1、REVISIONS LTR DESCRIPTION DATE APPROVED A Update format. Correcting references. Correcting address list of sources. 16 July 02 Robert Heber Prepared in accordance with ASME Y14.100 REV PAGE REV A A A A A REV STATUS OF PAGES PAGE 1 2 3 4 5 PMIC N/A PREPARED BY Jeffery Tunstall DEFENSE SUPPLY CENTER,
2、COLUMBUS COLUMBUS, OHIO 43216-5000 CHECKED BY Abdo Abdouni APPROVED BY Robert Heber TITLE CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, STRAIGHT, INDIVIDUAL AND /OR OVERALL SHIELD TERMINATION, CATEGORY 1A (FOR MIL-DTL-83723 SERIES III, MIL-C-5015 CRIMP, SAE-AS81703 SERIES III, AND MIL
3、C-26482 SERIES II) SIZE CAGE CODE 037Z3 DWG. NO. 93036 Original date of drawing 14 November 1994 A REV A PAGE 1 OF 5 AMSC N/A 5935-E676 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without lice
4、nse from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 93036 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV A PAGE 2 FIGURE 1. Dimensions and configuration. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 93036 DEFE
5、NSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV A PAGE 3 For connectors shell size (ref) Accessory shell size SAE-AS81703 series III MIL-C-26482 series II and MIL-C-83723 MIL-C-5015 crimp A max dia 03 3 - - - - - - 19.6 (.77) 08 - - - 8 8S 16.5 (.65) 10 - - - 10 10S, 10SL 19.6 (.77) 12 7 1
6、2 12S, 12 22.6 (.89) 14 12 14 14S, 14 25.9 (1.02) 16 19 16 16S, 16 29.2 (1.15) 18 27 18 18 31.2 (1.23) 20 37 20 20 34.5 (1.36) 22 - - - 22 22 37.6 (1.48) 24 - - - 24 24 40.6 (1.60) 28 - - - - - - 28 50.0 (1.97) 32 - - - - - - 32 56.4 (2.22) 36 - - - - - - 36 62.7 (2.47) 40 - - - - - - 40 69.1 (2.72)
7、 44 - - - - - - 44 75.4 (2.97) 48 - - - - - - 48 81.8 (3.22) 61 61 - - - - - - 42.4 (1.67) Cable accommodation range Clamp size Min Max B max K max N max 01 3.99 (.157) 5.33 (.210) 19.30 (.760) 21.4 (.84) 16.0 (.63) 02 4.75 (.187) 7.92 (.312) 19.30 (.760) 23.0 (.91) 19.2 (.76) 03 7.10(.281) 11.13 (.
8、438) 19.30 (.760) 27.8 (1.09) 23.9 (.94) 04 9.83 (.387) 14.28(.562) 19.30 (.760) 30.01 (1.19) 27.1 (1.07) 05 10.80 (.425) 15.87.625) 19.30 (.760) 32.5 (1.28) 30.3 (1.19) 06 14.61 (.575) 19.05 (.750) 19.30 (.760) 38.1 (1.50) 35.1 (1.38) 07 17.78 (.70) 23.82 (.938) 27.30 (1.073) 43.7 (1.72) 39.0 (1.54
9、) 08 22.53 (.887) 31.75 (1.250) 33.60 (1.323) 52.4 (2.06) 46.9 (1.85) 09 30.48 (1.20) 34.92 (1.375) 33.60 (1.323) 58.7 (2.31) 57.3 (2.26) 10 33.66(1.325) 41.28 (1.625) 39.93 (1.572) 69.1 (2.72) 63.8 (2.51) 11 40.01(1.575) 47.62 (1.875) 39.93 (1.572) 75.4 (2.97) 70.0 (2.76) NOTES: 1. Dimensions are i
10、n millimeters. Inch-pound equivalents are in parentheses. 2. Dimensions apply after plating. 3. The U.S. Government preferred system of measurements is the metric SI system. However, this item was originally using inch-pound units of measurement, in the event of conflict between the metric and inch-
11、pound units, the inch-pound units shall take precedence. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 93036 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV A PAGE 4 FIGURE 1. Dimensions and configuration
12、Continued. REQUIREMENTS: Shall be in accordance with MIL-C-85049, category 1A. Backshell shall be capable of terminating individual and/or overall shields or double overall shields and provide an environmental seal. Design and construction: See figure 1. Interface dimensions shall confirm to MIL-C-8
13、5049, accessory intermateability data for MIL-C-5015 crimp, MIL-C-26482 series II, SAE-AS81703 series III, and MIL-DTL-83723 series III connectors. Material: Accessory components: Aluminum alloy shall be in accordance with MIL-C-85049. O-ring and grommet: Shall be in accordance with MIL-C-85049. Fin
14、ish: N and W shall be in accordance with MIL-C-85049. Finish N is for space application only. Part or Identifying Number (PIN): The PIN shall be in accordance with the following: Example: 93036- W 11 C 2 - 05 Drawing number Finish Shell size (see figure 1) Strain relief style Accessory length 12.7 m
15、m 6.4 mm (0.50 inch .25) increments: e.g., 6 = 76.2 mm (3.0 inches). 2 = 25.4 mm (1.0 inch) minimum length. Cable accommodation range Marking: Marking shall be in accordance with MIL-C-85049 except the PIN shall be as stated above. Provided by IHSNot for ResaleNo reproduction or networking permitted
16、 without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 93036 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV A PAGE 5 QUALIFICATION: Qualification inspection: Qualification inspection for the adapter specified herein shall not be required. Qualification conformance inspection: Shal
17、l be in accordance with MIL-C-85049. Inspection of packaging: Shall be in accordance with MIL-C-85049. Methods of inspection: Shall be in accordance with MIL-C-85049. Approved sources of supply. Approved sources of supply are listed herein. Additional sources will be added as they become available.
18、The vendors listed herein have agreed to this drawing and a certificate of compliance has been submitted to DSCC-VAI. Vendor CAGE number DSCC drawing PIN 1/ 31461 06324 93036* E5401S 390HA005 1/ Parts must be purchased to this DSCC PIN to assure that all performance requirements and tests are met. Vendor CAGE Vendor name number and address 31461 Electro Adapter, Incorporated 20640 Nordhoff Street Chatsworth, CA 91311 06324 Glenair, Incorporated 1211 Air Way Glendale, CA 91201-2497 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
