1、 REVISIONSLTR DESCRIPTION DATE APPROVEDA Add device type 02. - CFS 05-10-19 Thomas M. Hess B Make corrections to vendor part numbers. For power dissipation capacitance with condition of VCCB= 3.3 V and VCCA= 2.5 V, delete “56 pF” and replace with “55 pF” as specified under Table I. Update boilerplat
2、e paragraphs to current requirements. - ro 11-04-12 Charles F. Saffle CURRENT DESIGN ACTIVITY CAGE CODE 16236 HAS CHANGED NAMES TO: DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 Prepared in accordance with ASME Y14.24 Vendor item drawing REV PAGE REV PAGE REV STATUS OF PAGES REV B B B B B B B B B
3、B B B B B B B B PAGE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 PMIC N/A PREPARED BY Phu H. Nguyen DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 Original date of drawing YY-MM-DD 05-07-07 CHECKED BY Phu H. Nguyen TITLE MICROCIRCUIT, LINEAR, 16 BIT 2.5 V TO 3.3 V / 3.3 V TO 5 V LEVEL SHIFTI
4、NG TRANSCEIVER WITH 3 STATE OUTPUTS, MONOLITHIC SILICON APPROVED BY Thomas M. Hess SIZE A CODE IDENT. NO. 16236 DWG NO. V62/05612 REV B PAGE 1 OF 17 AMSC N/A 5962-V036-11 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS
5、 COLUMBUS, OHIO SIZE A CODE IDENT NO. 16236 DWG NO. V62/05612 REV B PAGE 2 1. SCOPE 1.1 Scope. This drawing documents the general requirements of a high performance 16 bit 2.5 V to 3.3 V / 3.3 V to 5 V level shifting transceiver with 3-state outputs, with an operating temperature range of -40C to +8
6、5C for device type 01 and an operating temperature range of -55C to +125C for device type 02. 1.2 Vendor Item Drawing Administrative Control Number. The manufacturers PIN is the item of identification. The vendor item drawing establishes an administrative control number for identifying the item on t
7、he engineering documentation: V62/05612 - 01 X E Drawing Device type Case outline Lead finish number (See 1.2.1) (See 1.2.2) (See 1.2.3) 1.2.1 Device types. 1/ Device type Generic Circuit function 01 SN74ALVC164245-EP 16 bit 2.5 V to 3.3 V / 3.3 V to 5 V level shifting transceiver with 3-state outpu
8、ts 02 SN74ALVC164245-EP 16 bit 2.5 V to 3.3 V / 3.3 V to 5 V level shifting transceiver with 3-state outputs 1.2.2 Case outlines. The case outlines are as specified herein. Outline letter Number of pins JEDEC PUB 95 Package style X 48 MO-118 Plastic small outline package Y 48 MO-153 Plastic small ou
9、tline package 1.2.3 Lead finishes. The lead finishes are as specified below or other lead finishes as provided by the device manufacture: Finish designator Material A Hot solder dip B Tin-lead plateC Gold plateD PalladiumE Gold flash palladium Z Other _ 1/ Users are cautioned to review the manufactu
10、rers data manual for additional user information relating to this device. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO SIZE A CODE IDENT NO. 16236 DWG NO. V62/05612 REV B PAGE 3 1.3 Absolute maximum r
11、atings. 2/ 3/ Supply voltage range: (VCCA) . -0.5 V to 4.6 V (VCCB) . -0.5 V to 6.0 V Input voltage range: (VI) Except I/O ports 4/ -0.5 V to 6.0 V I/O port A 5/ . -0.5 V to VCCA+ 0.5 V I/O port B 4/ . -0.5 V to VCCB+ 0.5 V Input clamp current, (IIK) (VI 0) -50 mA Output clamp current, (IOK) (VO 0)
12、-50 mA Continuous output current, (IO) 50 mA Continuous current through each VCCor GND 100 mA Package thermal impedance, (JA) 6/: Case X . 63C/W Case Y . 70C/W Storage temperature range, (TSTG) . -65C to +150C 1.4 Recommended operating conditions. VCCBat 3.3 V and 5 V. 7/ 8/ Supply voltage, (VCCB) .
13、 +3.0 V to 5.5 V Minimum high level input voltage, (VIH) +2.0 V Maximum low level input voltage, (VIL): VCCB= 3.0 V to 3.6 V +0.7 V VCCB= 4.5 V to 5.5 V +0.8 V Input voltage, (VIB) 0 V to VCCBOutput voltage, (VOB) 0 V to VCCBMaximum high level output current, (IOH) . -24 mA Maximum low level output
14、current, (IOL) . 24 mA Input transition rise or fall rate, (t/v) . 10 ns/V Operating free air temperature range, (TA): Device type 01 . -40C to +85C Device type 02 . -55C to +125C _ 2/ For VCCB= 5 V and VCCA= 3.3 V, unless otherwise noted. 3/ Stresses beyond those listed under “absolute maximum rati
15、ngs” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute maximum rated conditions for extended periods may
16、 affect device reliability. 4/ This value is limited to 6.0 V maximum. 5/ This value is limited to 4.6 V maximum. 6/ The package thermal impedance is calculated in accordance with JESD 51-7. 7/ All unused inputs of the device must be held at the associated VCCor GND to ensure proper device operation
17、. Refer to the manufacturer data for more information. 8/ Use of this product beyond the manufacturers design rules or stated parameters is done at the users risk. The manufacturer and/or distributor maintain no responsibility or liability for product used beyond the stated limits. Provided by IHSNo
18、t for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO SIZE A CODE IDENT NO. 16236 DWG NO. V62/05612 REV B PAGE 4 1.5 Recommended operating conditions. VCCAat 2.5 V and 3.3 V. 7/ 8/ Supply voltage, (VCCA) . +2.3 V to 3.6 V Mini
19、mum high level input voltage, (VIH): VCCA= 2.3 V to 2.7 V +1.7 V VCCA= 3.0 V to 3.6 V +2.0 V Maximum low level input voltage, (VIL): VCCA= 2.3 V to 2.7 V +0.7 V VCCA= 3.0 V to 3.6 V +0.8 V Input voltage, (VIB) 0 V to VCCAOutput voltage, (VOB) 0 V to VCCAMaximum high level output current, (IOH): VCCA
20、= 2.3 V . -18 mA VCCA= 3.0 V . -24 mA Maximum low level output current, (IOL): VCCA= 2.3 V . 18 mA VCCA= 3.0 V . 24 mA Input transition rise or fall rate, (t/v) . 10 ns/V Operating free air temperature range, (TA): Device type 01 . -40C to +85C Device type 02 . -55C to +125C _ 7/ All unused inputs o
21、f the device must be held at the associated VCCor GND to ensure proper device operation. Refer to the manufacturer data for more information. 8/ Use of this product beyond the manufacturers design rules or stated parameters is done at the users risk. The manufacturer and/or distributor maintain no r
22、esponsibility or liability for product used beyond the stated limits. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO SIZE A CODE IDENT NO. 16236 DWG NO. V62/05612 REV B PAGE 5 2. APPLICABLE DOCUMENTS JE
23、DEC PUB 95 Registered and Standard Outlines for Semiconductor Devices (Applications for copies should be addressed to the JEDEC Office, 3103 North 10th Street, Suite 240-S, Arlington, VA 22201-2107 or online at http:/www.jedec.org) 3. REQUIREMENTS 3.1 Marking. Parts shall be permanently and legibly
24、marked with the manufacturers part number as shown in 6.3 herein and as follows: A. Manufacturers name, CAGE code, or logo B. Pin 1 identifier C. ESDS identification (optional) 3.2 Unit container. The unit container shall be marked with the manufacturers part number and with items A and C (if applic
25、able) above. 3.3 Electrical characteristics. The maximum and recommended operating conditions and electrical performance characteristics are as specified in 1.3, 1.4, and table I herein. 3.4 Design, construction, and physical dimension. The design, construction, and physical dimensions are as specif
26、ied herein. 3.5 Diagrams. 3.5.1 Case outlines. The case outlines shall be as shown in 1.2.2 and in figure 1. 3.5.2 Terminal connections. The terminal connections shall be as shown in figure 2. 3.5.3 Logic diagram and function table . The logic diagram and function table shall be as shown in figure 3
27、. 3.5.4 Load circuit and voltage waveforms. The load circuit and voltage waveforms be as shown in figure 4. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO SIZE A CODE IDENT NO. 16236 DWG NO. V62/05612 R
28、EV B PAGE 6 TABLE I. Electrical performance characteristics. 1/ Test Symbol Test condition 2/ 2.7 V VCCA 3.6 V 4.5 V VCCB 5.5 V unless otherwise noted VCCAVCCBDevice type Limit Unit Min Max High level output voltage VOH(B to A) IOH= -100 A 2.7 V to 3.6 V All VCC-0.2 V IOH= -12 mA 2.7 V 2.2 3.0 V 2.4
29、 IOH= -24 mA 3.0 V 2.0 High level output voltage VOH(A to B) IOH= -100 A 4.5 V 4.3 5.5 V 5.3 IOH= -24 mA 4.5 V 3.7 5.5 V 4.7 Low level output voltage VOL(B to A) IOL= 100 A 2.7 V to 3.6 V 0.2IOL= 12 mA 2.7 V 0.4 IOL= 24 mA 3.0 V 0.55 Low level output voltage VOL(A to B) IOL= 100 A 4.5 V to 5.5 V 0.2
30、 IOL= 24 mA 4.5 V to 5.5 V 0.55 Input current Control inputs IIVI= VCCA/VCCBor GND 5.5 V 5.5 V 5 A Off state output current A or B ports IOZ 3/ VO= VCCA/VCCBor GND 5.5 V 5.5 V 10 Supply current ICCVI= VCCA/VCCBor GND, IO= 0 5.5 V 5.5 V 40 Supply current change ICC4/ One input at VCCA/VCCB 0.6 V Othe
31、r inputs at VCCA/VCCBor GND 3.0 to 3.6 V 4.5 V to 5.5 V 750 Input capacitance Control inputs CIVI= VCCA/VCCBor GND 5.0 V 5.0 V 6.5 typical 5/ pF I/O capacitance A or B ports CIOVO= VCCA/VCCBor GND 3.3 V 3.3 V 8.5 typical 5/ See notes at end of table. Provided by IHSNot for ResaleNo reproduction or n
32、etworking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO SIZE A CODE IDENT NO. 16236 DWG NO. V62/05612 REV B PAGE 7 TABLE I. Electrical performance characteristics Continued. 1/ Test Symbol Test condition 2/ 2.7 V VCCA 3.6 V 4.5 V VCCB 5.5 V unless otherwise no
33、ted VCCAVCCBDevice type Limit Unit Min Max High level output voltage VOH(B to A) IOH= -100 A 2.3 V to 2.7 V 3.0 V to 3.6 V All VCCA -0.2 V IOH= -8 mA 2.3 V 3.0 V to 3.6 V 1.7 IOH= -12 mA 2.7 V 3.0 V to 3.6 V 1.8 High level output voltage VOH(A to B) IOH= -100 A 2.3 V to 2.7 V 3.0 V to 3.6 V VCCB-0.2
34、 IOH= -18 mA 2.3 V to 2.7 V 3.0 V 2.2 Low level output voltage VOL(B to A) IOL= 100 A 2.3 V to 2.7 V 3.0 V to 3.6 V 0.2 IOL= 12 mA 2.3 V 3.0 V to 3.6 V 0.6 Low level output voltage VOL(A to B) IOL= 100 A 2.3 V to 2.7 V 3.0 V to 3.6 V 0.2 IOL= 18 mA 2.3 V 3.0 V 0.55 Input current Control inputs IIVI=
35、 VCCA/VCCBor GND 2.3 V to 2.7 V 3.0 V to 3.6 V 5 A Off state output current A or B ports IOZ3/ VO= VCCA/VCCBor GND 2.3 V to 2.7 V 3.0 V to 3.6 V 10 Supply current ICCVI= VCCA/VCCBor GND, IO= 0 2.3 V to 2.7 V 3.0 V to 3.6 V 01 20 Supply current ICCVI= VCCA/VCCBor GND, IO= 0 2.3 V to 2.7 V 3.0 V to 3.
36、6 V 02 40 Supply current change ICC4/ One input at VCCA/VCCB 0.6 V Other inputs at VCCA/VCCBor GND 2.3 V to 2.7 V 3.0 V to 3.6 V All 750 See notes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMB
37、US, OHIO SIZE A CODE IDENT NO. 16236 DWG NO. V62/05612 REV B PAGE 8 TABLE I. Electrical performance characteristics Continued. 1/ Test Symbol Test condition Over recommended operating free air temperature range unless otherwise noted VCCB= 3.3 V 0.3 V VCCB= 5 V 0.5 V Unit VCCA= 2.5 V 0.2 VCCA= 2.7 V
38、 VCCB= 3.3 V 0.3 V Min Max Min Max Min Max Switching characteristics for device type 01. Propagation delay time from input A to output B tpd7.6 5.9 1 5.8 ns Propagation delay time from input B to output A 7.6 6.7 1.2 5.8 Enable time from input OE to output B ten11.5 9.3 1 8.9Disable time from input
39、OE to output B tdis10.5 9.2 2.1 9.5 Enable time from input OE to output A ten12.3 10.2 2 9.1Disable time from input OE to output A tdis9.3 9 2.9 8.6 Switching characteristics for device type 02. Propagation delay time from input A to output B tpd8.6 6.9 1 6.8 ns Propagation delay time from input B t
40、o output A 8.6 7.7 1.2 6.8 Enable time from input OE to output B ten12.5 10.3 1 9.9Disable time from input OE to output B tdis11.5 10.2 2.1 10.5 Enable time from input OE to output A ten14.5 11.2 2 10.1Disable time from input OE to output A tdis11.3 11 2.9 10.6 See footnotes at end of table. Provide
41、d by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO SIZE A CODE IDENT NO. 16236 DWG NO. V62/05612 REV B PAGE 9 TABLE I. Electrical performance characteristics Continued. 1/ Test Symbol Test condition Over recommend
42、ed operating range unless otherwise noted VCCB= 3.3 V VCCB= 5.0 V Unit VCCA= 2.5 V VCCA= 3.3 V Typical Typical Operating characteristics for device type 01 and device type 02. Power dissipation capacitance Output enabled (B) CpdCL= 50 pF, f = 10 MHz, TA= 25C 55 56 pF Output disabled (B) 27 6 Output
43、enabled (A) 118 56 Output disabled (A) 58 6 1/ Testing and other quality control techniques are used to the extent deemed necessary to assure product performance over the specified temperature range. Product may not necessarily be tested across the full temperature range and all parameters may not n
44、ecessarily be tested. In the absence of specific parametric testing, product performance is assured by characterization and/or design. 2/ For device type 01, the temperature range is -40C TA +85C. For device type 02, the temperature range is -55C TA +125C. 3/ For I/O ports, the parameter IOZ.include
45、s the input leakage current. 4/ This is the increase in supply current for each input that is at one of the specified TTL voltage levels, rather than at 0 or the associated VCC. 5/ Typical values are measured at VCCA= 3.3 V and VCCB= 5 V, TA= 25C. Provided by IHSNot for ResaleNo reproduction or netw
46、orking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO SIZE A CODE IDENT NO. 16236 DWG NO. V62/05612 REV B PAGE 10 Case X Symbol Millimeters Inches Symbol Millimeters Inches Min Max Min Max Min Max Min Max A 2.79 .110 E 10.03 10.67 .395 .420 A1 0.20 .008 E1 7.39
47、 7.59 .291 .299 b 0.20 0.34 .008 .013 e 0.63 BSC .002 BSC c 0.13 0.25 .005 .010 L .51 1.02 .020 .040 D 15.75 16.00 .620 .630 Notes: 1. This drawing is subject to change without notice. 2. Body dimensions do not include mold flash or protrusion not to exceed 0.006 inches (0.15 mm). 3. Falls within JEDEC MO-118. FIGURE 1. Case outlines. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO SIZE A CODE IDENT NO. 16236 DWG NO. V62/05612 REV B PAGE 11 Case Y Symbol Millimeters Symbol Millimeters Mi
