1、INCH-POUND MIL-DTL-13791/13 15 January 2009 DETAIL SPECIFICATION SHEET DISTRIBUTOR COVER ASSEMBLY, 6 CONNECTOR CAP This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this sp
2、ecification sheet and MIL-DTL-13791. A - A FIGURE 1. Distributor cover assembly. AMSC N/A FSC 2920 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-13791/13 Inches mm Inches mm .003 0.08 1.984 50.39.375 9.52 2.500 63.50.625 15.88 2.562 65.071.
3、000 25.40 2.750 69.851.250 31.75 3.188 80.981.359 34.52FIGURE 1. Distributor cover assembly - Continued. 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-13791/13 3Inches mm .188 4.77.312 7.92.771 19.83NOTES: 1. Dimensions are in inches. 2. M
4、etric equivalents are for information only. FIGURE 1. Distributor cover assembly - Continued. Dimensions and configurations: See figure 1. Referenced document. This document references MIL-DTL-13791. CONCLUDING MATERIAL Custodians: Preparing activity: Army - AT DLA - CC Navy - SH DLA - CC (Project 2
5、920-2008-014) Review activities: Army - CR, CR4 Navy - MC NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
