Micro-Coax IncorporatedBox E245 West 5thAvenueCollegeville, PA 1942695077 Solitron/Vector Microwave Products3301 Electronics WayWest Palm Beach, FL 33407Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
