1、INCH-POUND MIL-DTL-13791/5 15 January 2009 DETAIL SPECIFICATION SHEET IGNITION DISTRIBUTOR ASSEMBLY, WITH COIL This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specif
2、ication sheet and MIL-DTL-13791. FIGURE 1. Distributor assembly with ignition coil. AMSC N/A FSC 2920 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-13791/5 Inches mm Inches mm .505 12.83 2.550 64.77.510 12.95 2.880 73.15.640 16.26 3.640 92.
3、461.690 42.93 4.190 106.431.810 45.97 4.340 110.241.88 47.75 4.660 118.362.120 53.85 8.630 219.202.310 58.67 8.730 221.742.490 63.25NOTES: 1. Dimensions are in inches. 2. Metric equivalents are for information only. FIGURE 1. Distributor assembly with ignition coil - Continued. 2Provided by IHSNot f
4、or ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-13791/5 3Dimensions and configurations: See figure 1. Referenced document. This document references MIL-DTL-13791. CONCLUDING MATERIAL Custodians: Preparing activity: Army - AT DLA - CC Navy - SH DLA - CC (Project
5、2920-2008-007) Review activities: Army - CR, CR4 Navy - MC NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
