1、INCH-POUND MIL-DTL-13791/14 15 January 2009 DETAIL SPECIFICATION SHEET DSTRIBUTOR COVER ASSEMBLY, CAP This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification s
2、heet and MIL-DTL-13791. FIGURE 1. Distributor cover assembly. AMSC N/A FSC 2920 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-13791/14 2Inches mm Inches mm.003 0.08 2.562 65.07.010 0.25 2.750 69.85.334 8.74 3.000 76.201.574 39.98 3.064 77.8
3、21.984 50.39 3.188 80.97FIGURE 1. Distributor cover assembly - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-13791/14 3Inches mm .344 8.74.771 19.583.438 88.36NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given fo
4、r information only. FIGURE 1. Distributor cover assembly - Continued. Dimensions and configurations: See figure 1. Referenced document. This document references MIL-DTL-13791. CONCLUDING MATERIAL Custodians: Preparing activity: Army - AT DLA - CC Navy - SH DLA - CC (Project 2920-2008-015) Review act
5、ivities: Army - CR, CR4 Navy - MC NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
