1、INCH-POUND MIL-DTL-13791/17 15 January 2009 DETAIL SPECIFICATION SHEET ROTOR ASSEMBLY MOUNT This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and M
2、IL-DTL-13791. FIGURE 1. Rotor assembly mount. AMSC N/A FSC 2920 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-13791/17 2Inches mm Inches mm .625 15.88 4.000 101.601.000 25.40 4.750 120.651.250 31.75 7.500 190.502.250 57.15 9.625 244.483.125
3、 79.38 11.500 292.103.500 88.90 15.500 393.70NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. FIGURE 1. Rotor assembly mount - Continued. Dimensions and configurations: See figure 1. Referenced document. This document references MIL-DTL-13791. CONCLUDING MATE
4、RIAL Custodians: Preparing activity: Army - AT DLA - CC Navy - SH DLA - CC (Project 2920-2008-018) Review activities: Army - CR, CR4 Navy - MC NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
